锻压技术

插装式比例节流阀自抗扰控制研究

英文标题：Research on active disturbance rejection control for cartridge proportional throttle valve

作者：姚静1 2 3 张阳3 陈浩3 孔祥东1 2 3

单位：河北省重型机械流体动力传输与控制实验室先进锻压成形技术与科学教育部重点实验室燕山大学

关键词：插装式比例节流阀电液位置伺服控制系统系统辨识自抗扰控制阶跃响应抗干扰特性

分类号：TH137.5

出版年,卷(期):页码：2016,41(12):95-101

摘要：

为了克服插装式比例节流阀中流量增益非线性、液动力、摩擦力等多种非线性扰动对阀芯控制性能的影响，提出了三阶自抗扰非线性控制策略。以DN80大流量插装式比例节流阀为研究对象，通过系统辨识的方法建立了较准确的数学模型，并进行了验证。在此基础上设计了三阶自抗扰控制器，并对设计的控制器参数进行了整定优化。通过仿真和实验分别对插装式比例节流阀主阀芯的阶跃响应的快速性和抗干扰特性进行了研究。结果表明：采用自抗扰控制下的主阀芯在阶跃激励下的响应和抗干扰能力方面明显均优于PID控制，系统具有较好的动静态性能和鲁棒性。

In order to overcome the influence of non-linearity, hydrodynamic force, friction force and other nonlinear perturbations on the spool control performance, third - order active disturbance rejection nonlinear control strategies were put forward. For cartridge proportional throttle valve DN80 with large flow rate, its mathematical model was established by the system identification method, and the verification was carried out. On the basis of this, the active disturbance rejection control (ADRC) strategy was adopted, and the parameters of the active disturbance rejection controller were optimized. Furthermore, the fast speed step response and anti-interference characteristics for main valve core of cartridge proportional throttle valve were researched by simulation and experiment. The research results show that the fast speed step response and anti-interference characteristics of main valve core with ADRC are better than that with PID control, and the system has good steady-state performance and robustness.

基金项目：

基金项目:河北省自然科学基金资助项目（E2014203247）

作者简介：姚静(1978-)，女，博士，副教授 E-mail：jyao@ysu.edu.cn

参考文献：

［1］刘莉华，姚静，孔祥东，等．双主动型比例二通节流阀试验与仿真研究
［J］．机床与液压，2010,38(21):37-39.

Liu L H, Yao J, Kong X D. Experiment and simulations study on double-drive proportional two-way throttle valves
［J］. Machine Tool & Hydraulics, 2010,38(21):37-39.

［2］Back W. Design systematic and performance of cartridge valve controls
［A］. International Conference on Fluid Power
［C］. Tampere, Finland, 1987.

［3］Ellman A. Proposal for Utilizing Theoretical and Experimental Methods in Modeling Two-Way Cartridge Valve Circuits
［D］. Tampere: Tampere University of Technology, 1992.

［4］方锦辉，孔晓武，魏建华. 伺服比例阀的非线性建模与实验验证
［J］. 浙江大学学报：工学版，2014，(48):784-790.

Fang J H, Kong X W, Wei J H. Nonlinear modeling and validation of a servo-solenoid valve
［J］, Journal of Zhejiang University，Engineering Science，2014, (48):784-790.

［5］Liu S, Yao B. Automated onboard modeling of cartridge valve flow mapping
［J］. IEEE/ASME Transactions on Mechatronics, 2006(4):381-388.

［6］孔晓武, 方锦辉, 蒲增坤. 主动式比例插装阀与系统工况的匹配性设计
［J］.浙江大学学报：工学版, 2014,48(1): 15-20.

Kong X W, Fang J H, Pu Z K. Compatibility design of active proportional cartridge valve with system conditions
［J］. Journal of Zhejiang University：Engineering, 2014, 48 (1):15-20.

［7］Latour C. Development and testing of measures aimed at the reduction of flow forces in 2-way cartridge valves
［J］. Oelhydraulik and Pneumatik, 1994, 38(12): 54-58.

［8］于良振，王明琳，方锦辉.大流量双主动双电反馈电液比例插装式节流阀研制与开发
［J］. 机床与液压,2010,(2):46-47，82.

Yu L Z, Wang M L, Fang J H. Study and development on a large flow double active and double feedback electro-hydraulic proportional plug-in throttle valve
［J］. Machine Tool & Hydraulics.2010，(2):46-47，82.

［9］Gimkiewicz K. Combined proportional valve and 2-way cartridge valve control for hydraulic drive system
［J］. Oelhydraulik and Pneumatik, 1993, 37(1): 43-51.

［10］José R Valdés，Mario J Miana，José L Núnez. Reduced order model for estimation of fluid flow and flow forces in hydraulic proportional valves
［J］. Energy Conversion and Management, 2008， (49):1517-1529.

［11］张宇琛，赵继云，谢腾飞．二级先导插装阀动态性能仿真与优化
［J］.煤矿机械，2011,32(6):87-89.

Zhang Y C, Zhao J Y, Xie T F. Dynamic properties simulation and optimization of cartridge valve
［J］.Coal Mine Machinery,2011, 32(6):87-89.

［12］韩京清. 从PID技术到“自抗扰控制”技术
［J］. 控制工程, 2002, 9(3): 13-18.

Han J Q. From PID Technique to active disturbances rejection control technique
［J］. Control Engineering of China, 2002, 9(3): 13-18.

［13］Han J Q. From PID to active disturbance rejection control
［J］. IEEE Transactions on Industrial Electronics, 2009,56(3): 900-906.

［14］韩京清. 自抗扰控制技术-估计补偿不确定因素的控制技术
［M］.北京:国防工业出版社,2008.

Han J Q. Active Disturbance Rejection Control Technology-the Control Technology for Estimating and Compensating the Uncertainties
［M］. Beijing: China Defensive Industry Press, 2008.

［15］Guo B Z, Zhao Z L. Weak convergence of nonlinear high-gaintracking differentiator
［J］. IEEE Transactions on Automatic Control, 2013, 58(4): 1074-1080.

［16］姚静，俞滨，李亚星，等. 一种插装式比例节流阀主阀套通孔新结构研究
［J］. 中国机械工程,2014，(4):466-470.

Yao J, Yu B, Li Y X, et al. Study on a new structureof main valve sleeve through-hole for proportional throttle cartridge
［J］.China Mechanical engineering，2014,(4):466-470.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】