锻压技术

关节轴承二次挤压过程的数值模拟及工艺改进

英文标题：Numerical simulation and process improvement of re-extrusion process

作者：吴连平杨晓翔

单位：福州大学

分类号：

出版年,卷(期):页码：2015,40(1):61-65

摘要：

针对大型关节轴承实际挤压成形后出现内外圈间隙分布不均匀的缺陷，采用Abaqus软件对GEG60大型关节轴承的二次挤压成形过程进行数值模拟，分析了轴承外圈回弹量分布情况及其成形机理。根据初始设计方案的不足，提出减小模具收口半径及模具半径和在轴承外圈的腰部及两端增加突起两种改进方案。研究结果表明，两种改进方案使外圈的回弹量更加均匀，不仅有效地改善了初始模具设计中内外圈间隙分布不均的问题，而且明显地提高了轴承内外圈金属流动速度分布的均匀性和内外圈之间的接触应力的均匀性。

For the non-uniform clearance between the outer ring and the inner ring of large joint bearings after extrusion process, the re-extrusion and assembly process of GEG60 bearing was simulated by Abaqus software, and the distribution of springback and deformation mechanism of the outer ring were investigated. According to the shortage of initial design scheme, two improvement schemes (Reduce convergent radius and die radius and increase protuberance at the waist and both ends of the outer ring) were proposed to solve the problem. The results show that the distribution of the springback of the outer ring is more uniform by implementing the improved plans. Not only the non-uniform of clearance between the outer and the inner rings for initial die design is improved, but also the uniformity of metal flow velocity distribution and contact stress of the inner and the outer rings for bearings are improved considerably.

基金项目：

福建省科技重大专项：高端自润滑关节轴承研发及产业化（2012HZ0006-3）

吴连平（1988-），女，硕士研究生

参考文献：

［1］Byung Chul Kim，Dong Chang Park，Hak Sung Kim，et al. Development of composite spherical bearing [J]. Composite Structures,2006,75(1):231-240.

［2］杨程，赵升吨，安苏娟，等.一种轴承内外套圈毛坯复合温挤压成形工艺及模具[J].锻压技术，2012,37(1):10-13.Yang C，Zhao S D, An S J, et al. Combined warm extrusion process and its die of bearing inner and outer rings[J].Forging & Stamping Technology, 2012,37(1):10-13.

［3］陈继刚，杨育林，夏振伟，等.整体型外圈关节轴承成形技术现状及发展趋势[J].轴承，2013,（9）：58-62.Chen J G,Yang Y L,Xia Z W,et al.Current status and development trends of forming technology for spherical plain bearing with one piece outer ring[J].Bearing，2013,（9）：58-62.

［4］Yulin Yang, Shijun Huang. Study on new forming process for spherical plain bearing and optimum of the necking force[J]. International Conference on Information Engineering，2010, 229: 216-219.

［5］Alex Orsolini,Julian D Booker. Modelling capabilities required for the double nosing process in the assembly of spherical plain bearings [J].Journal of Engineering Manufacture, 2012，226(5): 930-940.

［6］Johnpaul Woodhead,Julian Booker.Modelling of nosing for assembly of aerospace bearings[J].Experimental and Applied Mechanics,2013,38:327-338.

［7］Xiumei Wang,Shaowei Lv. Numerical investigation on press forming of self-lubricating spherical plain bearings[J]. Int. J. Materials and Product Technology, 2013, 47:46-62.

［8］陈浩,赵国群,张存生,等. 薄壁空心铝型材挤压过程数值模拟及模具优化[J]. 机械工程学报,2010，46(26):35-39.Chen H,Zhao G Q,Zhang C S,et al. Numerical simulation of extrusion process and die structure optimization for a hollow aluminum profile with thin wall[J]. Chinese Journal of Mechanical Engineering,2010，46(26):35-39.

服务与反馈：

【文章下载】【加入收藏】