锻压技术

金属板材数控渐进分区分阶段成形研究

英文标题：Study on CNC incremental sectioning and staging forming of sheet metal

作者：朱虎林雯雯刘一波白金兰

分类号：TG335.5

出版年,卷(期):页码：2015,40(8):5-8

摘要：

为解决现有金属板材数控渐进反向成形中板材件深度过大、挤压工具长度不足、支撑坯料的厚度不够以及挤压工具与工件干涉等问题，提出了一种根据板材件深度、挤压工具长度、支撑坯料的厚度以及挤压工具与工件干涉等情况、将待成形件模型和支撑模分区后分阶段成形的方法。给出了分区分阶段成形工艺方案，利用数字模拟分析了该工艺方案的可行性，并通过分区分阶段成形实验，实际制作了钣金件。研究结果表明，分区分阶段成形方式可应用于钣金件的制作。

In order to overcome the issues in the CNC incremental negative forming such as extreme depth of the part, insufficient length of pressing tool, thin thickness of the support part, and interference between pressing tool and sheet, a sectioning and staging forming method was proposed, which forms the sheet metal part by sectioning the sheet metal part model with the support part. At the same time, the sectioning and staging forming process was given. The feasibility of the method was analyzed by digital simulation, and a practical sheet metal part was fabricated through the forming experiment. The results show that the sectioning and staging forming technology can be applied in the fabrication of sheet metal parts.

基金项目：

国家自然科学基金资助项目(51175351)；辽宁省高等学校优秀人才支持计划资助项目(LR2012006)

朱虎(1964-)，男，博士，教授

参考文献：

［1］Tisza M. General overview of sheet incremental forming [J]. Journal of Achievements in Materials and Manufacturing Engineering, 2012, 55(1): 113-120.
［2］朱虎，鞠晋，张伟. 面向数控渐进成形鼓包问题的成形轨迹生成与规划[J]. 锻压技术，2015, 40(5): 15-21.Zhu H, Ju J, Zhang W. Forming path generation and planning for the bump phenomenon in NC incremental forming [J]. Forging & Stamping Technology, 2015, 40(5): 15-21.
［3］蔡改贫，陈宗玉，姜志宏. 金属板材渐进成形中局部纵向力的分析[J]. 锻压技术, 2014, 39(9): 31-35.Cai G P, Chen Z Y, Jiang Z H. Analysis on local vertical force during the process of sheet metal incremental forming [J]. Forging & Stamping Technology, 2014, 39(9): 31-35.
［4］Hussain G, Gao L, Hayat N, et al. Tool and lubrication for negative incremental forming of a commercially pure titanium sheet [J]. Journal of Materials Processing Technology, 2008, 203(1-3): 193-201.
［5］Park J J, Kim Y H. Fundamental studies on the incremental sheet metal forming technique [J]. Journal of Materials Processing Technology, 2003, 140(1-3): 447-453.
［6］朱虎, 张伟, 鞠晋. 基于STL模型的数控渐进成形模型姿态确定[J]. 锻压技术，2015, 40(4): 74-78. Zhu H, Zhang W, Ju J. Determination of model posture in CNC incremental forming based on STL model [J]. Forging & Stamping Technology, 2015, 40(4): 74-78.
［7］Hussain G, Gao L. A novel method to test the thinning limits of sheet metals in negative incremental forming [J]. International Journal of Machine Tools & Manufacture, 2007, 47(3-4): 419-435.
［8］王耿，王进，姜虎森，等.工具转速和进给速度对数控渐进成形温升影响[J]. 锻压技术，2014, 39(11): 29-32.Wang G, Wang J, Jiang H S, et al. Influence of rotational speed and feed speed on temperature rise in NC rotational incremental sheet forming [J]. Forging & Stamping Technology, 2014, 39(11): 29-32.
［9］Luo Y X, He K, Du R. A new sheet metal forming system based on the incremental punching, part 1: modeling and simulation [J]. The International Journal of Advanced Manufacturing Technology, 2010, 51(5-8): 481-491.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】