锻压技术

冲孔装置在侧围外板夹具中的应用与研究

英文标题：Application and research of piercing device in the side frame outer panel fixture

作者：郑薇刘春雨

关键词：夹具侧围外板冲孔装置

分类号：

出版年,卷(期):页码：2016,41(4):74-77

摘要：

开发了一种冲孔装置用于某汽车侧围外板焊接夹具，满足了侧围数模在设变过程中模具结构无法满足的内容。通过夹具上的定位销对板件进行孔定位，通过夹钳部位的型面夹紧装置对型面进行夹紧及定位，确保精度要求。重点描述了冲孔装置的结构及工作原理，通过汽缸、滑轨、传感器、冲孔凸凹模的结构设计，实现了设变过程中对侧围增加孔的需求。生产实际证明，该冲孔装置能有效地应用在侧围外板夹具上，满足了生产中对孔精度的要求，降低了车型工装的开发成本及设变费用，提高了生产效率。

A piercing device used in the side frame outer panel fixture of a car was developed, which met the die structure requirement during the design and change process of side frame. The hole of the panel was positioned by positioning pin in fixture, and the profiles were clamped and positioned by clamping device located in the surface of clamping position to ensure the accuracy. The structure and working principle of piercing device were mainly described, the hole added in the side frame during design and change process was realized through the structure designs of cylinder, slippery course, sensors, piercing punch and piercing die. Production practice proves that the piercing device can be effectively used in the side frame outer panel fixture. Therefore, it can meet the production requirement of piercing accuracy, reduce the cost of both model tooling development and design and change, and improve the production efficiency.
Key words: fixture；side frame outer panel; piercing device

基金项目：

国家科技重大专项（2014ZX04002041）

郑薇（1982-），女，学士，工程师

参考文献：

[1]郑金桥，黄勇，王义林，等. 汽车覆盖件冲压工艺设计现状及发展趋势[J].塑性工程学报，2003，10(6)：9-14.

Zheng J Q, Huang Y, Wang Y L, et al. Present situation and prospects of stamping process planning for automobile panels[J]. Journal of Plasticity Engineering, 2003，10(6)：9-14.

[2]王强，黄世军，胥少东，等. 某型轿车门框三维拉弯模具设计方法研究[J]. 锻压技术，2014，39（5）：51-55.

Wang Q，Huang S J，Xu S D，et al. Research on design method of three-dimensional stretch bending die for doorframe of a car [J]. Forging & Stamping Technology，2014，39（5）：51-55.

[3]王孝培.实用冲压技术手册[M]. 北京：机械工业出版社，2001.

Wang X P. Practical Handbook of Stamping Technology [M]. Beijing: China Machine Press, 2001.

[4]王新华.冲模设计与制造实用计算手册[M].北京：机械工业出版社，2011.

Wang X H. Handbook of Computational Design and Manufacture of Practical Die[M]. Beijing: China Machine Press, 2011.

[5]向小汉. 汽车后侧板多工位级进模设计[J]. 锻压技术，2014，39（6）：89-93.

Xiang X H. Design of multi-position progressive die for automobile back side panel [J]. Forging & Stamping Technology，2014，39（6）：89-93.

[6]朱超，胡兆国，曹素兵. 支架冲压工艺及模具设计研究[J]. 锻压技术，2014，39（7）：58-65.

Zhu C，Hu Z G，Cao S B. Study of stamping process and mold design of stand [J]. Forging & Stamping Technology，2014，39（7）：58-65.

[7]崔令江.汽车覆盖件冲压成形技术[M].北京：机械工业出版社，2003.

Cui L J. Technology of Automobile Panel Stamping Forming [M]. Beijing: China Machine Press, 2003.

服务与反馈：

【文章下载】【加入收藏】