锻压技术

TB6钛合金定m值法高温超塑性拉伸试验研究

英文标题：Superplastic tensile experiment by the fixed m value method at high-temperature for titanium alloy TB6

作者：马超王高潮

分类号：V261.3+2

出版年,卷(期):页码：2016,41(10):88-91

摘要：

在以往TB6钛合金研究成果的基础上，自行开发出定m值法超塑性拉伸控制程序来研究TB6钛合金的超塑性能，该控制程序具有自行拉伸控制、实时数据采集、分析处理和绘制监控曲线等功能。对该程序进行充分调试后，将TB6钛合金试样放在最佳变形温度750 ℃的条件下，设置拉伸程序中的应变速率敏感指数m值分别为0.30，0.35，0.40和0.45进行高温拉伸试验，采集数据得到TB6钛合金伸长率A分别为285%，318%，337%和367%。通过分析试验结果，绘制了应变速率敏感指数m值与伸长率A的关系曲线，再经回归分析，得到TB6钛合金超塑性应变速率敏感指数m值与伸长率A的关系式。

On the basis of previous research results on TB6 titanium alloy, the superplastic performance of titanium alloy TB6 was studied by self-developed superplastic stretch control program of the fixed m value method. The control program has its own stretch control, real- time data acquisition, processing and analysis, drawing monitoring curve and other functions. After the full commissioning program was debugged, high temperature tensile tests of titanium alloy TB6 were conducted with different strain rates sensitivity index m being 0.30,0.35,0.40,0.45 respectively at deformation temperature 750 ℃, and the elongation A was obtained by collecting data as 285%, 318%, 337%, 367% respectively. Then, after processing and analyzing the experimental results, the relationship curves between strain rate sensitivity index m and elongation A were plotted, and then by regression analysis, the equation between superplastic strain rate sensitivity index m and elongation A was obtained.

基金项目：

国家自然科学基金资助项目（51075196）

作者简介：马超（1986-），男，硕士，讲师 E-mail：machao09JY@163.com

参考文献：

[1]钛合金[EB/OL].http://baike.baidu.com/view/64612.htm? func=retitle，2016-02-25.

Titanium alloy[EB/OL].http://baike.baidu.com/view/64612.htm?func=retitle，2016-02-25.

[2]夏春林，王高潮，邓同生，等. 基于最大m值法的TC4钛合金应变诱发超塑性变形工艺 [J]．机械工程材料，2011，35（6）：28-35.

Xia C L，Wang G C，Deng T S，et al.Strain-induced superplastic deformation process of TC4 titanium alloy based on maximum m value method[J].Materials for Mechanical Engineering，2011，35（6）：28-35.

[3]孙书英，邓超.基于二元相图精确计算钛合金α+β/β相变点[J].钛工业进展，2011，28(3)：21-25.

Sun S Y，Deng C.Accurate calculation of α+β/β phase transition of titanium alloys based on binary phase diagrams[J].Titanium Industry Progress，2011，28(3)：21-25.

[4]赵晓宾，王高潮，曹春晓，等.TC11钛合金的最大m值超塑性变形研究[J].航空材料学报，2008，28(2)：5-8.

Zhao X B，Wang G C，Cao C X，et al.Maximun m superplasicity deformation for TC11 titanium alloy[J].Journal of Aeronautical Materials，2008，28(2)：5-8.

[5]赵晓宾，王高潮，范定兵.基于m值钛合金超塑性变形过程的计算机控制系统[J].南昌航空工业学院学报：自然科学版，2007，(1)：30-34.

Zhao X B，Wang G C，Fan D B.Computer control system of maximum m superplasticity deformation based on titanium alloy [J].Journal of Nanchang Hangkong University：Natural Sciences Edition，2007，(1)：30-34.

[6]马超.钛合金超塑性应变速率敏感指数与延伸率关系研究[D].南昌：南昌航空大学，2013.

Ma C.Research on the Relationship between the Superplastic Strain Rate Sensitivity Index m Value and the Elongation A of Titanium Alloy[D].Nanchang：Nanchang Hangkong University，2013.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】