锻压技术

弧形砧砧型参数对车轴锻件拔长效率的影响

英文标题：Influences of anvil type parameters on stretching efficiency of axle forgings with arc anvil

作者：谭波易幼平何海林

单位：中南大学

关键词：弧形砧砧型拔长有限元模拟车轴

分类号：TH16；TH316

出版年,卷(期):页码：2014,39(3):5-9

摘要：

以不同砧型的弧形砧为研究对象，利用Deform-3D有限元模拟软件对车轴锻件的拔长过程进行了数值模拟研究，分析了不同砧型的弧形砧对拔长效率的影响。研究表明：随着弧形砧的圆弧半径R减小、圆弧所对应的圆心角θ增大，拔长效率增加，所需的最大锻造力也增大。相同工况下，使用带预成形段型弧形砧比使用普通弧形砧对设备的吨位要求更低，且能保持较高的拔长效率，适用范围更广。

The numerical simulation of stretching process of axle forgings which studied on different types of arc anvils was carried out by Deform-3D professional forging simulation software. The influences of anvil types on the efficiency of stretching with arc anvil were analyzed. The results show that both of the efficiency of stretching with arc anvil and the maximum forging force increase as the arc radius of arc anvil decreases and the central angle increases. Under the same condition, lower tonnage is required for the equipment when stretching by the arc anvil with the preforming part than stretching by ordinary arc anvil. Stretching by the arc anvil with the preforming part not only can keep high efficiency of stretching, but also has a wider range of application.

基金项目：

国家科技重大专项资助项目（2012ZX04010-081）

参考文献：

［1］关大伟. HXD3B机车车轴加工工艺研究[D]. 大连：大连交通大学，2010.Guan Dawei. Study on Machining Process of the HXD3B Electrical Locomotive's Axles[D]. Dalian：Dalian Jiaotong University，2010.
［2］张鹏，夏琴香，李哲林，等. 长轴类大锻件自由锻造工艺研究[J]. 锻压技术，2011，36(1)：21-25.Zhang Peng, Xia Qinxiang, Li Zhelin, et al. Research on free-forging process of long-shaft heavy forging[J]. Forging & Stamping Technology, 2011，36(1):21-25.
［3］张振强，辛选荣，刘汀. 自由锻拔长效率研究[J]. 锻压装备与制造技术，2006，41(6): 50-53.Zhang Zhenqiang, Xin Xuanrong, Liu Ting. Research on drawing efficiency in free forging[J]. China Metalforming Equipment & Manufacturing Technology, 2006, 41(6): 50-53.
［4］陈颖，任运来，聂绍珉. 凹面砧方坯拔长研究[J]. 大型铸锻件，2001，(3): 22-25.Chen Ying, Ren Yunlai, Nie Shaomin. Study on the stretching process for square blank with concave anvil[J]. Heavy Casting and Forging, 2001，(3): 22-25.
［5］赵玲玲，杜凤山，黄华贵，等. 大锻件锻造拔长砧型[J]. 材料工程学报，2009，16(6)：28-32.Zhao Lingling, Du Fengshan, Huang Huagui, et al. Research on shape anvils for drawing in free hot forging[J]. Journal of Plasticity Engineering, 2009, 16(6): 28-32.
［6］任运来，聂绍珉，牛龙江，等. 大型锻件锻造拔长新工艺[J]. 机械工程学报，2007，43(11)：224-228.Ren Yunlai, Nie Shaomin, Niu Longjiang, et al. New drawing technics of large forges[J]. Chinese Journal of Mechanical Engineering, 2007，43(11): 224-228.
［7］张莉萍，倪利勇，刘助柏，等. 水平V型砧连续拔长工艺的数值模拟[J]. 机械设计与制造，2009，(7): 231-232.Zhang Liping, Ni Liyong, Liu Zhubai, et al. Numerical simulation of continuous stretching with horizontal V-shaped anvils[J]. Machinery Design & Manufacture, 2009，(7) : 231-232.
［8］Dyja H,Banaszek G,Mróz S,et al. Modeling of shape anvils in free hot forging of long products[J]. Journal of Materials Processing Technology, 2004，（157-158）: 131-137.
［9］王万阁. 锻钢用圆弧砧子[J]. 钢铁，1966，(5): 56-57.Wang Wange. Arc anvil for forging steel[J]. Iron & Steel, 1966，(5): 56-57.
［10］刘德明. 采用弧形砧子锻制圆钢[J]. 钢铁，1956，(18): 44-46.Liu Deming. Forging round steel with arc anvil [J]. Iron & Steel, 1956，(18): 44-46.
［11］邢国海，奚玉刚，邓智辉. 快锻压机弧形砧改造[J]. 大型铸锻件，2004，(1): 42-44.Xing Guohai, Xi Yugang, Deng Zhihui. The upgrading of the arc anvil for the fast forging press[J]. Heavy Casting and Forging, 2004，(1): 42-44.
［12］姚泽坤. 锻造工艺学与模具设计[M]. 西安：西北工业大学出版社，2007.Yao Zekun. Forging Technology and Die Design[M]. Xi'an: Northwestern Polytechnical University Press, 2007.
［13］刘冬梅. 大型锻件锻造新理论与新工艺的数值模拟[D]. 秦皇岛：燕山大学，2001.Liu Dongmei. Numerical Simulation of New Theory and New Technology of Heavy Forgings[D]. Qinhuangdao: Yanshan University，2001.

服务与反馈：

【文章下载】【加入收藏】