锻压技术

基于Hypermesh的液压机机身结构优化设计

英文标题：Structure optimization design of hydraulic press body based on Hypermesh

作者：徐晶刘基冈张懿骅

单位：扬州大学盐城工学院

分类号：TG315

出版年,卷(期):页码：2015,40(11):48-51

摘要：

针对液压机机身刚强度不足和偏重问题，运用基于传力路径的结构优化方法，对其进行改进。首先根据压机三维模型建立其有限元模型，进行静态刚强度分析，确定了机身结构中的薄弱环节，然后运用拓扑优化方法，获得了机身的最佳材料分布和结构概念方案，最后运用尺寸优化方法对机身进行详细设计，获得优化的机身结构。结果显示，优化的机身在满载工况下最大位移减小36%，喉口处最大应力减小38.1%，同时本体结构质量减小了12.67%，提高了压机性能,节约了材料，达到了液压机机身结构优化的设计目标。

In the view of insufficient stiffness and over weight of a hydraulic press body, it was ameliorated by the structure optimization based on the force transfer path. First, based on 3D model of the hydraulic press, its finite element model was set up. Then, the static stiffness and strength were calculated, and the weak points of the press body were determined. Further, the best material distribution and the structure concept solution were gained by the topology optimization method, and a detailed design was accomplished by size optimization method. Finally, the optimal body structure was obtained. The result shows that the maximal displacement under the full load reduces by 36%, the maximal stress in the throat opening decreases by 38.1%, and the hydraulic press mass declines by 12.67%. Therefore, the performance of the hydraulic press is improved and the material is saved, and the optimization goal of the hydraulic press body is achieved.

基金项目：

国家自然科学基金资助项目（51205344）；江苏省高校自然科学基金资助项目（12KJB460011）

徐晶 (1978-)，男，博士，副教授

参考文献：

［1］谢峰，雷小宝，沈维蕾，等．基于ANSYS分析与正交实验法的液压机机身轻量化设机[J]．系统仿真学报，2008，20(22)：6054-6057.Xie F, Lei X B, Shen W L, et al. Research on lightweight design of press frame structure based on ANSYS and Orthogonal experiment [J]. Journal of System Simulation,2008，20(22)：6054-6057．
［2］王尚斌，孙宇，张庆飞．5000kN机械压力机机身有限元分析[J]．锻压技术，2009，34(2)：83-86．Wang S B, Sun Y, Zhang Q F. ANSYS analysis of 5000 kN press frame[J]. Forging & Stamping Technology, 2009，34(2)：83-86．
［3］陈永亮，耿文轩，满佳，等．基于结构配置与性能改进综合评价的机床结构适应性设计[J]．中国机械工程，2009，20(9)：1029-1032．Chen Y L, Geng W X, Man J, et al. Adaptable design of machine tool structure based on quantification of structural configuration and performance improvement[J].China Mechanical Engineering, 2009，20(9)：1029-1032．
［4］任翠锋．YH30-400液压机机身结构的有限元分析与优化[D]．合肥：合肥工业大学，2009．Ren C F. Finite Element Analysis and Optimization of YH30-400 Hydraulic Press Frame Structure [D].Hefei：Hefei University of Technology, 2009.
［5］翁纪钊．液压冲床主要结构设计优化及实验研究[D]．广州：广东工业大学，2008．Weng J Z. Design Optimization and Experimental Research the Main Structure of Hydraulic Punch [D]. Guangzhou:Guangdong University of Technology, 2008.
［6］骆念武，申远，竺长安，等．基于有限元分析的液压机上横梁结构改进设计[J]．锻压技术，2009，34(1):119-121．Luo N W, Shen Y, Zhu C A, et al. Structure improvement design for upper beam of forging machine based on FEA [J]. Forging & Stamping Technology, 2009，34(1)；
119-121．
［7］夏琴香，尚慧慧，徐海涛，等．开式机械压力机机身校核与优化模块的开发[J]．锻压技术，2015，40(2)：148-153．Xia Q X, Shang H H, Xu H T, Development of checking and optimization module for open-type mechanical press body [J]. Forging & Stamping Technology, 2015，40(2)：148-153．
［8］章婷．基于有限元法的锻压机床床身结构优化设计[J]．锻压技术，2010，35(6)：74-78．Zhang T. Structural optimization design for forging machine bed based on finite element method[J]. Forging & Stamping Technology, 2010，35(6)：74-78．
［9］杨树凯，朱启昕，吴仕赋．基于有限元技术的汽车支架拓扑优化设计研究[J]．汽车技术，2006，(3)：16-18．Yang S K, Zhu Q X, Wu S F. Study on FEM-based topological optimization design of brackets [J]. Automobile Technology, 2006，(3)：16-18．
［10］李芳，凌道盛．工程结构优化设计发展综述[J]．工程设计学报，2002，9(5)：229-235．Li F, Lin D S. Survey of the developing in engineering structural optimization design [J] Journal of Engineering Design, 2002，9(5)：229-235．

服务与反馈：

【文章下载】【加入收藏】