锻压技术

铝板在车身覆盖件冲压生产中的关键技术

英文标题：Key technology of car body cover of aluminum sheet in the stamping process

作者：张毅连昌伟

分类号：

出版年,卷(期):页码：2015,40(1):48-51

摘要：

随着汽车轻量化的需求，铝合金材料被越来越多的应用到汽车制造领域。介绍了汽车行业常用2000系、5000系和6000系等铝合金材料，并简述了铝材料开发、在车身零件上的应用趋势，以及对于汽车轻量化的意义。从现场实际出发，通过对铝板材料的剪切、配送、存储、分张、冲压成形以及铝板零件的检修的各环节的现场分析，总结了四个方面的控制要点，即材料保存、板料拆垛、模具冲制、质检返修，并提出了预防材料发霉、解决铝板分张的措施、控制铝板成形质量以及铝板零件检验和返修要点等相应的解决方案。

With the demand for automotive lightweight, more and more aluminum alloy material is applied in automotive manufacturing. The 2000 series, 5000 series and 6000 series aluminum alloys commonly used in the automotive industry were introduced, and their development, application trends in body parts, as well as significance for lightweight vehicles were described briefly. Based on the field practice, four control points were summarized including material storage, sheet de-stacking, die punching, quality inspection and repair control through analysis of cutting, distribution, storage, separation, stamping of aluminum materials, and overhaul of aluminum stamping parts and all other aspects of production. The corresponding solutions were proposed including preventing mildew, solving measure of aluminum sheet separation, controlling forming quality of aluminum parts, putting forward key points of inspection and repair of stamping part.

基金项目：

张毅（1980-），男，学士，工程师

参考文献：

［1］马鸣图，易红亮，路洪洲,等. 论汽车轻量化[J].中国工程科学，2009，11（9）:22-27.Ma M T, Yi H L, Lu H Z, et al. On the lightweighting of automobile[J].Engineering Sciences, 2009，11(9).：22-27.

［2］马鸣图，马露霞. 铝合金在汽车轻量化中的应用及其前瞻技术[J].新材料产业,2008,(9)：43-50.Ma M T, Ma L X. Application of aluminum sheet in automobile light-weighting and its prospect technology[J]. Advanced Materials Industry, 2008,(9):43-50.

［3］刘宏. Al-Mg-Si-Cu-Mn汽车车身用铝合金板材的研究[D].沈阳：东北大学，2005.Liu H. Development of a Novel AI-Mg-Si-Cu-Mn Alloy Automotive Body Sheet Material[D].Shenyang:Northeast University,2005.

［4］陈超，桂枫，陈明安. 铝合金板材弯曲成形性能[J]. 锻压技术, 2013, 38 (1) : 25-29.Chen C，Gui F，Chen M A. Bending formability of aluminum alloy sheet[J]. Forging & Stamping Technology, 2013, 38 (1) : 25-29.

［5］任宾彦.汽车轻量化和铝合金应用[R].重庆：汽车交通用铝国际研讨会,2005.Ren B Y. Automobile light-weighting and application of aluminum alloy[R].Chongqing：International Symposia of Aluminum for Automobile and Traffic，2005.

［6］吴阳，郑英，邓运来，等. 7475铝合金壁板蠕变成形筋条失稳及数值模拟[J]. 锻压技术, 2013, 38 (6): 56-61.Wu Y，Zheng Y，Deng Y L，et al. Forming stability and numerical simulation of creep forming for 7475 aluminum alloy integrally stiffened panel [J]. Forging & Stamping Technology, 2013, 38 (6): 56-61.

［7］路洪洲,马鸣图,游江海, 等. 铝合金汽车覆盖件的生产和相关技术研发进展[J]. 世界有色金属，2008,（5）:66-70.Lu H Z, Ma Mi T, You J H, et al. Application of aluminum alloy in auto panel and research development of related technology[J]. World Nonferrous Metals，2008,（5）:66-70.

［8］李毅. 覆盖件用6000系铝合金粘性介质压力成形性研究[D]. 哈尔滨：哈尔滨工业大学，2009.Li Y. Research on Formability of 6000 Series Aluminum Alloy for Panel Under Viscous Pressure Forming[D]. Harbin: Harbin Institute of Technology, 2009.

［9］戚文军，王顺成，陈学敏，等.Al-5Ti-1B合金的有效形核相与晶粒细化机制[J] 稀有金属, 2013, 37(2): 179-185.Qi W J, Wang S C, Chen X M,et al. Effective nucleation phase and grain refinement mechanism of Al-5Ti-1B master alloy[J].Chinese Journal of Rare Metals, 2013，37(2): 179-185.

服务与反馈：

【文章下载】【加入收藏】