锻压技术

汽车覆盖件模具软干涉检查方法研究

英文标题：Study on soft interference checking method for automobile panel dies

作者：朱亮章志兵柳玉起柯俊逸

单位：华中科技大学

分类号：TG385.2；TP391.72

出版年,卷(期):页码：2015,40(5):38-41

摘要：

提出了一种软干涉检查方法，该方法利用碰撞检测中常用的空间分割思想，将实体包围盒空间划分成若干体积相同的空间格，将实体表面剖分成三角面片网格模型，并将三角面片单元映射到各个空间格中，最终只需对相同或相邻空间格内的三角面片对进行软干涉检查。基于该方法在Unigraphics NX平台上开发了一套软干涉检查系统，该系统求解速度快、精度高，可用于快速分析汽车覆盖件模具软干涉问题，提高汽车覆盖件模具的设计效率以及减少设计错误。最后通过实例研究分析了三角面片尺寸与空间格尺寸对计算效率的影响。

A kind of soft interference checking method was proposed. The method applies the spatial subdivision that is commonly used in collision detection. Global bounding box of objects was divided into several spatial grids with the same volume, and the surfaces of objects were discretized into triangular grid model that mapped to spatial grids. Finally, soft interference checking was realized on triangular facet of the same or the adjacent spatial grid. A soft interference checking system was developed based on the platform of Unigraphics NX with high calculation speed and precision. It can be used to check soft interference on automobile panel dies rapidly and can help to improve the efficiency and reduce errors in the design of automobile panel dies. In the end, the influence of the size of triangular facet and spatial grid on the calculation efficiency was analyzed through a case study.

基金项目：

国家自然科学基金资助项目（51275184）

朱亮（1989-），男，硕士研究生章志兵（1978-），男，博士，讲师

参考文献：

［1］陈蔚. 基于NX的汽车覆盖件模具静态干涉检查研究与开发[D]. 武汉:华中科技大学, 2013.Chen W. The Research and Development of NX based Auto Panels Mold Static Interference Checking [D]. Wuhan: Huazhong University of Science and Technology, 2013.
［2］周瑾喻, 王华昌, 李建军. 基于UG的注射模干涉检查功能开发[J]. 模具工业, 2011, 37(2): 6-10.Zhou J Y, Wang H C, Li J J. UG -based development of interference checking module for injection mould[J]. Die & Mould Industry, 2011, 37(2):6-10.
［3］Ganter M A, Isarankura B P. Dynamic collision detection using space partitioning [J]. Journal of Mechanical Design, Transactions of the ASME, 1993, 115(1): 150-155.
［4］Moore M, Wilhelms J. Collision detection and response for computer animation [J]. Computer Graphics, 1988, 22(4):289-298.
［5］王志强, 洪嘉振, 杨辉. 碰撞检测问题研究综述[J]. 软件学报, 1999, 10(5): 98-104.Wang Z Q, Hong J Z, Yang H. A survey of collision detection problem [J]. Journal of Software, 1999, 10(5): 98-104.
［6］雷蓉. 虚拟动态装配及碰撞检查系统的研究开发[D]. 西安:西安理工大学, 2007.Lei R. Development of the Virtual Dynamic Assembling and Interference Inspecting System [D]. Xian: Xi'an University of Technology, 2007.
［7］谭指, 郭连水, 王昱力. 基于包围盒细分的碰撞干涉检查算法研究[J]. 成组技术与生产现代化, 2012, 29(3): 26-30.Tan Z, Guo L S, Wang Y L. Collision detection algorithm research based on bounding box [J]. Group Technology & Production Modernization, 2012, 29(3): 26-30.
［8］张忠祥, 王士同. 三角形对的快速相交测试[J]. 计算机工程与设计, 2010, 31(4): 869-871.Zhang Z X, Wang S T. Fast intersection test for triangle to triangle [J]. Computer Engineering and Design, 2010, 31(4): 869-871.
［9］刘清华, 李帅, 刘云华. 协同环境中基于轻量化的3D异构CAD模型干涉检查[J]. 中国机械工程, 2013, 24(1): 56-60.Liu Q H, Li S, Liu Y H. Collaborative supported 3D heterogeneous CAD model interference checking based on lightweight model [J]. China Mechanical Engineering, 2013, 24(1): 56-60.
［10］Teschner M, Heidelberger B, Müller M, et al. Optimized spatial hashing for collision detection of deformable objects[A]. Thomas Ertl. Proceedings of the Vision, Modeling, and Visualization Conference 2003[C]. München, Germany: Aka GmbH, 2003.

服务与反馈：

【文章下载】【加入收藏】