锻压技术

考虑热影响的6300 kN多向液态模锻液压机机身结构变形分析

英文标题：Structural deformation analysis of 6300 kN multi-directional liquid die forging hydraulic press frame considering the effect of heat

作者：宋双双李俊源

单位：浙江工业大学

关键词：热应力耦合分析 ANSYS Workbench 液态模锻液压机机架

分类号：

出版年,卷(期):页码：2015,40(7):98-102

摘要：

液态模锻模具在生产过程中具有一定的温度，使机架同时受到热和力的作用。在研究液态模锻液压机机架结构特点的基础上，以Ansys Workbench软件为平台，综合考虑温度和受力情况对机架的影响，对液压机机架进行了有限元分析。结果表明：采用结构静力分析与热应力耦合分析时，机架的最大变形都出现在上横梁液压缸法兰作用的环形面上,分别为0.9938和1.2735 mm；考虑热影响时液压机工作台的应力应变值明显增加，并且立柱的最大变形部位发生变化，由结构静力分析时的中上部变为中下部，径向变形明显增大，由0.1827 mm上升为0.6148 mm。

The liquid forging die in the process of production has a certain temperature, which makes the frame under the dual function of heat and force. Based on the study of the liquid forging hydraulic press frame structure characteristics and Ansys Workbench software, and considering the influence of temperature and stress distribution on the frame, the finite element analysis was carried on the hydraulic press frame. Results show that the largest deformation appears on the hydraulic cylinder flange ring surface of the beam both in the structural static analysis and thermal-mechanical coupling analysis, which are 0.9938 and 1.2735 mm respectively; when considering the effect of heat, the stress-strain value of hydraulic press workbench increases significantly, the maximum deformation position of the columns moves from upper to the lower, and the radial deformation of columns increases obviously, from 0.1827 mm to 0.6148 mm.

基金项目：

宋双双（1991- ），女，硕士研究生

参考文献：

[1]齐丕骧.挤压铸造（液态模锻）技术的最新发展[R].苏州：2007年中外压铸技术交流会，2007.

Qi P X. The latest development of squeeze casting (liquid die forging) technology[R].Suzhou: The Chinese and Foreign Die-casting Technology Exchange Meeting,2007.

[2]宋雷，邵明.挤压铸造设备的研究进展与发展趋势[J].锻造，2010，59(10)：1039-1043.

Song L, Shao M. Research progress and developing trend of squeeze casting equipment[J]. Forging, 2010，59(10):1039-1043.

[3]Ghomashchi M R, Vikrow A.Squeeze casting: overview [J].Journal of Materials Processing Technology,2000,101(1):1-9.

[4]闫红红，李永堂，刘兴，等.80MN双柱斜置式快速锻造液压机有限元分析[J].锻压技术,2013，38(1)：93-97.

Yan H H, Li Y T , Liu X，et al. The finite element analysis of 80MN double column diagonal fast forging hydraulic press[J]. Forging & Stamping Technology, 2013，38(1):93-97.

[5]张倩倩，薛克敏.新型6300 kN模锻液压机结构有限元分析及优化[J].塑性工程学报，2011，18(4)：17-21.

Zhang Q Q, Xue K M. The finite element analysis and structure optimization of new 6300 kN die forging hydraulic press[J]. Journal of Plastic Engineering,2011，18(4):17-21.

[6]张剑寒，曾攀.400 MN航空模锻液压机机架有限元分析[J].锻压技术，2009，34(4)：93-97.

Zhang J H, Zeng P. The finite element analysis of 400 MN air die forging hydraulic press frame[J]. Forging & Stamping Technology, 2009，34(4):93-97.

[7]Zdenek Chval. Effect of Heat Load on a Forging Press[J]. Procedia Engineering,2014,69(3):879-901.

[8]耿鑫明.压铸件生产指南[M].北京市：化学工业出版社，2007.

Geng X M . Die Casting Production Guide[M].Beijing: Chemical Industry Press, 2007.

[9]张倩倩. 6300 kN多向模锻液压机组合机身结构[D].合肥：合肥工业大学，2011.

Zhang Q Q. 6300 kN Multidirectional Die Forging Hydraulic Press Combination Fuselage Structure[D]. Hefei: Heifei University of Technology,2011.

[10]俞新陆，液压机的设计与应用[M].北京：机械工业出版社，2006.

Yu X L. The Design and Application of Hydraulic Press[M].Beijing:China Machine Press,2006.

服务与反馈：

【文章下载】【加入收藏】