锻压技术

盒形件变压边力拉深成形研究

英文标题：Research on variable blank holder force deep drawing for rectangular box parts

作者：陈炜周宏超徐雪来袁豹王祥欧阳康

单位：江苏大学

分类号：THl37.52

出版年,卷(期):页码：2014,39(11):20-23

摘要：

盒形件具有非回转对称形状特征，其成形性能受多种因素的影响。其中压边力的影响尤其明显，且易于控制和调节。采用数值模拟研究了恒压边力和变压边力（随行程变化）下盒形件的拉深成形性能，并得出了相应的结果。并将加载变压边力的实际拉深实验结果与数值模拟结果进行对比。研究表明，施加递增型和∧型变压边力能够有效地控制金属的流动，提高板材的成形性能；实际拉深实验壁厚变化趋势与数值模拟一致，误差较小，验证了数值模拟的可靠性。

The formability of rectangular box parts with non-rotationally symmetric characteristic is affected by many factors. The effect of blank holder force is particularly evident, and it is easy to control and adjust. The deep drawing formability of rectangular box parts was studied by numerical simulation under conditions of variable blank holder force (VBHF) and constant blank holder force respectively, and the corresponding numerical simulation results were obtained. The actual deep drawing experiments with load VBHF were compared with the results of numerical simulation. Studies show that loading the incremental type and ∧ type of VBHF can control the flow of metal material effectively, and the formability of sheet metal is improved. The changing trend of wall thickness in the experiment is the same as that of numerical simulation. Due to a small error, the reliability of numerical simulation is verified.

基金项目：

2012年江苏大学工业中心大学创新实践基金资助项目资助

陈炜(1965-)，男，博士，博士生导师，教授周宏超(1987-)，男，硕士研究生

参考文献：

［1］张晓斌，孙宁，樊红梅，等.板料成形压边力控制技术研究现状及发展趋势[J].锻压技术，2007，32(6)：6-12.Zhang X B，Sun N，Fan H M，et al. Recent research and development trend of blank holder force control technology for sheet metal forming[J].Forging & Stamping Technology，2007，32(6)：6-12.
［2］徐刚，李建军，付秀娟.成形速度及载荷对高强钢板回弹影响的研究[J].锻压技术，2012，37(2)：15-20.Xu G，Li J J，Fu X J.Research on influence of forming speed and load on spring-back for high strength steel sheets[J].Forging & Stamping Technology，2012，37(2)：15-20.
［3］孙成智，陈关龙，林忠钦，等.利用变压边力控制技术改善盒形件成形性能[J].上海交通大学学报，2003，37(12)，1183-1186.Sun C Z，Chen G L，Lin Z Q，et al.Impovement of the formability of box deep drawing using variable blank-holder forces[J].Journal of Shanghai Jiaotong University，2003，37(12)，1183-1186.
［4］王元勋，王书恒，沈为，等.矩形盒拉深时变压边力的数值模拟[J].中国机械工程，2007，18(10)：1226-1229.Wang Y X，Wang S H，Shen W，et al.Numerical simulation of variable blank-holder force in box deep drawing process[J].China Mechanical Engineering，2007，18(10)：1226-1229.
［5］Benny Endelt，Sren Tommerup，Joachim Danckert.A novel feedback control system-Controlling the material flow in deep drawing using distributed blank-holder force[J].Journal of Materials Processing Technology, 2013, 123: 36-50.
［6］李钦生，陈炜，黄振荣，等.汽车顶盖拉延成形研究及工艺参数优化[J] .锻压技术，2011，36(5)：19-22.Li Q S，Chen W，Huang Z R，et al.Research on forming process of automobile cover and technological parameter optimization[J].Forging & Stamping Technology，2011，36(5)：19-22.
［7］吕盾，陈炜，姜银方，等.变压边力控制技术的研究现状和发展趋势[J].模具工业，2006，32(4)：37-41.Lv D，Chen W，Jiang Y F，et al.Status quo of research and developing trend of control technology of variable blank_holder force[J].Die & Mould Manufacture，2006，32(4)：37-41.
［8］陈龙，王明伟，李姝，等.汽车加强板冲压成形数值模拟及试验研究[J].锻压技术，2012，37(6)：182-186.Chen L，Wang M W，Li S，et al.Forming numerical simulation and experimental for automotive enforcement panel[J].Forging & Stamping Technology，2012，37(6)：182-186.
［9］Lin Z Q，Wang W R，Chen G L. A new strategy to optimize variable blank holder force towards improving the forming limits of aluminum sheet metal forming[J].Journal of Materials Processing Technology，2007，183：339-346.
［10］孙成智，陈关龙，李淑惠，等.变压边力对矩形件成形性能的影响[J].塑性工程学报，2003，10(4)：6-9.Sun C Z，Chen G L，Li S H，et al.Effect of variable blank holder force on the formability of rectangular box[J].Journal of Plasticity Engineering，2003，10(4)：6-9.
［11］梁炳文，陈孝戴，王志恒，等.钣金成形性能[M].北京：机械工业出版社，1999.Liang B W，Chen X D，Wang Z H，et al.The Formability of Sheet Metal[M].Beijing：China Machine Press，1999.

服务与反馈：

【文章下载】【加入收藏】