锻压技术

推式割草机机盘拉深成形规律分析与模具设计

英文标题：Analysis on forming laws and die design for the machine plate of pushed mower

作者：崔柏伟承善王国良

单位：常州机电职业技术学院

分类号：TG385.2

出版年,卷(期):页码：2016,41(11):77-81

摘要：

针对推式割草机机盘拉深成形工艺，采用数值模拟方法，分析了机盘拉深成形过程中的金属流动规律，预测了出现的问题和缺陷。对整个拉深过程缺陷产生原因的力学特征进行了分析，采用修正凹模圆角和布置分段拉延筋等措施，改进了成形工艺及模具参数，确定了零件的拉深成形工艺为：拉延筋高度1～5段取5 mm、6～9段取3 mm，压边力为150 kN，并设计了割草机机盘拉深模具，最后通过拉深试验，生产出合格拉深件。该拉深件无裂纹，起皱区域控制在凸缘区域，且最大减薄率小于25%。

For the drawing of the machine plate，the law of metal flow in the process of drawing was analyzed by numerical simulation，and the potential problems and defects were predicted. Then, the analysis on the mechanical characteristics of the defects was carried out through the entire drawing process by amending die radius and arranging segmented drawbead. Furthermore, the processing and the die parameters were improved，and the drawing technology parameters of the parts were determined with the height of the drawbeads 5 mm from 1 to 5 segments and 3 mm from 6 to 9 segments, blank holder force 150 kN. Therefore, the drawing dies of pushed mower machine plate were designed. Finally，the qualified drawing parts were manufactured by drawing tests without crack and with wrinkling area controlled within the flange area，and the maximum thinning rate is less than 25%.

基金项目：

江苏省三新工程项目（NJ2013-04）；江苏高校品牌专业建设工程资助项目（PPZY2015B187）

崔柏伟（1966-），男，学士，高级工程师，副教授

参考文献：

［1］陈文亮.板料成形CAE分析教程[M].北京：机械工业出版社，2006.Chen W L. CAE Analysis Course of Sheet Metal Forming[M]. Beijing：China Machine Press, 2006.
［2］吴诗惇，李淼泉.冲压成形理论及技术[M].2版.西安：西北工业大学出版社，2012.Wu S D, Li M Q. Theory and Technology of Stamping Forming [M]. Second Edition.Xian：Northwestern Polytechnical University Press，2012.
［3］吴建军，周维贤.板料成形基本理论[M].西安：西北工业大学出版社，2012.Wu J J，Zhou W X. Basic Theory of Sheet Metal Forming[M].Xian：Northwestern Polytechnical University Press，2012.
［4］李奇涵，王文广，邓义, 等.基于数值模拟的油箱底壳拉延筋设置与优化[J].锻压技术，2014, 39（12）：31-34.Li Q H，Wang W G，Deng Y，et al. Design and optimization of drawbead of oil pan drawing based on numerical simulation[J].Forging & Stamping Technology，2014, 39（12）：31-34.
［5］李金燕，傅建，彭必友, 等.基于数值模拟的等效拉延筋设计与优化[J].塑性工程学报，2007, 14（5）：14-17.Li J Y，Fu J，Peng B Y，et al. The equivalent drawbead design and optimization based on numerical simulation[J].Journal of Plasticity Engineering，2007, 14（5）：14-17.
［6］陈炎嗣. 冲压模具实用结构图册[M]. 北京: 机械工业出版社，2009.Chen Y S. Practical Structure Atlas of Stamping Die[M]. Beijing: China Machine Press, 2009.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】