锻压技术

基于应变非接触测量的裂纹拼接

英文标题：Crack spliced based on non-contact strain measurement

作者：李亚男万敏吴向东

单位：北京航空航天大学

分类号：TG386

出版年,卷(期):页码：2013,38(6):111-115

摘要：

使用基于图像处理的非接触网格应变测量法绘制板料成形极限图，通常选取裂纹边缘网格测量应变，测量值较理论值偏小，甚至相差较多。本文使用图像处理方法，分别建立了基于多目视觉和显微测量镜头的裂纹拼接算法，可对难变形件裂纹处网格进行拼接测量。试验结果表明，两种拼接算法均满足精度要求，前者误差为1.5%，后者为1%，对于改进成形极限图的测量方法、提高成形极限图的测量精度具有一定的参考作用。

To plot forming limit diagram of sheet metal based on the method of non-contact grid measurement using image processing, grids around the crack were selected to measure strain. the measurement value was smaller than theoretical value and even having more difference. Using image processing methods, The crack spliced algorithms based on visual and microscopic measuring lens were respectively established, which could splice crack on the difficult deformation sheet for measurement. The result shows that the two splicing algorithm can satisfy the requirements of precision, the error is 1.5% and 1% respectively,it is of a certain reference for improving the method of measurement of forming limit diagram and the measuring accuracy of forming limit diagram.

基金项目：

国家科技重大专项资助项目“高档数控机床与基础制造装备”(2009ZX04014-076)

参考文献：

[1]Keeler S P, Backofen W A. Plastic instability and fracture in sheets stretched over rigid[J]. Punches Trans., ASM., 1965,(56):25-48.

[2]Goodwin G M. Application of strain analysis to sheet metal forming problems in the press shop[J]. SAE Trans., 1968，(680093):380-397.

[3]Nakazima K,Kikuma T. Study on the formability of steel sheets[J]. Yawata Technical Report, 1968,(264): 8517-8530.

[4]Hecker S S. Fomability of HSLA steel sheets[J]. Metals Engineering Quarterly,1973,(8):42-48.

[5]Zdzislaw Marciniak, Kazimierz Kuczynski. Limit strains in the processes of stretch-forming sheet metal[J]. International Journal of Mechanical science, 1967,(9): 609-620.

[6]GB/T 15825.8—1995.金属薄板成形性能与试验方法成形极限图(FLD)试验[S].GB/T 15825.8—1995. Sheet metal formability and test methods forming limit diagram(FLD)test[S].

[7]张敏，陆辛，李祥平.一种先进的板材成形应变测量网格印刷技术[J].锻压技术，2005，30（3）：66-68.Zhang M, Lu X,Li X P. Advanced grid-scribed technology for measuring the sheet forming strain[J]. Forging & Stamping Technology,2005,30(3):66-68.

[8]闫蓓,王斌,李媛. 基于最小二乘法的椭圆拟合改进算法[J].北京航空航天大学学报,2008,34(3):295-298.Yan B, Wang B, Li Y. Optimal ellipse fitting method based on least 2 square principle[J]. Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(3):295-298.

[9]杨淑莹.VC++图像处理程序设计[M].北京:清华大学出版社/北京交通大学出版社,2005.Yang S Y. The Program Design of Image Processing Using VC++[M]. Beijing: Tsinghua University Press/Beijing Jiaotong University Press, 2005.

[10]李震,洪添胜,吴伟斌,等.双线性插值算法在荔枝树光合模拟中叶片图像旋转中的应用[J].农业工程学报,2006,22(11):94-96.Li Z, Hong T S, Wu W B, et al. Application of bilinear interpolation algorithm in litchi leaf image rotation for photo synthetic simulation[J]. Transactions of the CSAE, 2006, 22(11):94-96.

服务与反馈：

【文章下载】【加入收藏】