锻压技术

高强钢汽车加强板冲压成形数值模拟及试验

英文标题：Numerical simulation and test of stamping forming for automobile reinforcing plate with high strength steel

作者：王明伟高莹莹吕艳

单位：大连工业大学

分类号：TG386

出版年,卷(期):页码：2017,42(2):60-65

摘要：

以某型号汽车加强板为研究对象，设计了联合工装模具。建立了工件成形各工序有限元模型，使用有限元仿真软件Dynaform对加强板冲压成形过程进行了数值模拟，获得了该零件在拉延成形过程中的成形极限图，并进行了相关的实验验证。模拟结果与实验结果吻合较好，说明了所建立的全工序有限元模型的有效性。分析了成形过程中起皱和拉裂的原因，得出了压边力和拉延筋位置对成形质量的影响规律。研究结果表明，通过调节压边力及拉延筋的设置，有效地改善了拉延件成形过程中出现的起皱和开裂问题，进而有效地提高了产品的成形质量。

For the automobile reinforcing plate, the joint tooling die was designed. Then, the finite element model of multi-step process was developed, and the numerical simulation of stamping process for the automobile reinforcing plate was carried out by the finite element software DYNAFORM. Therefore, the forming limit diagram of workpiece was obtained, and the corresponding experiment was carried out. The simulated results are in good agreement with the experimental results, which shows the validity of the present finite element model. Causes of the wrinkling and cracking during the forming process were analyzed, and the influences of blank holder force and position of drawbeads on forming quality were studied. Results show that by adjusting the blank-holder force and the drawbead setting, the wrinkling and cracking problem in the drawing process are solved, and the forming quality of product is improved effectively.

基金项目：

大连工业大学青年基金（QNJJ201204）

王明伟（1976-），男，博士，副教授

参考文献：

［1］刁可山,曹猛,蒋浩民，等.DP600高强钢零件冲压成形有限元仿真及试验[J].塑性工程学报,2010,17(3)：66-69.Diao K S, Cao M, Jiang H M, et al. Finite element simulation and test of DP600 AHSS pressing parts forming[J]. Journal of Plasticity Engineering,2010, 17 (3): 66-69.
［2］杨亘,夏琴香,邱遵文.高强钢板在汽车上的应用及冲压成形性能研究现状[J].现代制造工程,2012,(7): 138-142.Yang G, Xia Q X, Qiu Z W. Applications of high strength steel in automobile and the research status of stamping forming properties[J].Modern Manufacturing Engineering,2012, (7): 138-142.
［3］谢延敏,孙新强,田银,等.基于改进粒子群算法和小波神经网络的高强钢扭曲回弹工艺参数优化[J].机械工程学报,2016,52(19):162-167.Xie Y M, Sun X Q, Tian Y, et al. Optimization of parameters in twist springback process for high-strength sheets based on improved particle swarm optimization algorithm and wavelet neural network [J].Journal of Mechanical Engineering, 2016,52(19):162-167.
［4］张杰,阮光明. 基于多目标优化算法的汽车高强钢零件冲压过程优化 [J]. 塑性工程学报,2015,22(4):67-73.Zhang J, Nguyen Quang-minh. Optimization of stamping process for high strength steel alloy automotive component using a multi-objective genetic algorithm [J]. Journal of Plasticity Engineering, 2015, 22 (4): 67-73.
［5］Martijn H A Bonte, Lionel Fourment, Tientho Do, et al. Optimization of forging processes using finite element simulations [J].Structural Multidisciplinary Optimization, 2010,42（9）: 797-810.
［6］邓永艺.基于Dynaform的翼子板全工序冲压成形仿真分析[A].第三届全国地方机械工程学会学术年会[C]. 三亚,2013.Deng Y Y. Stamping simulation analysis of whole process for wing based on Dynaform [A]. The third National Local Mechanical Engineering Society Annual Meeting and Symposium[C]. Sanya, 2013.
［7］王秀凤，郎利辉.板料成形CAE设计及应用—基于DYNAFORM [M]. 2版.北京：北京航空航天大学出版社,2010.Wang X F, Lang L H. Design and Application of CAE Sheet Metal Forming Based on DYNAFORM [M]. 2nd Edition. Beijing: Beihang University Press, 2010.
［8］李春友.轿车加强板冲压成形仿真分析及优化设计[D].长沙: 湖南大学,2011.Li C Y. Simulation Analysis and Optimization Design of Car Stamping Forming Process [D]. Changsha: Hunan University, 2011.

服务与反馈：

【文章下载】【加入收藏】