锻压技术

AP1000核电主管道支管嘴径向镦挤模具设计及应力分析模具

英文标题：Radial upset-extruding die design and stress analysis on branch pipe of nuclear power AP1000 main-pipe

作者：王欣张磊冯潇林峰王文杰潘际銮

单位：清华大学

分类号：

出版年,卷(期):页码：2015,40(10):96-105

摘要：

针对AP1000核电主管道支管嘴，提出一种新的局部径向镦挤工艺。该工艺以挤压管坯为基础，直接在管坯的局部成形支管嘴。基于这种新工艺，设计了具有垂直合模、水平镦挤功能的多向模锻特点模具。模具结构主要包含模腔结构、合模导向结构、芯轴结构、芯棒结构及镦挤轴结构等部分。对各主要模具的结构设计进行了详细阐述，并对承载能力要求高的模腔结构利用有限元方法进行应力与变形分析。缩比模型镦挤试验结果表明，设计的模具结构可行，强度和刚度满足试验要求。应用该模具成功挤出碳钢和316 LN不锈钢1∶5试验件，为实施1∶1尺寸主管道镦挤工艺提供了模具设计基础。

For the forming of branch pipe of nuclear power AP1000 main-pipe, a novel partial radial upset-extruding (PRUE) process was developed, which produces the branch pipe directly in the part of a pipe billet based on an extruding pipe billet. According to the PRUE process, a multi-ram forging die which could close dies vertically and upset-extruding the billet horizontally was designed. The structure includes die cavity structure, closing guide structure, mandrel structure, mandril structure and upset-extruding shafts, etc. The design of the above structures was presented in detail, and the stress and the distortion of the die cavity structure under the heavy load were analyzed by FEM. The experimental results from the reduced scale model show that the structure is applicable, and its strength and stiffness meet the requirement of experiments. The test parts are successfully extruded with the scale of 1 to 5 of carbon steel and stainless steel 316 LN, which can be the design foundation in the PRUE process of real size main-pipe.

基金项目：

国家科技重大专项资助项目（2012ZX04010082）；国家高技术研究发展计划资助项目（863计划，2012AA040202）

王欣（1981-），男，博士研究生

参考文献：

[1]卢华兴. AP1000核电站主管道国产化研制进展[J]. 上海金属, 2010, 32(4): 29-32.

Lu H X. Research and development of AP1000 reactor coolant pipe in China[J]. Shanghai Metals，2010，32(4):29-32.

[2]陈红宇，宋树康，杜军毅. AP1000锻造主管道制造技术进展[J]. 大型铸锻件, 2013, (2): 1-3.

Chen H Y，Song S K，Du J Y. Manufacturing technology progress for AP1000 forging main pipeline[J]. Heavy Casting and Forging, 2013, (2):1-3.

[3]孙凤先，马庆贤. AP1000主管道控制锻造工艺探索[J]. 大型铸锻件, 2010, (4): 30-32.

Sun F X，Ma Q X. Research on the control forging processes for AP1000 main pipe[J]. Heavy Casting and Forging, 2010, (4):30-32.

[4]潘品李，钟约先，马庆贤，等. 大型核电主管道制造技术的发展[J]. 锻压装备与制造技术, 2011,36(1): 13-17.

Pan P L, Zhong Y X, Ma Q X, et al. Development of manufacture technology for main pipe of large-sized nuclear power[J]. China Metalforming Equipment and Manufacturing Technology, 2011,36(1): 13-17.

[5]清华大学. 用于具有管嘴凸台的管件结构的成型方法和成型装置:中国: 201210236488.9[P]. 2013-02-13.

Tsinghua University. Forming method and forming devices for pipe structure with convex nozzles:China,201210236488.9[P]. 2013-02-13.

[6]张磊，冯潇，李明权，等. 核电主管道制造工艺发展[J]. 锻压技术, 2014, 39(6): 1-8.

Zhang L, Feng X, Li M Q, et al. Development of nuclear power main-pipe manufacturing technology[J]. Forging & Stamping Technology, 2014, 39(6):1-8.

[7]那福利. AP1000主管道的国产化试制和制造许可证审评[J]. 核安全, 2010, (2): 19-24.

Na F L. The localization development and manufacture license review of AP1000 primary piping[J]. Nuclear Safety, 2010, (2):19-24.

[8]Zhang L, Feng X, Wang X, et al. On the constitutive model of nitrogen-containing austenitic stainless steel 316LN at elevated temperature[J]. Plos One, 2014, 9(11):e102687

[9]冯潇. 大口径厚壁钢管支管嘴局部镦挤成形工艺研究[D]. 北京: 清华大学, 2014.

Feng X. Research on the Forming of Branch Pipe of Large Diameter Thick-walled Steel Pipe through Partial Upset-extruding Technology[D]. Beijing: Tsinghua University, 2014.

[10]林峰，张磊，孙富，等. 多向模锻制造技术及其装备研制[J]. 机械工程学报, 2012, 48(18): 13-20.

Lin F, Zhang L, Sun F, et al. Multi-ram forge process and its equipment development[J]. Journal of Mechanical Engineering, 2012, 48 (18):13-20.

[11]黄彩娥. 多向模锻的模具结构和设计[J]. 金属成形工艺, 2000, 18(6): 28-29.

Huang C E. Die construction and design of multiple-ram forging[J]. Metal Forging Technology, 2000, 18(6):28-29.

[12]康俊元. 模具材料与表面处理[M]. 北京: 北京理工大学出版社, 2012.

Kang J Y. Die Material and Surface Treatment[M]. Beijing: Beijing Institute of Technology Press, 2012.

[13]暴志峰，孙志超，杨合. 钛合金筋板件等温局部加载模具应力分析[J]. 塑性工程学报, 2009, 16(5): 30-35.

Bao Z F, Sun Z C, Yang H. Stress analysis of die for Ti-alloy rib-web component isothermal local loading forming[J]. Journal of Plasticity Engineering, 2009,16 (5): 30-35.

[14]庄茁，由小川，廖剑晖，等. 基于ABAQUS的有限元分析和应用[M]. 北京: 清华大学出版社, 2009.

Zhuang Z, You X C, Liao J H,et al. Finite Element Analysis and Application based on ABAQUS[M]. Beijing: Tsinghua University Press, 2009.

[15]曹金凤，石亦平. ABAQUS有限元分析常见问题解答[M]. 北京: 机械工业出版社, 2009.

Cao J F, Shi Y P. Frequently Asked Questions of Finite Element Analysis of ABAQUS[M]. Beijing: China Machine Press, 2009.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】