锻压技术

AP1000钢安全壳封头瓣片模压成形回弹模拟及补偿

英文标题：Springback simulation and compensation of molded forming for steel AP1000 containment vessel head petals

作者：杨中伟晏桂珍王国彪杨照东高伟

分类号：TG386

出版年,卷(期):页码：2015,40(8):30-33

摘要：

采用PAM-STAMP 2G 有限元软件，对AP1000钢安全壳大尺寸、中厚度、调质型高强度椭圆形封头瓣片在不同温度下的模压成形回弹进行有限元模拟分析。采用光顺几何补偿算法对模具型面的迭代回弹进行补偿修正，将封头瓣片实际成形后的偏差与模具型面补偿修正模拟的结果进行对比验证。研究结果表明：采用温模压成形可显著地改善封头瓣片的成形效果，其在500 ℃的模压成形回弹量最小；对于模压成形，通过模具型面补偿修正设计合理的型面尺寸，是瓣片获得理想成形精度的一种有效办法。

For steel AP1000 containment vessel with large dimension, medium thickness, tempered and quenched high strength elliptical head petals, the spring-back processes of molded forming under the different temperatures were simulated by finite element analysis software PAM-STAMP 2G. The iterative spring-back values of the die profile were compensated and corrected by the algorithm of smoothing geometry compensation, and the deviation of the actually formed petals was verified by the simulated result. The result shows that the forming quality of the head petals can be significantly improved by warm forming, and its spring-back reaches the minimum value at 500 ℃. Therefore, molded forming is an effective method to obtain perfect petal forming accuracy by designing reasonable profile dimensions based on the compensation and correction of die profile.

基金项目：

国家科技重大专项（2010ZX06001-019）；山东省自主创新成果转化重大专项（2011ZHZX1A0501）

杨中伟(1960-)，男，学士，高级工程师

参考文献：

［1］林诚格. 非能动安全先进核电厂AP1000[M]. 北京：原子能出版社，2008.Lin C G. Advanced Passive Safe Uuclear Power Plant, AP1000 [M].Beijing: Atomic Energy Publishing Company, 2008.
［2］臧明昌. 第三代核电和西屋公司AP1000 评述[J]. 核科学与工程，2005，25（2）：106-115.Zang M C.The third generation NPP and westinghouse AP1000 comment [J].Nuclear Science and Engineering, 2005, 25 (2): 106-115.
［3］龙峻峰，赵阳，吕琳，等.Docol 1200 M超高强钢板温成形性能研究[J].锻压技术，2014，39（2）：37-40.Long J F，Zhao Y，Lv L，et al. Research on warm forming property of Docol 1200 M ultra high strength steel [J]. Forging & Stamping Technology, 2014,39（2）：37-40.
［4］李贵,柳玉起,柯俊逸,等.先进高强度钢板DP590回弹试验及数值模拟研究[J].锻压技术,2013，38（5）:50-55.Li G, Liu Y Q, Ke J Y,et al. Experimental research and numerical simulation of springback for advanced high-strength steel DP500 [J]. Forging & Stamping Technology, 2013,38(5):50-55.
［5］Hindman C，Ousterhout K B. Developing a flexible sheet forming system[J]. Journal of Materials Processing Technology，2000，99：38-48.
［6］李延平，朱东波，卢秉恒. 3D复杂形状板料冲压成形回弹误差补偿方法及其实验验证[J]. 塑性工程学报，2005，12（3）：60-66.Li Y P, Zhu D B, Lu B H. A compensation algorithm of springback error in complex 3D sheet metal forming and experiment validation [J]. Journal of Plasticity Engineering, 2005,12(3):60-66.
［7］李九龙，周凌柯.基于“3σ法则”的显著误差检测[J].计算机与现代化,2012,197（1）:10-13.Li J L, Zhou L K. Detecting and identifying gross errors based on “3σ Rule”[J].Computer and Modernization,2012,197 (1):10-13.
［8］张敏,袁辉.拉依达 ( Pau - Ta) 准则与异常值剔除[J].郑州工业大学学报,1997,18(1):84-88.Zhang M, Yuan H. The Pau-Ta criterion and rejecting the abnormal value[J].Journal of Zhengzhou University of Technology,1997,18(1):84-88.
［9］张晓静,周贤宾.板料成形回弹模拟[J].塑性工程学报,1999,6(3):56-62.Zhang X J, Zhou X B. Simulation of springback in sheet metal forming[J]. Journal of Plasticity Engineering,1999,6(3):56-62.
［10］张晓静,周贤宾,孔永明. 板料成形数值模拟研究[J]. 锻压技术,2001,26(1):13-17.Zhang X J,Zhou X B,Kong Y M. Numerical simulation research on sheet metal forming[J]. Forging & Stamping Technology,2001,26(1):13-17.
［11］ Weiher J，Rietman B，Kose K，et al. Controlling springback with compensation strategies[A].NUMIFORM 2004 Proceedings[C].Columbus，2004.
［12］Ohnimus S，Petzoldt M，Rietman B，et al. Compensating springback in the automotive practice using MASHAL[A]. Proceedings of NUMISHEET 2005[C]. Michigan，2005.
［13］韩方方.板材成形回弹补偿与模具型面设计方法的研究[D]:沈阳：沈阳工业大学,2009.Han F F. Research on Die Surface Designing Method Compensating Springback in Sheet Metal Forming[D]. Shengyang：Shenyang University of Technology,2009.
［14］王书恒,孙纪宁,王玮,等.基于PAM-STAMP 2G的回弹自动补偿功能的模具设计[J].塑性工程学报,2007,14(6):92-95.Wang S H, Sun J N, Wang W, et al.Die compensation for sheet metal forming process using PAM-STAMP 2G[J]. Journal of Plasticity Engineering,2007,14(6):92-95.

服务与反馈：

【文章下载】【加入收藏】