锻压技术

中门导轨滑轮固定板精密级进模设计

英文标题：Design of precise progressive die for the guide pulley fixing plate of center door

作者：蒙以嫦

单位：柳州职业技术学院

分类号：

出版年,卷(期):页码：2014,39(1):95-99

摘要：

分析了中门导轨滑轮固定板的成形特点，确定采用精密级进模冲压生产。介绍了制件排样设计、模具结构设计及模具关键零部件设计。模具采用辊式自动送料机构作粗定位、导正销精定位及3种浮料装置，保证了送料精度。工作零件全部采用镶拼式结构，便于加工、装配、调整和维修。投入批量生产后，实践表明，模具结构合理、操作方便，满足了零件批量大、高效、优质的生产要求。

The technological characteristics of center door guide pulley fixing plate were analyzed, and the precise progressive die was determined to produce.The design of the part layout, die structure and key components was introduced. The automatic feeding mechanism as rough location, accurate positioning by pilot pin and three types of floating material device were adopted for the die which guaranteed the feeding precision. The insert structure was applied in all the functional parts which is easily for manufacturing，assembling, modification and repairing.After mass production, the practice shows that the structure of die is reasonable and convenient operation,meanwhile it meets the production desire of mass production,high efficiency and good quality.

基金项目：

2012年度广西高等学校一般资助科研项目（201203YB196）

蒙以嫦（1966-），女，本科，高级工程师

参考文献：

[1]刘军,傅贵武. 微型电机金属外壳的大拉深级进模设计[J].锻压技术,2012,37（3）: 109-113.

Liu Jun, Fu Guiwu. Design of big drawing progressive die for micro motor metal shell[J].Forging & Stamping Technology, 2012,37（3）: 109-113.

[2]向小汉，前隔板侧板多工位级进模设计[J].模具工业,2012,(10):28-33.

Xiang Xiaohan. Progressive die for side plate of front separator[J].Die & Mould Industry,2012,(10):28-33.

[3] 庞芳,接触簧片多工位级进模设计[J].模具工业,2011,(10):32-36.

Pang Fang. Multi-position progressive die for contact spring[J].Die & Mould Industry,2011,(10):32-36.

[4]李昌雪,李捷,定位支架级进模设计[J].模具工业,2011,(5):37-40.

Li Changxue,Li Jie. Design of progressive die for spacer positioning bracket[J].Die & Mould Industry, 2011,(5):37-40.

[5] 周维铠,郭银芳. 冠形齿片精冲级进模设计[J].模具工业,2011,(3):36-39.

Zhou Weikai,Guo Yinfang. Development offine-blanking progressive die for coronary sheet gear[J].Die & Mould Industry, 2011,(3):36-39.

[6]文建平.压板冲孔、切断、弯曲级进模设计[J].锻压技术,2012,37（4）: 90-93.

Wen Jianping. Progressive die design for plate punching, cutting and bending processes[J].Forging & Stamping Technology,2012,37（4）: 90-93 .

[7] 何敏红，王树勋.悬挂件多工位级进模的设计[J].锻压技术,2012,37（5）: 115-117.

He Minhong，Wang Shuxun. Design of multi-position progressive die for suspension component[J].Forging & Stamping Technology, 2012,37（5）: 115-117.

服务与反馈：

【文章下载】【加入收藏】