锻压技术

基于克隆装配的压力机机身参数化设计

英文标题：Parametric design of press machine body based on clone assembly

作者：尚慧慧夏琴香徐海涛李振石

分类号：TP391.7

出版年,卷(期):页码：2014,39(2):109-113

摘要：

机械压力机属于单件小批量生产，长期以来，在产品设计方面，花费了大量时间和人力。以UG软件为设计平台，结合草图、表达式引用、抑制等技术建立了压力机机身的参数化模板文件；通过UG/OPEN UIStyler和MenuScript设计了菜单和对话框；在Visual C++环境中创建应用程序工程，基于克隆装配技术，开发了压力机机身参数化设计系统，有效地缩短了压力机开发周期，可快速适应瞬息万变的市场需求。

The manufacturing of mechanical press belongs to the single and small batch production. For a long time, a great deal of time and manpower have been spent during product design. The parametric model for press machine body was established based on UG software by combining with the sketches, expression references, inhibition and so on. The menu and dialog box were designed through UG/OPEN UIStyler and MenuScript. The parametric design system of press machine body was developed based on clone assembly technology through the creation of application project in Visual C++ environment. The development period of press machine is shortened effectively, which can meet the needs of fast-changing market rapidly.

基金项目：

顺德区产学研合作项目（2012CXY01）；广东省企业科技特派员工作站项目（2010B090500012）

尚慧慧（1987-），女，硕士研究生

参考文献：

［1］张开运，田怀文.基于UG 的产品级三维参数化设计研究[J].计算机应用技术，2011，38（2）：36-40.Zhang Kaiyun,Tian Huaiwen. Research of product-level three-dimensional parametric design based on UG [J]. Computer Ap-plication Technology, 2011, 38 (2)：36-40.
［2］鲍新强，高荣慧.锻压机典型零件的参数化设计[J].机械制造与研究，2007，（1）:21-23.Bao Xinqing,Gao Ronghui. Parameterized design for the typical parts of forging press[J]. Mechanical Manufacturing and Research,2007，（1）:21-23.
［3］胡伟伟.机械压力机参数化设计的研究[D].南京：南京理工大学，2009.Hu Weiwei. Research of Parametric Design for Mechanical Press[D].Nanjing:Nanjing University of Science & Technology, 2009.
［4］夏琴香，袁宁.模具设计及计算机应用[M].广州：华南理工大学出版社，2008.Xia Qinxiang,Yuan Ning. Design of Die and Computer Application [M]. Guangzhou: South China University of Technology Press, 2008.
［5］赵波，范平清，赵晓星.基于WAVE和克隆装配的车身变形设计[J].研究与开发，2009,（11）：45-56.Zhao Bo, Fan Pingqing, Zhao Xiaoxing. Deformation design of car body based on wave and clone assembly[J]. Research and Develop， 2009,（11）：45-56
［6］吴伟伟，唐任仲，侯亮，等.基于参数化的机械产品尺寸变型设计研究与实现[J].中国机械工程，2005，16（3）：218-222.Wu Weiwei,Tang Renzhong,Hou Liang,et al. Research & realization on the variant design of mechanical products based on parametric techniques[J].China Mechanical Engineering, 2005，16（3）：218-222.
［7］夏琴香，李思漪，叶福源，等.基于UG的多工位级进模模架设计模块开发[J].模具工业,2013,39(5):19-23.Xia Qinxiang,Li Siyi,Ye Fuyuan,et al.The module for designing multi_position progressive die sets based on UG secondary development[J].Die & Mould Industry,2013,39(5):19-23.
［8］Kimand S H, Lee K. An assembly modeling system　for dynamic and kinematic analysis[J].Computer Aided Design,1989, 21(1): 2-12.
［9］Rajneet S,Joshua U T. Towards modeling of assembly of product design[J].Computer Aided Design,1994,26 (2) : 85-97.
［10］王晓英,李森.基于UG NX 的模具三维建模与装配设计[J].机械设计与制造,2007,(1):146-148.Wang Xiaoying, Li Sen. The 3D modeling and assembly process based on UG NX [J]. Mechanical Design and Manufacturing, 2007,(1):146-148.
［11］侯永涛,丁向阳.UG/Open二次开发与实例精解[M].北京:化学工业出版社, 2007.Hou Yongtao, Ding Xiangyang. UG/Open Secondary Development and Case-based Explanation[M].Beijing :Chemical Industry Press, 2007.

服务与反馈：

【文章下载】【加入收藏】