锻压技术

国内外GH4169棒材质量稳定性分析

英文标题：Analysis on quality stability of alloy GH4169 bars at home and abroad

作者：张方王林岐

单位：中航特材工业（西安）有限公司中航金属材料理化检测科技有限公司

关键词：金属材料特性数据库 GH4169棒材晶粒度力学性能 Co元素

分类号：TG314.3；V252

出版年,卷(期):页码：2016,41(9):111-120

摘要：

高温合金是航空发动机热端零部件制造最常用的材料，但目前未见对其棒材性能指标及批次质量稳定性研究

的相关报道。本文从中航重机股份有限公司的金属材料特性数据库中选取GH4169合金棒材的理化数据进行对

比分析，理化数据涉及国内外6家高温合金生产企业。对比分析了121炉次的GH4169棒材成分、晶粒度、室温

和高温力学性能。结果表明，在GH4169高温合金元素的控制上国内外水平相当，甚至有些元素国内控制范围

比国外更加严格，但主要强化元素Nb含量炉次间不稳定，Co元素含量相比国外较低，相差一个数量级；晶粒

度及力学性能不如国外生产企业稳定。

Superalloy is the most commonly used material for the manufacture of hot-section component in

advanced aero-engine. But at present, there is few research reports about the performance

index and the quality stability of the bar. The physicochemical properties data, relating six

superalloy manufacturing enterprises at home and abroad, of alloy GH4169 bars were collected

from AVIC Heavy Machinery Co.,Ltd. database, and their composition, grain size, room and high

temperature mechanical properties were studied and compared with 121 times heating alloy

GH4169 bars. The results show that the elements control in China is equivalent to the same

level as that in foreign, even the control of some elements is stricter than the foreign one.

However, the control of the main strengthening element Nb is instable at different heats in

China, and the cobalt content of alloy GH4169 bars is lower than one order of magnitude

deviated from that in foreign. In addition, both the grain size and mechanical properties of

the alloys are also instable.

基金项目：

张方（1984-），男，硕士，高级工程师

参考文献：

［1］ HB6702—1993,WZ8系列用GH4169合金棒料[S].HB6702—1993, WZ8 series with GH4169 alloy bar material[S].

［2］ AMS5662，自耗电极或真空感应熔炼耐热耐蚀52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50AI-18Fe镍合金棒材，锻件和环形件1775(968 ℃)固溶和沉淀硬化热处理[S].

AMS5662,Nickel alloy, corrosion and heat-resistant, bars, forgings, and rings 52.5Ni-19Cr-3.0Mo-5.1Cb(Nb)-0.90Ti-0.50AI-18Fe consumable electrode or vacuum induction melted 1775(968 ℃) solution heat treated, precipitation-hardenable[S].

［3］阳志安，肖耀天，师昌绪. Co对镍基高温合金热强性能影响的研究[J]. 金属学报，1983，19(4)：A300-A308.

Yang Z A, Xiao Y T, Shi C X. Effect of Co on high-temperature strength of γ′-precipitated ni-base alloys[J]. Acta Metallurgica Sinica,1983,19(4)：A300-A308.

［4］王春光，王东哲，万红，等. 锻造及热处理工艺对GH4169合金组织与性能的影响[J]. 锻压技术，2014,39(12):14-18.

Wang C G, Wang D Z，Wan H, et al. Influence of forging and heat treatment on structure and property of GH4169 alloy [J] . Forging & Stamping Technology, 2014,39(12):14-18.

［5］周晓虎. GH4169合金涡轮盘锻件粗晶质量分析和控制[J]. 锻压技术, 2004,29(5): 9-11.

Zhou X H. Analysis and control of coarse grain formation of GH4169 alloy turbine wheel[J]. Forging & Stamping Technology, 2004,29(5): 9-11.

［6］杨玉荣，梁学锋，蔡伯成，等. δ相对GH4169合金高温持久性能的影响[J].航空材料学报, 1996, 16(2): 38-39.

Yang Y R, Liang X F, Cai B C, et al. Effect of δ phase on stress-rupture properties of GH4169 alloy[J]. Journal of Aeronautical Materials, 1996,16(2): 38-39.

［7］齐欢. INCONEL 718(GH4169)高温合金的发展与工艺[J]. 材料工程, 2012, (8):93-96.Qi H . Review of inconel 718 alloy: Its history, properties, processing and developing substitutes[J]. Journal of Material Engineering, 2012, (8): 93-96.

［8］刘文昌，姚枚，肖福仁. Inconel 718合金δ相含量的测定及δ相析出[J]. 钢铁，1997，32(5): 56-57.

Liu W C, Yao M, Xiao F R. Determination of δ phase fraction and precipitation behavior of δ phase in inconel 718 alloy[J]. Iron and Steel, 1997, 32(5): 56-57.

［9］杜金辉, 吕旭东, 邓群, 等. GH4169 合金研制进展[J].中国材料进展, 2012, 31(12):12-15.Du J H, Lv X D, Deng Q, et al. Progress in GH4169 alloy development[J]. Materials China, 2012, 31(12):12-15.

［10］刘东，罗子健. GH4169合金锻件的混晶组织[J]. 热加工工艺，2004，33(9)：3-5.

Liu D, Luo Z J. Mixed grain structure of GH4169 alloy forgings[J]. Hot Working Technology, 2004,33(9):3-5.

服务与反馈：

【文章下载】【加入收藏】