锻压技术

冷冲模侧修废料刀工艺方案及结构设计研究与应用

英文标题：Research and application on the process scheme and structure design for the cam-trim scrap cutter of cold stamping die

作者：苏丹杨建谢国文林楷

单位：广州汽车集团股份有限公司

关键词：冷冲压修边模废料刀侧修刃口五轴加工工艺

分类号：TG386.1

出版年,卷(期):页码：2017,42(2):114-118

摘要：

通过多年的设计经验及实践验证，分析了冷冲压修边模废料滑落不顺畅的原因，分析了侧修废料刀的刃口在不同坐标系下的加工区别及造成的影响。从工艺设计、模具结构设计和加工工艺的角度出发，梳理了废料刀的各种排布形式及安装方式，并整理出废料刀在不同排布形式下的设计要点及具体解决方案。采用开口式的侧修废料刀工艺设计思路和一字型的废料刀模具结构设计，并在此基础上配合对应的五轴加工工艺，从而能从根本上解决废料滑落不顺畅的问题。

关键词：冷冲压；修边模；废料刀；侧修；刃口；五轴加工工艺

中图分类号： TG386.1

Through years of design experience and practice, the cause of difficult scrap falling in cold stamping trimming die was analyzed, and the processing difference and the influences of the cutting edge of the cam-trim scrap cutter in different coordinate systems were analyzed. Then, from the view of die structure design and process design, it was summarized various arrangement forms and installation methods of scrap cutter, and the key points of the design in different arrangement forms of the scrap cutter and the specific solution were pointed out. Thus, based on the process design of scrap cutter with open type and linear type die structure design with scrap cutter, corresponding five-axis machining process can solve the problem of scrap falling fundamentally.

基金项目：

苏丹（1981-），男，学士

参考文献：

［1］江维键, 林玉琼, 许华昌. 冷冲压模具设计[M]. 广州: 华南理工大学出版社, 2005.Jiang W J, Lin Y Q, Xu H C. Design of Cold Stamping Mould [M]. Guangzhou: South China University of Technology Press, 2005.
［2］陈世涛，王海玲，何鹏申, 等.汽车翼子板四序化冲压工艺方案及翻边整形模设计[J]. 锻压技术, 2016, 41(5): 106-112.Chen S T, Wang H L, He P S, et al. Four-step stamping process and flanging-sizing die design for car fender [J]. Forging & Stamping Technology, 2016, 41(5): 106-112.
［3］黄天泽. 汽车车身结构与设计[M]. 北京: 机械工业出版社, 2002.Huang T Z. Structure and Design of Car Body [M]. Beijing: China Machine Press, 2002.
［4］尚景容, 姜奎华. 冲压工艺学[M]. 北京: 机械工业出版社, 1999.Shang J R, Jiang K H. Stamping Technology [M]. Beijing: China Machine Press, 1999.
［5］现代模具技术编委会. 汽车覆盖件模具设计与制造[M]. 北京: 国防工业出版社, 1998.Editorial board of Modern Mold Technology. Molds Design and Manufacturing of Automotive Covering Parts [M]. Beijing: National Defense Industry Press, 1998.
［6］侯军伟, 吴转萍. 修边模废料刀的设计及废料的排除[J]. 科技创新, 2012,（10）: 26-27.Hou J W, Wu Z P. The design of the trimming die scrap cutter and scrap out [J]. Science and Technology & Innovation, 2012, （10）: 26-27.
［7］涂光祺. 冲模技术[M]. 北京: 机械工业出版社, 2002.Tu G Q. Technology of Stamping Mold [M]. Beijing: China Machine Press, 2002.
［8］杨玉英. 实用冲压工艺及模具设计手册[M]. 北京: 机械工业出版社, 2005.Yang Y Y. Practical Stamping Process and Die Design Manual [M]. Beijing: China Machine Press, 2005.
［9］彭建声, 吴成明. 简明模具工实用技术手册[M]. 北京: 机械工业出版社, 2002.Peng J S, Wu C M. Concise Mould Worker Practical Technical Manual [M]. Beijing: China Machine Press, 2002.
［10］王树勋. 模具实用技术设计综合手册 [M]. 2版. 广州: 华南理工大学出版社, 2003.Wang S X. Integrated Practical Mold Design Technology Handbook [M]. 2nd Edition. Guangzhou: South China University of Technology Press, 2003.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】