锻压技术

锻造操作机钳口与热工件间摩擦因数的试验研究

英文标题：Experimental research on friction coefficient between jaw and thermal parts of forging manipulator

作者：戎雪玲杨晋姜峰

分类号：TG315

出版年,卷(期):页码：2016,41(6):100-103

摘要：

基于锻造操作机夹持热工件的实际工况，将钳口材料ZG310-570和HT350与几种常见的锻件材料组成摩擦副，通过对M-200摩擦磨损试验机进行改造，测试了各摩擦副在常温下的摩擦因数以及高温热试样块温度在降低过程中的各摩擦副间摩擦因数。试验分析表明，试样环ZG310-570与各材料间的摩擦因数小于试样环HT350与各材料间的摩擦因数；随着热试样块温度的降低各摩擦副间的摩擦因数增大。因此，在设计夹持装置时，钳口与热工件间的摩擦因数以热试样块高温下的摩擦因数来选取比较合理。

Based on the actual working condition that the forging manipulator clamping the thermal parts, the friction pairs were made by jaw material ZG310-570 or HT350 with other common materials. The friction coefficient of the friction pairs at normal temperature and in the process of the sample block temperature decrease were tested by the transformed M-200 type friction and wear tester. The experimental results show that the friction coefficients of the ZG310-570 pairs are smaller than that of the HT350 pairs and the friction coefficients increase with the decrease of the sample block temperature. Therefore, when designing of clamping apparatus, it is more reasonable to choose the friction coefficient between jaw and thermal parts according to the friction coefficient at high temperature.

基金项目：

基金项目:国家自然科学基金资助项目（51265022）；甘肃省科技计划资助项目（145RJZA187）

作者简介：戎雪玲（1989-），女，硕士研究生 E-mail：xueling237@163.com 通讯作者：杨晋（1962-），男，学士，教授 E-mail:yangjin@mail.lzjtu.cn

参考文献：

［1］刘松柏，邓华，何竞飞.巨型重载夹持装置动态夹持力建模与承载能力分析[J]. 现代制造工程，2010,(1)：107-111.Liu S B, Deng H, He J F. Dynamic model of the tong force and analysis of load-carrying ability of the large scale heavy-load tong device[J]. Modern Manufacturing Engineering, 2010,(1):107-111.

［2］刘艳妍，杨晋，陈超，等.重载锻造操作机夹持力研究[J].机械工程学报，2012，48(4)：66-70.Liu Y Y, Yang J, Chen C, et al. Research of the chucking power of the heavy-loaded forging manipulator[J]. Journal of Mechanical Engineering, 2012，48(4):66-70.

［3］杨丽新.动态环境下重载锻造操作机夹持力建模及影响规律分析[J].现代制造工程，2014,(3)：82-94.Yang L X. Dynamic grip force of heavy load forging manipulator: modeling and influence factors[J]. Modern Manufacturing Engineering, 2014,(3):82-94.

［4］翟福刚，孔祥东，王林,等.锻造操作机夹持机构最优夹紧力分析[J].机械设计与研究，2010，26(4)：38-43.Zhai F G, Kong X D, Wang L, et al. Study on clamping force of forging manipulator gripping mechanism based on virtual prototype technology [J]. Journal of Machine Design and Research,2010，26(4):38-43.

［5］李群明，高丹，邓华,等.重载夹持装置接触力的封闭性[J].机械工程学报，2010，46(11)：36-42.Li Q M,Gao D, Deng H, et al. The contact force-closure of heavy duty gripping mechanisms[J]. Journal of Mechanical Engineering, 2010，46(11):36-42.

［6］李卫旗，马庆贤.摩擦行为在锻造过程中的研究现状与进展[J].锻压技术，2014，39(6)：19-23.Li W Q, Ma Q X. Developments and prospects of friction behavior during forging process[J]. Forging & Stamping Technology, 2014，39(6):19-23.

［7］何琪功，杨晋.锻造操作机钳口抓取状态的分析与研究[J].锻压技术，2013，38(3)：90-94.He Q G, Yang J. Analysis and research of grabbing condition for forging manipulators jaw[J]. Forging & Stamping Technology, 2013，38(3):90-94.

［8］孟宪国，冯长儒.锻造操作机钳口夹紧力和夹紧缸能力的计算[J].一重技术，2006，(2)：1-3.Meng X G, Feng C R. Jig jaw clamping force and cylinder clamping capacity calculation for forging manipulator [J]. CFHI Technology, 2006，(2):l-3.

［9］陈康，郑茂琦，马春翔,等.基于遗传算法对锻造操作机夹钳机构的优化[J].机械设计与研究，2014，30(1)：6-10.Chen K, Zheng M Q, Ma C X, et al. Optimization design of forging manipulator clamp based on genetic algorithm[J].Journal of Machine Design and Research, 2014，30(1):6-10.

［10］杨文玉.力抓取的接触力建模与可行抓取力分析[J].机械工程学报，2010，46(11)：43-48.Yang W Y. Contact force modeling and feasible grasp force analysis of power grasp [J]. Journal of Mechanical Engineering, 2010，46(11):43-48.

服务与反馈：

【文章下载】【加入收藏】