锻压技术

板料V形自由折弯成形数据库校正方法

英文标题：Correction method of database in V-shaped air-bending forming of metal sheet

作者：张彤张李超余俊赵祖烨

单位：华中科技大学

分类号：TG386

出版年,卷(期):页码：2014,39(3):57-61

摘要：

自由折弯因其模具通用性好、加工效率高，因而在小批量板料折弯成形中得到广泛应用。但对其加工精度的控制，特别对与成形角度直接相关的V形板料折弯滑块下压量的精度控制一直是业内一个难点问题。为获得更高的角度精度，常采用多次试折法，渐进达到加工要求，且对加工人员经验要求较高。对自由折弯成形中滑块下压量进行理论计算推导，提出一种通过角度经验校正数据库修正理论计算的方法。基于以上方法在不同模具上使用不同厚度的Q235和不锈钢板料进行不同折弯角度折板实验，两次试折后，实验折弯角度误差在±0.5°，满足国标GB/T 14349-2011中对钣金产品折弯角度的精度要求。该方法已应用于本实验室自主研发的折弯机数控系HNC-SPB60中。

Air bending is widely applied in small batch sheet bending for its good universality and high efficiency. However the machining precision is difficult to maintaining, especially the punch downward displacement which is directly relative to the forming angle. In order to improve the precision, trial and error method is often applied to reach the demand step by step, and an abundant experience requirement for the processing personnel is of necessity. The theoretical derivation of punch downward displacement when air bending was deduced, and a theoretical calculation method corrected by angle database was put forward. Based on the above mentioned method, experiments were conducted under different bending angles with different thicknesses of Q235 and stainless steel. After twice bending, the angle error can be controlled within ±0.5°, which satisfies the requirement of the GB/T 14349-2011 standard. The method has already been applied in the independent numerical control system HNC-SPB60 for sheet bending machine.

基金项目：

国家科技重大专项资助项目 (2012ZX04001-012)

参考文献：

［1］肖业兴,马铁军. 金属薄板冲压成形的有限元模拟研究[J]. 锻压技术,2012,37(1):165-168.Xiao Yexing,Ma Tiejun. FEM simulation of sheet metal stamping[J]. Forging & Stamping Technology, 2012, 37(1):165-168.
［2］王飞,游有鹏. 钣金V形折弯成形的回弹控制研究[J]. 材料科学与工艺,2012, 20(2):35-38,44.Wang Fei, You Youpeng. Study on springback control of V-bending process of metal sheet[J]. Materials Science and Technology, 2012, 20(2):35-38,44.
［3］王飞,游有鹏. 钣金V形折弯回弹影响因素的有限元分析[J]. 沈阳工业大学学报,2012,34（5）:526-529,535.Wang Fei, You Youpeng. Finite element analysis on influencing factors of springback in sheet metal V-bending[J]. Journal of Shenyang University of Technology,2012,34(5):526-529,535.
［4］de Vin L J, Streppel A H, Kals H J J, et al. Sensitivity analysis for air bending[A]. Proceedings of the 3rd International Conference on Sheet Metal[C]. Birmingham:1995.
［5］de Vin L J, Streppel A H,Lutters D, et al. A process model for air bending in CAPP applications[A]. Proceedings of the 2nd International Conference on Sheet Metal[C]. Belfast:1994.
［6］De Vin L J. Expecting the unexpected, a must for accurate brakeforming[J]. Journal of Material Processing Technology, 2001, 117,244-248.
［7］Joost R. Duflou, József Vncza, Richard Aerens. Computer aided process planning for sheet metal bending: A state of the art[J]. Computers in Industry,2005,56:747-771.
［8］余松敏. 折弯机自由折弯时制件角度误差的原因分析与对策[J]. 机械研究与应用,1996,(1):24-26.Yu Songmin. Bending angle error analysis and strategy of air bending in sheet bending machine[J]. Mechanical Research & Application, 1996,(1):24-26.
［9］余松敏. 自由折弯方式下数控折弯机滑块进深计算和实用公式[J]. 锻压技术,1994,19( 3):23-25.Yu Songmin. Calculation and practical formulas of punch downward displacement for air bending in numerical control sheet bending machine[J].Forging & Stamping Technology, 1994, 19(3):23-25.
［10］魏春雷,徐慧民.冲压工艺与模具设计[M]. 北京:北京理工大学出版社,2009.Wei Chunlei, Xu Huimin. Stamping Process and Die Design[M]. Beijing: Beijing Institute of Technology Press,2009.
［11］GB/T 14349-2011.板料折弯机精度[S].GB/T 14349-2011.Press brake-testing of the accuracy[S].

服务与反馈：

【文章下载】【加入收藏】