锻压技术

车床主轴毛坯的摆辗成形新工艺探讨

英文标题：Discussion on the new process of rotary forging for lathe spindle blank

分类号：TG316

出版年,卷(期):页码：2015,40(9):57-62

摘要：

传统车床主轴毛坯锻造工艺采用杆部拔长法，这种传统工艺在能源和材料上浪费较大，加工困难且生产效率低。为优化车床主轴毛坯锻造工艺，提出采用端部局部锻造法的新工艺对主轴法兰部分进行局部锻造成形：以厚壁无缝钢管为原始坯料,经过下料——管端局部加热——油压机端部聚料——最终模锻成形法兰。新工艺根据模锻成形选用的设备不同可以分为平锻工艺方案和摆动辗压工艺方案两种，对比分析两种方案的成形力和设备成本，优先采用摆动辗压工艺方案。通过对摆辗新工艺经济效益的定量计算发现，新工艺比传统工艺每年可节约成本192万元。研究结果表明，摆辗新工艺可有效降低成形力，提高产品组织性能，降低劳动强度，具有经济可行性。

The traditional lathe spindle blank forging process is to use the rod part stretching method. It is of the large waste of energy and materials, processing difficulty and low production efficiency. To optimize the lathe spindle forging process, a local forging method on forming the spindle flange was proposed. The processing was as follows: thick wall seamless steel pipe for the initial blank—heating the end part of a steel pipe—gathering the end part of the materials by hydraulic press—die forging the flange. According to the selected equipments, the new forging process could be divided into horizontal forging process and rotary forging process. Comparing their forming force and equipment cost, rotary forging process was selected. Based on its quantitative economic benefit calculation, it is found that the new process can save 1.92 million yuan per year. The results show that rotary forging process can reduce the forming force, improve the microstructure and properties of products and reduce labor intensity, and it has economic feasibility.

基金项目：

粤港关键领域重点突破项目(2009Z019)

许欣珏（1989-），男，硕士研究生

参考文献：

［1］李玉翠. 关于车床主轴的零件机械加工工艺研究[J]. 黑龙江科技信息, 2013， (7): 102-102.Li Y C. Study on the machining process of the lathe spindle parts[J]. Heilongjiang Science and Technology Information, 2013 (7): 102-102.
［2］王仲仁, 皇甫骅, 辛宗仁. 锻压手册（第1卷）锻造[J]. 北京：机械工业出版社,1996.Wang Z R, Huang F H , Xin Z R. Forging Handbook (Volume 1) Forging [J]. Beijing:China Machine Press,1996.
［3］张志文.锻造工艺学[M].北京：机械工业出版社,1988.Zhang Z W. Forging Technology [M].Beijing:China Machine Press,1988.
［4］左旭东, 游国强, 谭霞,等. 摆动辗压工艺及其应用[J]. 热加工工艺, 2013, 42(1):117-120.Zuo X D ,You G Q,Tan X，et al. Rotary forging technology and its application[J]. Heat Processing, 2013, 42(1):117-120.
［5］伍太宾,胡亚民.冷摆辗精密成形[M]. 北京：机械工业出版社, 2011.Wu T B, Hu Y M.The Cold Rotary Forging Precision Forming[M].Beijing: China Machine Press, 2011.
［6］夏华, 胡亚民, 袁亮，等. 汽车半轴热摆辗成形的聚料工序设计[A]. 第九届全国塑性工程学术年会、第二届全球华人先进塑性加工技术研讨会[C]. 太原,2005.Xia H, Hu Y M,Yuan L，et al. Gathering materials process design of automobile half axle heat rotary forging [A]. The 9th National Symposium of Plasticity Engineering,The 2nd Session Of The Global Chinese Advanced Plastic Processing Technology Seminar[C]. Taiyuan, 2005.
［7］胡亚民,伍太宾,赵军华.摆动辗压工艺及模具设计[M]. 重庆：重庆大学出版社, 2001.Hu Y M, Wu T B, Zhao J H. Rotary Forging Process and the Design of the Die[M]. Chongqing:Chongqing University Press, 2001.
［8］胡亚民,华林,韩星会,等.我国高等院校对摆动辗压技术的研究动态[A].第5届全国精密锻造学术研讨会[C].济南，2013.Hu Y M, Hu L,Han X H, et al. Study on the rotary forging technology in our colleges and universities[A]. Fifth National Symposium on Precision Forging[C]. Ji'nan, 2013.
［9］李和平. BJ130汽车半轴摆动辗压新工艺[J]. 热加工工艺, 2006,35(9):55-56.Li H P. BJ130 Automobile half axle rotary forging process [J]. Heat Processing, 2006, 35 (9):55-56.
［10］李和平, 金曼曼. 汽车半轴的摆辗新工艺与传统工艺比较[J]. 热加工工艺, 2008, 37(11):113-115.Li H P,Jin M M. Comparison between new pendulum rolling process and traditional process[J]. Heat Processing, 2008, 37 (11):113-115.
［11］张猛, 朱春东. 汽车锻件加工新技术——汽车车桥半轴锻造生产技术[J]. 机械工人, 1998,(3)：32-33.Zhang M,Zhu C D. The new technology of automobile forging processing—Automobile axle shaft forging production technology[J]. Machinists, 1998,(3):32-33.
［12］黄天佑,都东,方刚.材料加工工艺[M].北京：清华大学出版社,2004.Huang T Y,Du D,Fang G. Materials Processing Technology [M].Beijing: Tsinghua University Press,2004.
［13］胡亚民, 李春天, 周全义. 摆动辗压机的现状及其发展[J]. 精密成形工程, 2009, 1(1):13-20.Hu Y M, Li C T,Zhou Q Y. Present situation and development of rotary forging machine[J]. Precision Forming Engineering, 2009, 1(1):13-20.
［14］吕炎.锻件组织性能控制[M].北京：国防工业出版社,1988.Lv Y. Control of Forging Organizational Performance [M].Beijing: National Defense Industry Press,1988.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】