锻压技术

某炉具燃烧器零件多工位级进模设计

英文标题：Design of multi-position progressive die for parts in stove burner

作者：上官雄辉王霆夏琴香邱遵文赵学智

分类号：

出版年,卷(期):页码：2014,39(4):93-96

摘要：

某炉具燃烧器零件结构复杂，需经冲裁、拉深、整形、冲孔、翻边、弯边、预弯、压平等多道工序完成。通过对该炉具燃烧器的零件结构、冲压成形工艺性和工艺方案进行分析，确定了采用14工位级进模进行制件成形的冲压工艺方案，并设计了排样图；分析了级进模整体、斜楔压弯和包边压平等装置的结构特点，并对主要零部件进行了设计改进。生产试验表明，该级进模设计合理、工作可靠、生产效率高，能够满足炉具燃烧器零件的大批量生产要求。

The stove burner needs blanking, drawing, shaping, piercing, flanging, flange bending,pre-bending, flattening and other processes to be produced for its complicated structure. The structure, stamping processes and schemes of stove burner were analyzed, then the fourteen positions progressive stamping processes for manufacturing parts was determined and the layout was designed. The structural features of overall structure, cam driver bending and hemming-flattening structure were studied, and the main parts of progressive die were designed and improved. The production tests prove that the die structure is reasonable, reliable and high efficient, and suitable for mass production of parts in stove burner.

基金项目：

广东省中国科学院全面战略合作项目（2012B091100251）

上官雄辉（1966-）男，学士，工程师

参考文献：

[1]张冬霞，冯良. 燃烧器发展简史[J]. 工业加热，2007，36(2)：41-43.

Zhang Dongxia，Feng Liang. The development history of burner[J]. Industrial Heating，2007，36(2):41-43.

[2]杨义，孙慧，王梅. 我国城市燃气发展现状与展望[J].油气储运，2011，30(10)：725-728.

Yang Yi，Sun Hui，Wang Mei. Present situation and prospect of city gas development in our country[J]. Oil & Gas Storage and Transportation，2011，30(10):725-728.

[3]沈辉. 燃气炉具燃烧器优化设计[J]. 科技创新导报，2011,(9)：111.

Shen Hui. Optimum design of gas stove burner[J]. Science and Technology Innovation Herald，2011，(9):111.

[4]余康. 一种引射管采用文丘里管延伸结构的燃烧器[A]. 中国土木工程学会燃气分会年会论文集[C].昆明,2012.

Yu Kang. A burner with the ejector using venturi tube structure[A]. Proceedings of China Civil Engineering Society Gas Branch Conference[C].Kunming,2012.

[5]陈炎嗣. 多工位级进模设计与制造[M]. 北京：机械工业出版社，2006.

Chen Yansi. Design and Manufacture of Multi-position Progressive Die[M]. Beijing: China Machine Press，2006.

[6]陈志超，夏琴香，郭新年，等. 某高强钢板汽车结构件多工位级进模设计[J]. 锻压技术，2012，37(2)：47-50.

Chen Zhichao，Xia Qinxiang，Guo Xinnian，et al. Design of multi-position progessive die of structural part made by high-strength steel[J]. Forging & Stamping Technology，2012，37(2):47-50.

[7]伍俊棠，赵亦希，李淑慧，等. 滚压包边角度对包边件轮廓尺寸变动的影响[J]. 锻压技术，2010，35(3)：29-33.

Wu Juntang，Zhao Yixi，Li Shuhui，et al. Effect of hemming angle on dimensional deviation during roller hemming process [J]. Forging & Stamping Technology，2010，35(3):29-33.

[8]杨宽，刘桂萍，杨旭静，等. 汽车覆盖件包边机构运动分析与包边仿真[J]. 汽车工程，2012，34(3)：272-276.

Yang Kuan，Liu Guiping，Yang Xujing，et al. Hemming mechanism kinematic analysis and hemming simulation for vehicle closure panels[J]. Automotive Engineering，2012，34(3): 272-276.

[9]肖祥芷，王孝培. 冲压模具设计[M]. 北京：电子工业出版社，2007.

Xiao Xiangzhi，Wang Xiaopei. Stamping Die Design[M]. Beijing: Publishing House of Electronics Industry，2007.

[10]夏琴香，袁宁. 模具设计及计算机应用[M]. 广州：华南理工大学出版社，2008.

Xia Qinxiang，Yuan Ning. Die & Mould Design and Computer Applications[M]. Guangzhou: South China University of Technology Press，2008.

服务与反馈：

【文章下载】【加入收藏】