锻压技术

国家标准《GB/T 26637—2011镁合金锻件》实施情况及问题分析

英文标题：Implementation and problem analysis for the national standard of 《GB/T 26637—2011 Magnesium-alloy forgings》

作者：魏巍张华陈祖祥陈文敬周林金红

关键词：镁合金锻件标准实施情况

分类号：TG316

出版年,卷(期):页码：2015,40(6):171-173

摘要：

国家标准《GB/T 26637—2011镁合金锻件》是对美国标准ASTM B91—2007的修改采用，该标准自发布实施以来受到广大生产企业的广泛关注。本文介绍了该标准的制定背景、主要技术内容以及实施情况，通过分析镁合金锻造的局限性及其对企业生产造成的影响，说明该标准已经不适应现实生产需求，而且该标准所采用的美国标准ASTM B91—2007已经于2012年修订，因此提出需要对该标准进行修订和完善，提升标准的技术水平，以满足行业发展的需求。

The national standard of 《GB/T 26637—2011 Magnesium-alloy forgings》was formulated on the basis of modifying the American standard of ASTM B91—2007, since the standard was carried out, it received extensive attention of the relevant enterprises. The formulation background, main technical contents and implementation were introduced. Through the analysis of the limitations of magnesium alloy forging and the effects on the enterprise production, it is found that the standard can not meet the needs of practical production. The American standard of ASTM B91—2007 was revised in 2012. So it is need to revise and improve the standards to promote the technology level of the standard and meet the demand of the development of the industry.

基金项目：

国家标准化管理委员会国家标准制修订计划项目（20090113-T-469）

魏巍（1981-），女，硕士，工程师

参考文献：

［1］刘政军, 苏允海, 刘铎,等. 镁合金及其成型技术综述[J]. 沈阳工业大学学报, 2006, 28(1): 14-20.Liu Z J, Su Y H, Liu D,et al. Review of magnesium alloys and their forming technologies[J]. Journal of Shenyang University of Technology, 2006, 28(1): 14-20.
［2］SAE AMS 4362F—2007, Forgings, magnesium alloy 5.5Zn-0.45Zn(ZK60A-T5) precipitation heat treated[S].
［3］ASTM B91—2007, Standard specification for magnesium-alloy forgings[S].
［4］高建良，章桢彦，勒丽，等. 镁合金锻造研究综述[J]. 热加工工艺，2012，41（15）：104-108.Gao J L, Zhang Z Y, Jin L, et al. Review on forging forming technology of magnesium alloy[J]. Hot Working Technology, 2012，41（15）：104-108.
［5］吴立鸿，张春香，关绍康. 镁合金锻造成形技术研究进展[J]. 热加工工艺，2009，38（5）：80-83.Wu L H, Zhang C X, Guan S K. Research and development on forging forming technology of magnesium alloy[J]. Hot Working Technology, 2009，38（5）：80-83.
［6］ASTM B954, Test method for analysis of magnesium and magnesium alloys by atomic emission spectrometry[S].
［7］ASTM E35, Test methods for chemical analysis of magnesium and magnesium alloys [S].
［8］ASTM B953, Practice for sampling magnesium and magnesium alloys for spectrochemical analysis[S].
［9］AMS-M-3171, Magnesium alloy, processes for pretreatment and prevention of corrosion on[S].
［10］MIL-M-3171, Magnesium alloy, processes for pretreatment and prevention of corrosion on[S].
［11］ASTM B91—2012,Standard specification for magnesium-alloy forgings[S].

服务与反馈：

【文章下载】【加入收藏】