[1]董海,王宛山,崔金环.汽车顶盖工艺分析及模具设计[J].机械设计与制造,2005,(6):133-135.Dong H, Wang W S, Cui J H. Analysis of technique and design of die for mobile coping[J].Machinery Design & Manufacture, 2005,(6):133-135. [2]宁建华.插座外壳多工位级进模设计[J].锻压技术,2015,40(10):111-115.Ning J H. Multi-position progressive die design of socket housing[J].Forging & Stamping Technology,2015,40(10):111-115. [3]王聪.典型两厢汽车顶盖模具设计及调试案例[J].锻造与冲压,2010,(1):73-78.Wang C. Typical cover mold hatchback design and debugging case [J].Forging & Metalforming,2010,(1):73-78. [4]史茂华.冲压模具设计过程中的关键要素[J].汽车工艺与材料,2011,(3):44-58.Shi M H. Critical factors in the process of stamping tool design [J].Automobile Technology & Material, 2011,(3):44-58. [5]王新华.冲模设计与制造实用计算手册[M].北京:机械工业出版社,2011.Wang X H. Handbook of Computational Design and Manufacture of Practical Die [M]. Beijing: China Machine Press, 2011. [6]闫华军,王丽娟.叉形导电件的多工位级进模设计[J].锻压技术, 2015,40(4):106-110.Yan H J, Wang L J. Design of multi-position progressive die for fork-shaped electrical conductive part [J].Forging & Stamping Technology, 2015,40(4):106-110. [7]向雄方.车身制件翻边整形模设计研究[J]. 模具工业,2009,35(2):33-36.Xiang X F. Design of flanging and sizing die for automobile body parts[J].Die & Mould Industry,2009,35(2):33-36. [8]崔令江.汽车覆盖件冲压成形技术[M].北京:机械工业出版社,2003.Cui L J. Technology of Automobile Panel Stamping Forming [M]. Beijing: China Machine Press, 2003. [9]熊盛勇,夏琴香,陈亚兵,等.基于数值模拟的空调换热器翅片多道次级进拉深成形过程研究[J]. 锻压技术,2015,40(1):27-32.Xiong S Y,Xia Q X,Chen Y B,et al. Research on multi-step progressive drawing of conditioner heat exchanger fin based on numerical simulation [J]. Forging & Stamping Technology,2015,40(1):27-32.
|