锻压技术

汽车前翼子板冲压成形工艺优化

英文标题：Improvement of stamping process for car front fender

作者：肖红波蔡浩华

分类号：TG386.41

出版年,卷(期):页码：2016,41(2):35-38

摘要：

汽车前翼子板成形通常设计为5道冲压工序，所需模具数量多，成本高。通过研究压缩其冲压工序数，达到工艺优化的目的。分析汽车前翼子板结构特点及其成形工艺过程，调整侧冲孔工序顺序，合并侧冲孔和修边工序，先侧冲孔再整形，使汽车翼子板冲压工序由原来的5道工序减少为4道工序。针对先冲孔再整形易导致孔径和形状变形的技术难题，运用逆向补偿法对孔的超差进行补偿，达到了工艺预期要求。通过企业生产证明，优化后的冲压工艺可行，减少了冲压模具的台套数，缩短了模具生产周期，提高了生产效率，降低了生产成本。

The car front fender is formed by five-step stamping processes normally, so it needs more molds and higher costs. Therefore, the optimization can be achieved by compressing the numbers of stamping processes. Through analyzing the product structure and its forming process, the order of the side punching process was adjusted, the side punching and trimming process were combined, and the side punching was carried out before shaping, so the numbers of stamping process for the car front fender were reduced from five-step to four-step process. However, it was easy to cause deformations on the aperture and the shape. For the above issue, the ultra difference of the hole was compensated by the reverse compensation method to meet the expected requirements. Through the actual production in factories, it is proved that the improved process has a strong feasibility, the number of dies reduces and the production cycle of dies is shortened, and the production efficiency is increased and the manufacturing costs are saved.

基金项目：

湖北省教育厅科研项目（B2015340）

肖红波（1980-），女，硕士，讲师

参考文献：

[1]朱超，胡兆国，曹素兵. 支架冲压工艺及模具设计研究[J]．锻压技术，2014，39(7):58-65.Zhu C，Hu Z G，Cao S B. Study of stamping process and mold design of stand [J]. Forging ＆ Stamping Technology, 2014，39(7):58-65．

[2]蔡丹云，丁明明．汽车冷却器缓冲罩多工位成形工艺设计及数值模拟[J]．锻压技术，2015，40(4):28-32.Cai D Y, Ding M M. Multi-position forming process design and numerical simulation for car cooler buffer [J]. Forging ＆ Stamping Technology，2015，40(4):28-32.

[3]朱梅云，傅建，崔礼春，等．基于变压边力的翼子板拉深成形技术[J]．锻压技术，2012，37(3):28-31.Zhu M Y，Fu J，Cui L C，et al． Drawing technology offender based on variable blank holder force [J]. Forging ＆ Stamping Technology，2012，37(3):28-31．

[4]钟江静，梁士红．接触簧片冲压工艺及模具结构设计[J]．锻压技术，2013，38（4）：106-110.Zhong J J，Liang S H．Design of stamping and die structure for contact spring [J]. Forging ＆ Stamping Technology，2013，38(4):106-110．

[5]林泉，刘驰．前副车架上板冲压工艺及拉延模设计[J]．锻压技术，2015，40(4):45-48．Lin Q，Liu C．Stamping process and drawing die design of upper plate for the front subframe[J]．Forging ＆ Stamping Technology，2015，40(4): 45-48．

[6]胡兆国，朱超，冷祯龙. 分离器冲压工艺及模具设计[J]．锻压技术，2014，39 (6): 105-109．Hu Z G，Zhu C，Leng Z L，Study of the stamping process and the mold design for separator[J]． Forging ＆ Stamping Technology，2014，39(6):105-109．

[7]郑宇锋，苏传义，谢文才，等．CAE 分析在产品设计阶段的应用[J]．锻压技术，2012，37 (2):51-54．Zheng Y F，Su C Y，Xie W C，et al．Application of CAE in the stage of production design[J]． Forging ＆ Stamping Technology，2012，37(2):51-54．

[8]韩小后，殷言春，朱取才．翼子板合并件修边排料工艺优化设计[J]．模具工业，2014，40(11)：20-22.Han X H, Yin Y C, Zhu Q C. Optimization design of trimming and layout process for combined fender[J]. Die and Mould Industry, 2014，40(11): 20-22.

服务与反馈：

【文章下载】【加入收藏】