锻压技术

分块式压边圈盒形件成形数值模拟研究

英文标题：Numerical simulation on the box-rectangular part forming by chunked blank holder

作者：吴斌单云

单位：无锡职业技术学院

分类号：TG386

出版年,卷(期):页码：2015,40(9):139-145

摘要：

建立了分块式压边圈盒形件冲压数值模型，通过在压边圈的短直边Ⅰ、圆角部分Ⅱ、长直边Ⅲ的3个区域施加不同的载荷，研究了定压边力和变压边力对板料冲压成形的影响规律，并以冲压制件的起皱、破裂和厚度分布作为评判标准。研究发现，在定压边力时，圆角区压边力的变化对盒形件拉深成形影响较小，短直边和长直边压边圈压边力变化对拉深成形影响较大，其中长直边影响最大；相对于恒压边力,采用变压边力能够很好地提高板料的成形性能，其中∧型压边力加载方式效果最好。

The simulation model of box-rectangular part stamping by chunked blank holder was established. The influences of constant blankholder force and variable blankholder force on stamping were studied by different loadings on three areas of short straight edgeⅠ, fillet partⅡ, long straight edgeⅢ, and the wrinkle, fracture and thickness distribution of stamping parts were regarded as evaluation standard. The study shows that when the blankholder force is constant, the changing pressure in fillet area has little effect on the formability of drawing, while the changing on the short straight and long straight edge have a greater influence on the deep drawing, especially the long straight edge. However, when the blankholder force is variable, the formability of drawing can be improved well compared with that of constant blankholder force of which the ∧ type of blankholder force is the best.

基金项目：

国家自然科学基金资助项目（51165021）

吴斌（1972-），男，硕士，副教授

参考文献：

［1］王元勋,王书恒,沈为，等. 矩形盒拉深时变压边力的数值模拟[J]. 中国机械工程, 2007,18(10):1226-1229.Wang Y X, Wang S H, Shen W, et al. Numerical simulation of variable blank holder force in rectangular box drawing[J]. China Mechanical Engineering, 2007,18(10):1226-1229.
［2］Benny Endelt, Sren Tommerup, Joachim Danckert. A novel feedback control system-Controlling the material flow in deep drawing using distributed blank-holder force[J].Journal of Materials Processing Technology，2013，123：36-50.
［3］吕盾,陈炜,郭伟刚，等.随行程变化变压边力拼焊板盒形件成形性能研究[J].锻压技术,2006,31(4)：129-131.Lv D, Chen W, Guo W G, et al. The study of forming performance of box shaped blank holder welding plate the biggest changes with the stroke[J]. Forming & Stamping Technology, 2006,31(4)：129-131.
［4］吕盾，陈炜，姜银方，等.变压边力控制技术的研究现状和发展趋势[J].模具工业,2006,32(4):37-41.Lv D, Chen W, Jiang Y F, et al. Research status and development trend of variable blank holder force control technology[J]. Mould & Die Industry, 2006, 32(4):37-41.
［5］魏公际,齐文艺,臧顺来,等.盒形件法兰起皱临界压边力的试验研究[J].锻压技术,2008,33(4):22-26.Wei G J, Qi W Y, Zang S L, et al. Experimental study on the critical pressure of the flange wrinkling of box shaped parts[J]. Forming & Stamping technology,2008,33(4):22-26.
［6］Lin Zhong qin，Wang Wurong，Chen Guanlong.A new strategy to optimize variable blank holder force towards improving the forming limits of aluminum sheet metal forming[J].Journal of Materials Processing Technology,2007,11（23）：339-346.
［7］孙成智,陈关龙,李淑惠，等.变压边力对矩形件成形性能的影响[J]. 塑性工程学报,2003，10(4):6-9.Sun C Z, Chen G L, Li S H, et al. Effect of variable blank holder force on forming properties of rectangular parts[J]. Journal of Plastic Engineering, 2003，10(4):6-9.
［8］Yossifon S, Sweeney, Ahmetoglu Mustafa A, et al. On the acceptable blank-holder force range in the deep-drawing process[J]. Journal of Materials Processing Technology, 1992,33 (1-2):175-194.
［9］Fratini L, Micari F. Investigation effective blank holder force paths to improve the maximum component height in deep drawing process[C]. Numisheet,1999,（99）：267-272.
［10］M.AHmetogle,T.R.Broek,G.Kinzel,et al.Control of Blank holder force to eliminate wrinkling and fracture in deep-drawing rectangular parts[J]. Annals of the CLRP,1995,44(1):247-250.
［11］孙成智，陈关龙，林忠钦，等. 利变压边力控制技术改善盒形件成形性能[J].上海交通大学学报，2003，37（12）：1183-1186.

服务与反馈：

【文章下载】【加入收藏】