锻压技术

60 MN自由锻水压机主工作台面结构研究

英文标题：Research on structure of main working table for 60 MN free forging hydraulic press

作者：高明昕宋华李东华胡林翔肖卿鹤张祎

单位：辽宁科技大学

分类号：TH123+.3；TH123+.4

出版年,卷(期):页码：2016,41(3):83-87

摘要：

在对60 MN自由锻水压机进行改造过程中发现，拉紧板变形严重及主工作台面磨损严重，针对此现象提出了一种主工作台面结构的改进方案。基于ANSYS数值模拟软件，对两种结构主工作台面在实际工作状态下的变形规律及应力分布规律进行数值模拟研究，并对两种结构主工作台面在制造、安装、使用、维修及维护等方面进行工艺性能对比分析。分析结果表明，整体结构主工作台面在承受60 MN压力时虽然两侧出现2.058 mm的翘起，但可以明显增大拉紧板工作时的受力面积、减小拉紧板变形量及所受应力，同时具有有效防止氧化铁皮渗漏、提高润滑效率等优点，整体结构主工作台面的改进方案优于分体结构。

When the 60 MN free forging hydraulic press was reconstructed, the serious deformation of the tension plate and the serious swear of the main working table were found. For the above issues, an improved scheme for the main working table was put forward. Therefore, the laws of the deformation and the stress distribution with the two main working tables in the working state were analyzed by software ANSYS. Meanwhile, the processing properties of the manufacture, installation, usage and maintenance for main working tables were studied. It is concluded that when the overall structure of the main working table is under 60 MN pressure, even though both sides appear the 2.058 mm deformation, it can obviously increase the force area by the tension plate, decrease the deformation and the stress of tension plate. In addition, it embodies the advantages of the prevention of iron oxide leakage and the improvement of the lubrication, etc. The final result shows that the improved whole structure of the main working table is better than the fission structure.

基金项目：

辽宁科技大学青年教师科研基金资助项目(201QN09)

高明昕（1985-），男，硕士，讲师通讯作者：宋华（1968-），男，博士，教授

参考文献：

［1］郑文达,权晓惠,李俊辉.锻造液压机的现状及其展望[J].重型机械,2012,(3):2-10. Zheng W D, Quan X H, Li J H. Development history and trend of forging hydraulic press[J].Heavy Machinery,2012,(3):2-10.
［2］何文斌,曾攀,赵加清, 等.重型液压机机架变形的数字图像相关测量与降温法有限元模拟[J].机械工程学报,2015，51(8):34-42.He W B, Zeng P, Zhao J Q, et al. Deformation measurement based on digital image cooling method of heavy hydraulic press frame[J].Journal of Mechanical Engineering, 2015,51(8):34-42.
［3］吴生富.150 MN锻造液压机本体组合结构研究[D].秦皇岛:燕山大学,2006.Wu S F. Study on Composite Structure of Body for 150 MN Hydraulic Press[D]. Qinhuangdao: Yanshan University, 2006.
［4］吕强,张学良,陈永会.80 MN快锻液压机本体结构有限元分析[J].太原科技大学学报,2015,(8):312-316. Lv Q, Zhang X L, Chen Y H. Clearance and creep age design on converter electric safety of metallurgy crane[J].Journal of Taiyuan University of Science and Technology, 2015, (8):312-316.
［5］杜俊雷,陶勇,于江，等.大型模锻液压机移动工作台结构优化及应用[J].中国重型装备,2013,(3):4-6.Du J L, Tao Y, Yu J, et al. Structural optimization and application of moveable table for heavy duty die forging hydraulic press[J].China Heavy Equipment, 2013,(3):4-6.
［6］王文斌,林中钦,李奇，等.机械设计手册[M].3版.北京:机械工业出版社,2004.Wang W B, Lin Z Q, Li Q, et al. Machine Design Handbook[M].Third Edition. Beijing: China Machine Press, 2004.
［7］任志俊,薛国详,汪立亮，等.实用金属材料手册[M].南京:江苏科学技术出版社,2007.Ren Z J, Xue G X, Wang L L, et al. Practical Handbook of Metal Materials[M]. Nanjing: Jiangsu Science and Technology Press, 2007.
［8］周建刚.立辊轧机机架强度和变形的有限元分析[J].机械设计与制造,2008,(8):62-64.Zhou J G. Analysis of strength and deformation of vertical rolling mill housing by finite element method[J].Machinery Design & Manufacture,2008,(8):62-64.
［9］郝立文.120 MN自由锻水压机操作系统改造[J].锻压技术,2014,39(12):75-78.Hao L W. Improvement of control system for 120 MN free forging hydraulic[J].Forging & Stamping Technology,2014,39(12):75-78.
［10］曾祥东，杨固川，张华，等.800 MN大型模锻液压机极限设计制造技术创新[J].锻压技术,2014,39(2):96-101.Zeng X D, Yang G C, Zhang H, et al. Creation of limit design and manufacturing technique for close-die forging hydraulic press of 800 MN[J].Forging & Stamping Technology,2014,39(2):96-101.

服务与反馈：

【文章下载】【加入收藏】