锻压技术

汽车CD顶壳精密级进模具的设计

英文标题：Design on precision multi-position progressive die of automobile CD top shell

作者：范玉黄继战范佳琦王凤清

分类号：TG386.42

出版年,卷(期):页码：2015,40(8):103-106

摘要：

对汽车CD顶壳的冲压工艺性进行了深入的分析，确定了工艺方案以及排样设计方案。由于汽车CD顶壳外形尺寸为：176 mm×159 mm×50 mm，三边折弯高度达50 mm，不适合在级进模具上打弯，因此采用由一套精密级进模具、一套成形模和一副机械手组成的自动线进行生产。详细介绍了精密级进模具的结构形式及模具关键零件的设计要点。实现了多工位精密级进模的设计开发和汽车CD顶壳的自动化生产。实践表明，与原来采用5套单工序冲压相比，新工艺不仅保证了产品质量，减小了劳动强度，生产效率也显著提高。

The stamping process of CD top shell for automobile was analyzed deeply, and the process scheme and the nesting were determined. With the size of automobile CD top shell is 176 mm×159 mm×50 mm, and the height of bending in three edges is 50 mm, it is not suitable for bending in progressive die. Therefore, it was conducted by an automatic line which was composed of a set of precision progressive die, a forming die and a manipulator. The structure of the die and main design points of the key components of the die were introduced in detail. The design of precision multi-position progressive die and automatic manufacture for the top shell were realized. Practice shows that comparing with five sets of single stamping used previously, the progressive die not only ensures the product quality, but also reduces the labor intensity, as well as improves the production efficiency significantly.

基金项目：

徐州市科技基金项目（XM13B112）；江苏省住建厅科技项目（2014ZD29）；江苏建筑节能与建造技术协同创新中心课题（SJXTY1503）

范玉(1966-)，男，学士，高级工程师，副教授

参考文献：

［1］何敏红，王树勋. 悬挂件多工位级进模的设计[J]. 锻压技术，2012，37(5)：115-117.He M H, Wang S X. Design of multi-position progressive die for suspension component[J]. Forging & Stamping Technology，2012，37(5)：115-117.
［2］蒙以嫦. 中门导轨滑轮固定板精密级进模设计 [J ]. 锻压技术，2014，39(1)：95-99.Meng Y C. Design of precise progressive die for the guide pulley fixing plate of center door[J]. Forging & Stamping Technology，2014，39(1)：95-99.
［3］成虹，李学锋. 多工位精密级进模排样设计的研究 [J]. 模具工业, 2000,26 (4)：14-16.Cheng H，Li X F. Multi-position precision progressive die design layout [J]. Die & Mould Industry, 2000, 26(4)：14-16.
［4］文建平. 压板冲孔、切断、弯曲级进模设计[J]. 锻压技术，2012，37 (4) ：90-93.Wen J P. Progressive die design for plate punching, cutting, bending processes[J]. Forging & Stamping Technology，2012，37 (4)：90-93.
［5］庞芳. 接触簧片多工位级进模设计[J]. 模具工业，2011，37(10): 32-36.Pang F. Multi-position progressive die for contact spring[J]. Die & Mould Industry，2011，37(10): 32-36.

服务与反馈：

【文章下载】【加入收藏】