锻压技术

基于Lemaitre韧性断裂准则的1060铝板成形极限研究

英文标题：Study on forming limit of aluminum sheet 1060 based on the lemaitre ductile fracture criterion

作者：赵伟邱小婷陈丽

单位：福州大学

分类号：TG386

出版年,卷(期):页码：2017,42(3):149-153

摘要：

针对成形极限曲线的测定需建立在大量实验基础上，耗时耗材，且需要特定的成形实验机才能完成的不足，采用韧性断裂准则与数值模拟相结合来预测。建立测定成形极限曲线的有限元分析模型，对不同尺寸1060铝板试样成形过程进行数值模拟与分析，并采用Lemaitre韧性断裂准则作为板料破裂与否的判据，找出破裂极限应变值，拟合成形极限曲线；为验证提出方法的正确性，采用实验方法制作1060铝板成形极限曲线，并将其与模拟得到的曲线进行对比，两曲线走向基本一致，有较好的吻合度，表明该方法能够应用于成形极限曲线的预测。

It was wasting time and energy to conduct a large number of experiments for establishing the forming limit curves by the particular forming machine. For the above problems, the forming limit curve could be predicted by combing the ductile fracture criterion and numerical simulation. Then, 3D finite element analysis model was built, and the forming processes of aluminum sheet 1060 with different sizes were simulated and analyzed, and the limit strain of fracture was found by the lemaitre ductile fracture criterion, and the forming limit curve was fitted. In order to verify the correctness of the proposed method, the forming limit curve of aluminum sheet 1060 was made by the experimental method. Furthermore, compared with the curves, they had a good fit for the basic consistency. Thus, the result indicates that the method can be applied to predict the forming limit curve.

基金项目：

福建省教育厅科技项目（JAT160660）；国家级大学生创新创业训练计划项目（201613470002）

赵伟（1987-），男，硕士，讲师

参考文献：

［1］庄蔚敏，曹德闯，叶辉. 基于连续介质损伤力学预测7050铝合金热冲压成形极限[J]. 吉林大学学报，2014，44(2)：409-414.Zhuang W M, Cao D C,Ye H. Prediction of FLD for AA7075 under hot stamping based on continuum damage mechanics[J]. Journal of Jilin University，2014，44(2)：409-414.
［2］谢英，万敏，韩飞. 板料成形极限应力图研究[J]. 机械工程学报，2005，41(7):46-49.Xie Y, Wan M, Han F. Investigation of forming limit stress diagrams of sheet metals[J].Chinese Journal of Mechanical Engineering，2005，41(7):46-49.
［3］于忠奇，杨玉英，王永志，等.基于韧性断裂准则的铝合金板材成形极限预测[J].中国有色金属学报，2003，13(5)：1123-1126.Yu Z Q, Yang Y Y , Wang Y Z, et al. Application of ductile fracture criterion to prediction of forming limit in aluminum alloy sheet forming[J]. The Chinese Journal of Nonferrous Metals,2003，13(5)：1123-1126.
［4］蔡高参，周晓军，陆建江，等.板材充液热成形工艺成形极限预测研究[J]. 锻压技术，2016，41（4）：36-40.Cai G S，Zhou X J，Lu J J，et al. Prediction on forming limit in hot/warm sheet hydroforming process [J].Forging & Stamping Technology，2016，41（4）：36-40.
［5］胡玉梅, 张健, 邓兆祥. 板料成形仿真中冲模速度的确定方法[J].机械工程学报, 2007,43(12):88-92.Hu Y M, Zhang J, Deng Z X. Definition method on punch velocity in forming simulation of sheet metal[J].Chinese Journal of Mechanical Engineering, 2007, 43(12): 88-92.
［6］GB/T 24171.2—2009,金属材料薄板和薄带成形极限曲线的测定第2部分：实验室成形极限曲线的测定[S].GB/T 24171.2—2009，Metallic materials—Sheet and strip—Determination of forming limit curves—Part 2:Determinations of forming limit curves in laboratory[S].

服务与反馈：

【文章下载】【加入收藏】