锻压技术

仪表视窗多工位连续式复合模设计

英文标题：Design on multi-position progressive compound die for meter windows

作者：于仁萍宋雪梅宫晓峰

单位：烟台职业学院

分类号：

出版年,卷(期):页码：2014,39(10):108-112

摘要：

以航空仪表视窗零件为例，分析了其冲压工艺性，进行了排样设计及其连续式复合模具总体结构设计，详述了定位装置、卸料装置和工作零件的结构设计。选用了较高精度等级的滑动导向四角导柱钢模板模架，其运作平稳、导向精度高；采用了有沿边、有搭边的排样方式，提高了制件精度；使用双侧刃定距、双侧导料板导向的定位方式，提高了定位精度；采用弹压卸件器和顶件器能够有效防止毛坯偏移，同时提高定位精度，减少回弹；在切舌弯曲和内外缘翻边工位进行了工序复合，减少了定位误差，缩小了模具的整体尺寸，并降低了生产成本；增设空位保证凹模的强度和凸模及其他零件的安装空间。实际生产证明，设计的模具结构加工制造和维护修配简单方便，满足生产效率的要求，能保证产品质量。

Taking the aeronautical meter windows as example，the stamping process of the meter windows was analyzed, the layout and overall structure of multi-position progressive compound die were designed, and the structure design of the location device, strippers and working parts were detailed. Sliding guide four-pillar die sets with higher accuracy grade were selected due to stable operation and high guidance precision. The layout with edgewise and scraps was designed to improve the precision of that part. The location modes of feeding distance determined by double side blades and feeding direction determined by bilateral guide plates were adopted to improve the location precision. The blank offsetting was prevented by using spring strippers and ejectors to improve the location precision and reduce the spring-back at the same time. The location error，overall dimension of die and production costs were reduced by combining cutting tongue-bedding with flanging the inner and outer edges. Some empty stations were added to ensure the strength of die and installing space of the punches and other parts. The actual production shows that the die manufacturing and maintaining are convenient, which meets the required productivity and guarantees the quality.

基金项目：

山东省高等学校科技计划项目（J13LB59）

于仁萍（1979-），女，硕士，讲师

参考文献：

[1]张正修.冲模结构设计方法、要点及实例[M].北京：机械工业出版社，2007.

Zhang Z X. Method, Points and Examples of Die Design [M].Beijing: China Machine Press,2007.

[2]于文强，叶成萌，张建龙.录音机开门推板级进模设计[J].锻压技术，2012，37(8)：100-102.

Yu W Q,Ye C M,Zhang J L.Progressive die design of recorder open-door push plank[J]. Forging & Stamping Technology, 2012,37(8):100-102.

[3]齐新华，李恒灿，李勇，等.安装座的多工位级进模设计[J].机械设计与制造，2011，40(12)：247-248.

Qi X H,Li H C ,Li Y, et al.Design of multistage progressive die for soleplate component part[J]. Machinery Design & Manufacture, 2011,40(12):247-248.

[4]何敏红，王树勋.悬挂件多工位级进模的设计[J].锻压技术，2012，37(5)：115-117.

He M H,Wang S X.Design of multi-position progressive die for suspension component[J].Forging & Stamping Technology, 2012,37(5):115-117.

[5]陈志超，夏琴香，郭新年，等.某高强钢板汽车结构件多工位级进模设计[J].锻压技术，2012，37(2)：47-50.

Chen Z C,Xia Q X,Guo X N, et al. Design of multi-position progressive die of automotive structural part made by high-strength steel[J]. Forging & Stamping Technology, 2012,37(2):47-50.

[6]佟玉斌，宫晓峰，于仁萍.复杂支架零件成形模设计[J].模具工业，2008，34(11)：24-27.

Tong Y B,Gong X F,Yu R P.Development of forming die for complicated bracket[J]. Die & Mould Industry, 2008, 34(11):24-27.

[7]钟江静，梁士红.接触簧片冲压工艺及模具结构设计[J].锻压技术，2013，38(4)：106-110.

Zhong J J,Liang S H. Design of stamping process and die structure for contact spring[J].Forging & Stamping Technology, 2013,38(4):106-110.

[8]向小汉.后背门外板加强板多工位级进模设计[J].锻压技术，2013，38(2)：101-105.

Xiang X H.Desing of multi-position progressive die for reinforcement-GATE OTR PNL[J].Forging & Stamping Technology, 2013,38(2):101-105.

[9]段来根.多工位级进模与冲压自动化[M].北京：机械工业出版社，2012.

Duan L G.Multi-position Progressive Die and Automatic Press [M].Beijing: China Machine Press,2012.

服务与反馈：

【文章下载】【加入收藏】