锻压技术

阳极接触片多工位级进模设计

英文标题：Design of multi-position progressive die for anode contactor

作者：于仁萍宋雪梅宫晓峰

单位：烟台职业学院

分类号：TG382

出版年,卷(期):页码：2014,39(9):102-106

摘要：

分析了阳极接触片零件的冲压工艺性，进行排样设计和多工位级进模具结构设计。论述了定位装置、弹压卸料装置、凸凹模结构和自动送料装置的结构设计。选用较高精度等级的滑动导向对角导柱模架；采用有沿边和搭边的排样方式，采用侧刃定距、自动送料和弹压卸料装置以消除多工位级进模的定位误差；凸模和凹模采用镶拼结构以保证工件的形状尺寸要求；成形工序之前先冲制工艺孔可以防止工件弯裂。实践证明，模具结构紧凑合理，便于加工维护，能保证零件的成形质量和生产效率的要求。

The stamping process of the anode contactor was analyzed. The layout and the multi-progressive die were designed. The structure designs of the location device, spring stripping, forming die and automated feeding device were detailed. Sliding guide diagonal pillar die sets with high accuracy grade were chosen; the layouts of both with and without scraps were applied; devices with the side blade, auto-feeding and spring stripper were designed in order to eliminate positional errors of the multi-position progressive feeding accuracy. The mosaic structure of the punch and the die was designed to guarantee the qualified shape and size of the part. The technological holes were stamped before forming so as to avoid bending crack. Experiment shows that the multi-progressive die has compact and reasonable structure, which is easy to manufacture and maintain. It can meet requirements of quality part and production efficiency.

基金项目：

山东省高等学校科技计划资助项目（JI3LB59）

于仁萍（1979-），女，硕士，讲师

参考文献：

［1］宫晓峰，于仁萍，佟玉斌.消声器法兰冲压工艺及翻孔翻边复合模设计[J].热加工工艺，2013，42(15)：134-135.Gong X F,Yu R P,Tong Y B.Stamping process and edge-hole flanging compound die design of muffler flange[J].Hot Working Technology, 2013,42(15):134-135.
［2］张正修.冲模结构设计方法、要点及实例[M].北京：机械工业出版社，2007.Zhang Z X. Method, Points and Examples of Die Design [M].Beijing: China Machine Press,2007.
［3］陈志超，夏琴香，郭新年，等.某高强钢板汽车结构件多工位级进模设计[J].锻压技术，2012，37(2)：47-50.Chen Z C,Xia Q X,Guo X N, et al. Design of multi-position progressive die of automotive structural part made by high-strength steel[J]. Forging & Stamping Technology, 2012,37(2):47-50.
［4］何敏红，王树勋.悬挂件多工位级进模的设计[J].锻压技术，2012，37(5)：115-117.He M H,Wang S X. Design of multi-position progressive die for suspension component[J].Forging & Stamping Technology, 2012,37(5):115-117.
［5］齐新华，李恒灿，李勇，等.安装座的多工位级进模设计[J].机械设计与制造，2011，40(12)：247-248.Qi X H, Li H C, Li Y, et al. Design of multistage progressive die for soleplate component part[J]. Machinery Design & Manufacture, 2011, 40(12):247-248.
［6］佟玉斌，宫晓峰，于仁萍.复杂支架零件成形模设计[J].模具工业，2008，34(11)：24-27.Tong Y B, Gong X F, Yu R P. Development of forming die for complicated bracket[J]. Die & Mould Industry, 2008, 34(11):24-27.
［7］王春香.弹簧卡多工位级进模设计[J].锻压技术，2010，35(3)：124-127.Wang C X. Design of multi-station progressive die for spring clinch[J].Forging & Stamping Technology, 2010,35(3):124-127.
［8］向小汉.后背门外板加强板多工位级进模设计[J].锻压技术，2013，38(2)：101-105.Xiang X H. Desing of multi-position progressive die for reinforcement-GATE OTR PNL[J]. Forging & Stamping Technology, 2013,38(2):101-105.
［9］段来根.多工位级进模与冲压自动化[M].北京：机械工业出版社，2012.

Duan L G. Multi-position Progressive Die and Automatic Press [M].Beijing: China Machine Press,2012.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】