锻压技术

基于固有应变法的板材高频感应加热热弹塑性变形研究

英文标题：Investigation on thermal elastic-plastic deformation of high frequency induction heating plate based on inherent strain method

作者：王智祥王帅张继祥徐昱刘紫阳

单位：重庆交通大学

关键词：高频感应加热固有应变热弹塑性

分类号：

出版年,卷(期):页码：2014,39(7):50-54

摘要：

为了探究造船业中的中厚板热应力成形中热弹塑性变形原理，基于高频感应加热成形与焊接加工的一些相似性，将焊接分析中的固有应变法引入到高频感应加热成形过程中的热弹塑性变形分析与计算。通过对高频感应加热过程分析，推导出感应加热过程中应变、应力和弯矩关键因素的理论计算方法，利用此计算方法分别得到了不同工艺下的弯矩和变形量。与高频感应加热成形的实验结果对比可知，理论计算结果与实验结果基本一致，验证了简化模型的合理性。

To explore the principle of medium plate thermal elastic-plastic deformation in thermal stress forming in marine industry, the method of inherent strain used in the welding analysis was introduced into the process of high frequency induction heating forming analyses and calculation of thermal elastic-plastic deformation considering that some similarity exists between high frequency induction heating and welding processing. After the analysis of high frequency induction heating process, the key factors of the induction heating process，such as strain, stress and bending moment，were calculated in theory. The bending moment and deformation under different processes were obtained respectively by using this method. Compared with the results of high frequency induction heating forming experiment, it is concluded that the theoretical calculation results are basically identical with the experimental results,which shows that the simplified model is reasonable.

基金项目：

2012年度重庆市科技计划项目：内河豪华游轮新船型与电力全回转矢量推进系统研究及应用（cstc2012gg-yyjsB70002）

王智祥（1955-），男，学士，教授

参考文献：

[1]范平,陈明和,黄永成,等.板料高频感应热应力成形技术试验研究[J].锻压技术,2008,33(4):38-42.

Fan Ping, Chen Minghe, Huang Yongcheng,et al. Experimental study of high frequency induction thermal stress forming technology of plate[J].Forging & Stamping Technology,2008,33(4):38-42.

[2]上田幸熊.焊接变形和残余应力的数值计算方法与程序[M].成都:四川大学出版社, 2007.

Ueda Yukio. Welding Deformation and Residual Stress of Numerical Calculation Method and Procedure[M]. Chengdu: Sichuan University Press, 2007.

[3]Ueda Yukio，Yuan Mingang. Theoretical determination of the sizes of standard model and effect of changes in heat input and kind of steel on inherent strain[J]. Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society,1988, 3(6):36-41.

[4]Jiangchao Wang, Sherif Rashed, Hidekazu Murakawa, et al. Numberial prediction and mitigation of out-of-plane welding distortion in ship penal structure by elastic FE analysis[J]. Marine Structure,2013,(34)：135-155.

[5]何福宝,沈亚鹏.板壳理论[M].西安：西安交通大学出版社,1993.

He Fubao, Shen Yapeng. Theory of Plates and Shells[M]. Xian:Xian Jiaotong University Press,1993.

[6]范平.高频感应弯板成形技术研究[D].南京：南京航天航空大学,2008.

Fan ping. Research on High Frequency Induction Heating Forming of Plate [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2008.

[7]Itoh Yoshiyasu,Tanaka Akira,Saitoh Kazuhiro,et al. Analysis for residual stress and deformation of coated member using inherent strain method[J]. A Hen/Transactions of the Japan Society of Mechanical Engineers,2003,69(4): 727-732.

[8]Ueda Yukio,Fukuda Keiji. New measuring method of three-dimensional residual stresses in long welded joints using inherent strains as parameters-Lz method [J]. Journal of Engineering Materials and Technology, Transactions of the ASME, 1989,111(1): 1-8.

[9]魏良武.固有应变法预测焊接变形研究及工程应用[D].上海：上海交通大学,2004.

Wei Liangwu. Investigation on Inherent Strain Method for Welding Deformation Prediction and Its Engineering Application [D].Shanghai: Shanghai Jiaotong University, 2004.

[10]黄辉,赵耀,袁华.平板焊接变形预测固有应变方法的研究[A].第五届中国CAE工程分析技术年会论文集[C].兰州，2009.

Huang Hui, Zhao Yao, Yuan Hua. Plate welding distortion prediction investigation on inherent strain method[A]. The Conference Prceeding of the 5th China CAE Engineering Analysis Technology[C].Lanzhou, 2009.

[11]罗宇,邓德安,江晓玲,等.热变形的固有应变预测法及实例[J].焊接学报，2006,27(5):17-20.

Luo Yu, Deng Dean, Jiang Xiaoling, et al. A method to predict residual distortion based on inherent strain and its application to heating processes[J].Transactions of the China Welding Institution,2006,27(5):17-20.

[12]罗宇,鲁华益,朱枳锋.固有应变的概念及其在船舶建造中的应用[J].造船技术,2005,(2):35-39.

Luo Yu, Lu Huayi, Zhu Zhifeng . The method of inherent strain and its application in ship construction [J]. Marine Technology,2005,(2):35-39.

服务与反馈：

【文章下载】【加入收藏】