锻压技术

铸旋铝合金车轮短流程制造工艺的试验研究

英文标题：Experimental study of short process manufacturing technology for spin casting aluminum alloy wheel

作者：张立娟常海平凌绍华马婧

关键词：铸旋铝合金车轮短流程工艺旋压

分类号：TG316

出版年,卷(期):页码：2014,39(5):111-115

摘要：

为了提高材料利用率、降低制作成本，对铸旋铝车轮的制造流程进行了重新设计，取消了铣平台、预机加等工序。对压铸飞边的影响效果、无飞边压铸毛坯的结构设计、旋压工艺的改进和优化、热处理工艺试验等方面进行了研究。试验结果说明：通过优化压铸模具和毛坯结构设计，取消了预机加工序，所生产毛坯不会产生对产品质量有安全隐患的飞边，旋压工序由3道次改为4道次，仍能完成毛坯旋压；同时，旋压后高温毛坯取消了冷却环节而直接进行热处理，从而实现了车轮的短流程工艺。

In order to improve the utilization rate of materials and reduce the production cost, the manufacturing process of spin casting aluminum alloy wheel was redesigned. The milling platform and pre-machining processes were cancelled. The researches were conducted on the impact effect of casting flash, structure design of casting blank without flash, improvement and optimization of spinning process, and experiment of heat treatment process. The results show that the pre-machining sequence is cancelled by the optimization of casting mold and structure design of blank. The produced blank is without fash which brings out potential safety hazard to the quality of products. The spinning process is changed from three passes to four passes, though the blank spinning is completed. At the same time，short process of wheel is gained by cancelling of cooling process and directly heat-treatment for the high-temperature blank after spinning.

基金项目：

秦皇岛市科学技术研究与发展计划项目(2012021A122)

张立娟（1979-），女，硕士，讲师

参考文献：

［1］张立娟,周宏伟,韩云,等.铸旋铝合金轮毂对旋压设备的需求分析[J].锻压技术,2010,35(4)：175-178.Zhang Lijuan, Zhou Hongwei, Han Yun, et al. Requirement analysis of spin casting aluminum wheel on spinning equipment[J].Forging ＆ Stamping Technology,2010,35(4)：175-178.
［2］孔玲,张立娟,常海平,等.铸旋铝合金轮毂旋压模具设计及压料方式研究[J].制造技术与机床, 2011,（3）:142-143.Kong Ling, Zhang Lijuan, Chang Haiping, et al. Study on Al-alloy wheel spinning die and the blank holder mode[J].Manufacturing Technology & Machine Tool, 2011,（3）:142-143.
［3］宋鸿武,李昌海,常海平,等.高强韧铝合金轮毂的轻量化铸旋新工艺[J].稀有金属,2012,36(4)：630-635.Song Hongwu，Li Changhai，Chang Haiping, et al. A new cast spinning process for light weight aluminum alloy wheels[J]. Chinese Journal of Rare Metals,2012,36(4)：630-635.
［4］张庆玲. 铝合金轮毂强力旋压数值模拟技术研究[J].农业装备与车辆工程, 2008,205(8):31-33.Zhang Qingling. Study on numerical simulation of aluminum alloy wheel spinning[J]. Agricultural Equipment & Vehicle Engineering,2008,205(8):31-33.
［5］常海平.一种铝合金轮毂铸旋成形工艺[J].锻压装备与制造技术,2012,47（4）：67-69.Chang Haiping. A spin casting forming technology of aluminum alloy wheel hub[J].Equipment & Manufacturing Technology,2012,47（4）：67-69.

服务与反馈：

【文章下载】【加入收藏】