锻压技术

基于UG的覆盖件压料面优化设计方法研究

英文标题：UG-based optimized design for blank holder of automobile panel

作者：孙文鹏王义林

单位：华中科技大学

关键词：覆盖件压料面形面优化

分类号：TP391.72

出版年,卷(期):页码：2014,39(9):150-154

摘要：

对覆盖件压料面的设计过程进行分析和研究，从其工艺要求出发，基于最小二乘法的思想，提出了使用评价函数对压料面的质量进行定量评价的方式，并给出了求解评价函数最优解的算法，实现了规则类型压料面设计的定量优化。在基于UG/NX平台的PDCAPP系统中验证了算法的可行性，并在PDCAPP系统的压料面参数化设计模块基础上完成了以评价函数为标准计算规则压料面最佳参数的程序模块。以圆柱形压料面为例，给出了用模拟退火算法求解最佳轴向和用梯度法求解最佳拟合截面线的相关公式和算法以及完整优化程序流程。

The design process of blank holder of automobile panel was analyzed and studied. Starting from the process requirements and based on the idea of the least squares method, the quantitative evaluation method for quality of blank holder was proposed by using evaluation function. And the practical algorithm for the optimal solution of evaluation function was given, then a quantitative optimization for regular type of blank holder was achieved.The feasibility of algorithm was verified in system PDCAPP based on UG/NX.On the basis of system PDCAPP, the program module of calculating the optimum parameters for evaluation function of regular type of blank holder was completed.Taking a cylindrical blank holder for an example, the relevant formulas and algorithms and a complete optimization program flow were given, in which annealing algorithm was used for calculating the optimal axial and gradient method was used for calculating the best fit section.

基金项目：

孙文鹏（1989-），男，硕士研究生

参考文献：

［1］崔令江. 汽车覆盖件冲压成形技术[M]. 北京: 机械工业出版社, 2003.Cui L J. Technology of Automobile Panel Stamping Forming [M]. Beijing: China Machine Press, 2003.
［2］王耕耘, 王义林, 吴勇国, 等. 覆盖件模具CAD系统的研究[J]. 锻压技术, 1997, 22(4): 52-56.Wang G Y, Wang Y L, Wu Y G, et al.Study on CAD system of panel die[J]. Forging & Stamping Technology, 1997，22(4):52-56.
［3］汪双柱, 王义林, 周益秋, 等. 汽车覆盖件成双冲压模具型面的参数化设计[J].模具工业,2011,37(1): 21-22.Wang S Z, Wang Y L, Zhou Y Q, et al. Parametric design of die face in double stamping of automobile panel[J].Die & Mould Industry, 2011,37(1):21-22.

［4］汪宏亮, 王义林. 基于UG的汽车覆盖件冲压CAPP/CAE集成系统的研究[J]. 锻压装备与制造技术,2006,41(6):95-96.Wang H L, Wang Y L. Research on UG- based stamping CAPP /CAE integration system for automotive panels China metalforming[J]. Equipment & Manufacturing Technology,2006,41(6):95-96.
［5］王玉国,卫原平,沈启埃,等. 覆盖件拉深模工艺补充部分和压料面设计[J]. 上海交通大学学报，1999,33(2):184-186.Wang Y G, Wei Y P, Shen Q A, et al. Addendum and binder surface design for automotive panel drawing die[J]. Journal of Shanghai Jiaotong University,1999, 33(2):184-186.
［6］王晓梅.覆盖件模具型面设计系统研究[D].武汉：华中科技大学，2009.Wang X M. The Research on the Panel Die Surface Design System[D]. Wuhan: Huazhong University of Science and Technology, 2009.
［7］王新洲.非线性模型参数估计理论与应用[M].武汉:武汉大学出版社,2002.Wang X Z. Theory and Application of Parameter Estimation of Nonlinear Model[M]. Wuhan:Wuhan University Press, 2002.
［8］孙玉.覆盖件型面设计方法的研究[J].锻压装备与制造技术,2007,42(1):83-86.Sun Y. Research on die-face design for automotive panels[J]. Equipment & Manufacturing Technology, 2007,42(1):83-86.

服务与反馈：

【文章下载】【加入收藏】