锻压技术

塑性变形中应力状态与应力状态参数的关系

英文标题：Relationship of stress state and stress state parameters in plastic deformation

作者：李庆华冀方冉李付国

单位：西北工业大学

分类号：TG335.19

出版年,卷(期):页码：2014,39(3):122-126

摘要：

材料的变形性能不仅与其化学成分和组织状态有关，还与变形时的应力状态有关，应力三轴度、软性系数和罗德参数是研究金属材料变形、损伤、开裂时常用的应力状态参数，本文计算和分析了塑性变形过程中9种不同应力状态和不同应力幅值下各参数值的变化情况，结果表明，应力三轴度与应力状态间有较好的对应关系；软性系数和罗德参数只有在平面屈服应力状态下才与应力状态具有很好的对应关系；在三向屈服应力状态下，软性系数和罗德参数不能直接反映不同的应力状态和变形类型。

The deformation performance of material is not only related to its chemical composition and microstructure, but also related to the stress state of forming. Stress triaxiality, soft coefficient and Rod parameter are commonly used as stress state parameters in studying the deformation, damage and cracking of metal material. The parameters under nine different stress states and stress amplitudes in plastic forming process were calculated and analyzed. The results show that the stress triaxiality and stress state have a good correspondence, while soft coefficient and Rod parameter have a better correspondence only under plane state of yield stress. Under three dimensional state of yield stress, soft coefficient and Rod parameter can not directly reflect different stress states and deformation types.

基金项目：

国家自然科学基金资助项目（51275414）

参考文献：

[1]王仲仁. 塑性加工力学基础[M]. 北京: 国防工业出版社， 1989.Wang Zhongren. Plastic Processing Mechanics Foundation[M]. Beijing: National Defence Industry Press，1989.[2]李洪洋, 王仲仁. 应力莫尔圆变化分析及其在典型液力塑性变形中的应用[J]. 应用基础与工程科学学报, 2006，14(1):59-68.Li Hongyang, Wang Zhongren. Analysis of stress Mohr circle change and its application in a typical hydraulic plastic deformation[J]. Journal of Basic Science and Engineering, 2006, 14(1): 59-68.[3]He Z B, Hu W L，Wang Z R. Graphic representing of stress components and its application in metal forming[A]. Proceedings of the 8th ICTP[C].Italy: 2005.[4]马凯, 李智慧, 唐安民. 金属材料断裂与应力状态参数的关系[J]. 西安理工大学学报, 2007, 23(2): 201-204.Ma Kai, Li Zhihui, Tang Anmin. The relation between fracture of metal material and stress state parameter[J]. Journal of Xian University of Technology, 2007, 23(2): 201-204.[5]Kim J, Gao X S, Srivatsan T S. Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity[J]. Engineering Fracture Mechanics, 2004, 71(3):379-400.[6]Rice J R, Dennis M T. On the ductile enlargement of voids in triaxial stress fields[J]. Journal of the Mechanics and Physics of Solids,1969, 17: 201-217.[7]束德林. 工程材料力学性能[M]. 北京: 机械工业出版社. 2003.Shu Delin. The Mechanical Properties of Engineering Materials[M]. Beijing: China Machine Press, 2003.[8]苑世剑, 李峰,何祝斌. 塑性变形类型与罗德系数的关系[J]. 哈尔滨工业大学学报, 2008, 40(1): 59-64.Yuan Shijian, Li Feng, He Zhubin. Relationship between Lode parameter and deformation type[J]. Journal of Harbin Institute of Technology, 2008, 40(1): 59-64.[9]俞汉清.金属塑性变形原理[M]. 北京: 机械工业出版社, 1999.Yu Hanqing. The Principle of Metal Plastic Deformation[M]. Beijing: China Machine Press,1999.[10]李庆华. FGH96合金复杂盘件等温制坯与成形工艺研究[D]. 西安：西北工业大学, 2010.Li Qinghua. Study on the Isothermal Preform and Forging of Superalloy FGH96 Disk[D]. Xi'an: Northwestern Polytechnical University, 2010.

服务与反馈：

【文章下载】【加入收藏】