锻压技术

轧制差厚板在汽车冲压件上的应用

英文标题：Application of tailor rolling blank in automobile stamping parts

作者：赵宝岩张晓胜张铁顺常绍祥朱学武

分类号：U270.4

出版年,卷(期):页码：2017,42(3):44-47

摘要：

轧制差厚板作为新兴的汽车白车身轻量化技术，与传统高强钢、激光拼焊板相比，具有轻量化效果好、成本低的特点。本文以汽车白车身左前纵梁内板为载体，进行了轧制差厚板原材料、冲压件模具的开发，并进行了白车身匹配、整车碰撞、质保路试等应用试验，实现了轧制差厚板的规模化生产，并且搭载整车实现了大批量应用。阐述了轧制差厚板在汽车白车身上的应用范围，提出了轧制差厚板冲压件模具的开发要点，并提出了轧制差厚板的整车搭载验证关注点，为轧制差厚板技术在国内自主车型上的应用积累了经验。

Compared with the traditional high strength steel plate, tailor welded blanks (TWB) and so on, tailor rolling blanks (TRB) is of the characteristics of light weight and low cost in the car body lightweight technology. For inside panel of the left front beam, the TRB raw materials and stamping die were developed, and the applied experiments were carried out such as the white body matching, the vehicle collision, the quality of road test and other related tests. Thus, the large scale production was realized, and the scale production and application of TRB were conducted. Furthermore, the application ranges of TRB in automotive white body were determined, and the key points of the development of TRB die and whole vehicle verified were presented. Thus, the application experiences of TRB technology in the domestic independent models are accumulated.

基金项目：

一汽集团2012年工艺创新基金001号

赵宝岩(1985-)，男，学士，工程师

参考文献：

［1］刘相华, 高琼, 苏晨,等. 变厚度轧制理论与应用的新进展[J]. 轧钢, 2012, 29(3):1-7.Liu X H, Gao Q, Su C,et al. New progress of the theory of variable thickness rolling[J].Steel Rolling,2012, 29(3):1-7.
［2］刘相华, 吴志强, 支颖,等. 差厚板轧制技术及其在汽车制造中的应用[J]. 汽车工艺与材料, 2011,(1):30-34.Liu X H,Wu Z Q,Zhi Y, et al. The application of TRB in automobile[J]. Automotive Technology and materials,2011,(1):30-34.
［3］张华伟, 刘立忠, 胡平,等. 轧制差厚板单向拉伸性能研究[J]. 大连理工大学学报, 2012, 52(5):648-651.Zhang H W,Liu L Z,Hu P, et al. Study on TRB uniaxial tensile properties[J]. Journal of Dalian University of Technology,2012, 52(5):648-651.

［4］张华伟,刘相华,刘立忠.轧制差厚板盒形件成形性能研究[J].锻压技术,2015,40(9):11-15.Zhang H W,Liu X H,Liu L Z.Research on formability of box part for tailor rolled blank[J].Forging & Stamping Technology,2015,40(9):11-15.
［5］张华伟，胡平，刘立忠，等. 影响轧制差厚板冲压成形性能的几何参数研究[J]. 机械设计及制造，2012，(4): 7-9.Zhang H W, Hu P, Liu L Z，et al. Research on geometric parameters affecting stamping formability of tailor rolled blank[J]. Machiney Design & Manufacture, 2012，(4):7-9.
［6］Q/CAM-23.14—2015，连续变截面轧制钢板[S].Q/CAM-23.14—2015，Tailor rolled blank[S].
［7］GB/T 12534-1990，汽车道路试验方法通则[S].GB/T 12534-1990，Motor vehicles-general rules of road test method[S].
［8］GB/T 12678—1990，汽车可靠性行驶试验方法[S].GB/T 12678—1990，Reliability running test method for automobiles[S].

［9］QC/T 900—1997，汽车整车产品质量检验评定方法[S].QC/T 900—1997，Method for quality inspection and evaluation of automobile products[S].

服务与反馈：

【文章下载】【加入收藏】