锻压技术

左右车门外板支撑板共模的多工位模具设计

英文标题：Multi-position die design of support plates for left and

作者：郑薇刘春雨吕俊超何鹏申

分类号：

出版年,卷(期):页码：2015,40(1):99-103

摘要：

介绍了某汽车左右车门外板支撑板的工艺及模具结构设计，通过优化工艺及模具结构，将左右车门外板支撑板同模生产，即在同一副模具中完成拉延、修边冲孔、剖切等冲压工序。重点讲述了左右车门外板支撑板共模拉延的工艺及其多工位模具的结构及工作原理。生产实际证明，该模具有效地降低了模具开发成本；将原来的六套模具整合成一套模具，降低了机床的冲次费用，减少了冲压操作工人的数量，提高生产节拍和生产效率，节省了冲压车间模具的存放空间；材料利用率较预估的单件拉延提升了5.66%。将此技术应用于同类产品会大大降低整车白车身的开发费用。

The technology and die structure of support plates for left and right panels of auto door were introduced. By optimizing the technology and die structure, the support plates of left and right panels of the car doors were produced in one die including drawing, trimming, punching and cutting process. The optimized technology, the structure and principle of multi-position die were described. Production practice proves that the cost of die development is effectively reduced；the original six sets of die are integrated into a set of die, which reduces the cost of punching times and the number of stamping operation workers, improves the production efficiency, and saves the storage space of stamping workshop, increases the material utilization by 5.66% than that of the forecast sheet drawing. Therefore, the cost of development on the vehicle will reduced considerably.

基金项目：

安徽省科技厅基金资助项目（11010201020）

郑薇（1982-），女，学士，工程师

参考文献：

［1］郑金桥，黄勇，王义林，等. 汽车覆盖件冲压工艺设计现状及发展趋势[J］.塑性工程学报，2003，10(6)：9-14.Zheng J Q, Huang Y, Wang Y L, et al. Present situation and prospects of stamping process planning for automobile panels[J］. Journal of Plasticity Engineering, 2003，10(6)：9-14.

［2］史茂华.冲压模具设计过程中的关键要素[J］.汽车工艺与材料，2011，（3）：44-58.Shi M H. Critical factors in the process of stamping tool design [J］.Automobile Technology & Material, 2011，(3)：44-58.

［3］王孝培.实用冲压技术手册[M］. 北京：机械工业出版社，2001.Wang X P. Practical Handbook of Stamping Technology [M］.Beijing: China Machine Press, 2001.

［4］王新华.冲模设计与制造实用计算手册[M］.北京：机械工业出版社，2011.Wang X H. Handbook of Computational Design and Manufacture of Practical Die[M］. Beijing: China Machine Press, 2011.

［5］现代模具技术编委会．汽车覆盖件模具设计与制造[M］．北京：国防工业出版社，1998.Modern Mold & Die Technology Editorial Board. The Dies Designing and Manufacturing of Auto Body Metal Sheet Parts[M］.Beijing: National Defense Industry Press,1998.

［6］崔令江.汽车覆盖件冲压成形技术[M］.北京：机械工业出版社，2003.Cui L J. Technology of Automobile Panel Stamping Forming [M］. Beijing: China Machine Press, 2003.

［7］吴裕农，杨亘，袁根华.冰箱上、下梁冲压工艺改进及多工位传递模设计[J］.锻压技术,2012,37（6）: 91-95.Wu Y N，Yang G，Yuan G H. Process improvement of stamping for refrigerator beam and design of multi-position transferring die[J］.Forging & Stamping Technology, 2012,37（6）: 91-95.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】