锻压技术

双偏心套传动机械摆辗机摆头螺旋线运动轨迹的形成、变异与控制

英文标题：Forming,variation and control on spiral trajectory of rocker of rotary forging machines with double eccentric sleeve transmission

作者：龚小涛耿佩张雪

单位：西安航空职业技术学院西安交通大学重庆五一高级技工学校

关键词：摆动辗压摆头双偏心套螺旋线轨迹

分类号：TG335

出版年,卷(期):页码：2016,41(9):158-160

摘要：

根据摆辗机摆头结构特点，设计了内外偏心套传动矢量运动模型，利用Matlab软件对异速同向双偏心套的运

动轨迹进行了模拟仿真，当外偏心套转速ω1>0，内偏心套转速ω2>0，且ω1≠ω2时，摆辗机摆头的运动轨

迹为螺旋线型，阐述了一个周期内螺旋线空间曲线的形成规律，并对影响螺旋线的参数进行了分析。结果表

明：螺旋线的起点位于(2R,0)处，运动周期为2π，在0~π时刻，摆头轴端中心点逐渐靠近轴心同时螺旋式

上升；在π~2π时刻，摆头轴端中心点逐渐远离轴心同时螺旋式上升；螺旋线旋转的圈数为β或1/β真分数

的分母和分子之差，β或1/β越小，螺旋线的重叠部分越少；β或1/β接近1，螺旋线的重叠部分越多。

For the structural characteristics of rocker of rotary forging, a vector motion model was

designed for inner and outer double eccentric sleeve, and the motion trajectory of double

eccentric sleeve with different speeds and the same direction was simulated by Matlab

software. When the outer eccentric sleeve speed ω1>0 and the inner eccentric sleeve speed

ω2>0, as well as ω1≠ω2, the motion trajectory of rocker of rotary forging machine was a

helical curve. Furthermore, the forming law of helix space curve during a cycle was expounded,

and the parameters influencing helix were analyzed. The results show that the starting point

of helix locates at (2R,0), and the motion cycle is 2π. Thus, at the moment of 0-π,the

center point of rocker shaft end moves backwards to the center of axis gradually and rises

spirally, while at the moment of π-2π,the center point of rocker shaft moves towards to the

center of axis gradually and rises spirally. The spin number of the helix is the difference

between the numerator and denominator of the proper fraction of β or 1/β. The smaller is β

or 1/β, the less is the overlap, but when the β or 1/β is closer to 1, the more is the

overlap.

基金项目：

陕西省教育厅科研计划项目（16JK1401）；西安航空职业技术学院2016～2017年度自选教科研计划项目（16XHKY017）

龚小涛（1983-），男，博士研究生，讲师

参考文献：

［1］胡亚民.中国的摆动辗压技术[J]. 金属加工,2006，（1）：56-62.

Hu Y M. The rotary forming technology in China[J]. Metal Working,2006, (1):56-62.

［2］刘汉贵，黄少东. 波兰PXWP-100C型摆辗机摆头运动轨迹设计的数学依据[J].重型机械,1991，（5）：18-20.

Liu H G, Huang S D. The matematic basis for trajectory design of the head of the rotary forging machine for PXWP-100C [J]. Heavy Machine,1991, (5):18-20.

［3］ Hu Yamin. Four motion types of the upper die of PXWP-100c rocking die press represented by rotating rectors[A]. Rotary Forming Proceeding of International Conference
［C］. Beijing, 1989.

［4］冯文成. 冷摆辗机摆头运动轨迹与成形力的理论分析及实验研究[D]. 北京：机械科学研究总院，2015.

Feng W C. Theoretical Analysis and Experimental Research on Orbital Head Trajectory and Forming Force of Orbital Cold Forming Press[D]. Beijing: China Academy of Machinery Science & Technology，2015.

［5］龚小涛. 汽车半轴摆辗工艺设计及模具失效分析[J]. 热加工工艺,2015, 44(1):159-160.

Gong X T. Swing forging process design and die failure analysis of auto semi-axle[J]. Hot Working Technology,2015, 44(1):159-160.

［6］胡亚民.摆动辗压工艺及模具设计[M]. 重庆：重庆大学出版社, 2008.

Hu Y M. Rotary Rolling Thechnolog and Mould Design[M]. Chongqing: Chongqing University Press, 2008.

服务与反馈：

【文章下载】【加入收藏】