[1]李永兵, 李亚庭, 楼铭, 等. 轿车车身轻量化及其对连接技术的挑战[J]. 机械工程学报, 2012, 48(18): 44-54.Li Y B, Li Y T, Lou M, et al. Lightweighting of car body and its challenges to joining technologies[J]. Journal of Mechanical Engineering, 2012, 48(18): 44-54. [2]郭玉琴, 朱新峰, 杨艳, 等. 汽车轻量化材料及制造工艺研究现状[J]. 锻压技术, 2015, 40(3): 1-6.Guo Y Q, Zhu X F, Yang Y, et al. Research state of lightweight material and manufacture processes in automotive industry [J]. Forging & Stamping Technology, 2015,40(3): 1-6. [3]王利. 汽车用高强度IF薄钢板[J]. 宝钢技术, 1997,(1): 58-61.Wang L. High tensile strength IF steel sheet for automitive applications[J]. Baosteel Technical Research, 1997,(1): 58-61. [4]叶辉, 朱敏, 胡平. 基于响应面法的车身前端结构钢板材料匹配方法研究[J]. 北京理工大学学报, 2011, 31(8): 901-904.Ye H, Zhu M, Hu P. Optimization compostition of high steel sheets for car body front structures based on response surface methods[J]. Transactions of Beijing Institute of Technology, 2011, 31(8): 901-904. [5]李文学, 姜潮. 车辆正碰安全性的混合可靠度分析[J]. 计算机仿真, 2012, 29(2): 358-361.Li W X, Jiang C. Hybrid reliability analysis for crashworthiness analysis of vehicle [J]. Computer Simulation, 2012, 29(2): 358-361. [6]NCAC.National crash analysis center finite element models [EB/OL].http://www.ncac.gwu.edu/vml/models.html,[2011-12-21]. [7]阮光明. 基于响应面法的DP800高强钢冲压回弹工艺参数优化[J]. 锻压技术, 2015, 40(4):40-44.Ruan G M. Technological parameters optimization of springback for DP800 high strength steel based on response surface method[J]. Forging & Stamping Technology, 2015,40(4):40-44. [8]Fang H B, Mark F Horstemeyer. global response approximation with radial basis function[J]. Engineering Optimization, 2006, 38(4): 407-424. [9]Deb K, Pratap A, Agarwal S, et al. A fast and elitist multiobjective genetic algorithm: NSGA-II [J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182-197. [10]余雄庆, 丁运亮. 遗传算法在含连续/离散变量结构优化中的应用[J]. 南京航空航天大学学报, 1999, 31(5): 564-568.Yu X Q, Ding Y L. Application of genetic algorithms to structural optimization with mixed continuous/discrete design variables[J]. Journal of Nanjing University of Aeronautics & Astronautics, 1999, 31(5): 564-568. [11]孙光永, 李光耀, 陈涛, 等. 多目标粒子群优化算法在薄板冲压成形中的应用[J]. 机械工程学报, 2009, 45(5): 153-159.Sun G Y, Li G Y, Chen T, et al. Application of multi-objective particle swarm optimization in sheet metal forming[J]. Journal of Mechanical Engineering, 2009, 45(5): 153-159.
|