锻压技术

Ф508 mm系列薄壁无缝钢管的轧制工艺

英文标题：Rolling process for the Ф508 mm series thinwall seamless steel tubes

作者：何玉林姚年春夏兆春

分类号：TG335.71

出版年,卷(期):页码：2017,42(6):107-110

摘要：

针对大口径薄壁无缝钢管生产困难的问题，在不改造现有设备的基础上，介绍了一种大口径Φ508 mm系列薄壁无缝钢管的轧制新工艺。在本方案中，设计了Φ480 mm的顶头，并且重新设计了穿孔参数，修改了连轧数模，并增加了Φ509.6 mm的芯棒。采用这种新工艺后，Φ508 mm机组薄壁管系列能生产的规格为：外径范围为Φ457~Φ508 mm，壁厚范围为9.5~10.5 mm。本设计方法所生产的大口径薄壁无缝钢管，头部、中间尺寸相对比较稳定，对毛管进行减径、延伸和减壁，改善了荒管内、外表面光洁度，同时提高了壁厚均匀度，壁厚精度可以控制达到±8%以内。

For producing seamless steel tube with large diameter and thinwall, a new rolling process was introduced to produce Φ508 mm series products with
large diameter and thinwall. Then, the piercing plug with Φ480 mm diameter and the perforated parameters were redesigned respectively, and the continuous rolling die was improved and the core rod with Φ509.6 mm diameter was added. Therefore, Φ508 mm series products with outside diameter of Φ457-Φ508 mm and wall thickness of 9.5-10.5 mm can be produced. Finally, the sizes of head and middle of tubes were relatively stable, and the internal and external surface roughness of pierced billet were improved by reducing capillary diameter, extension and wall reduction. At the same time, the wall thickness uniformity was improved, and its precision can be controlled less than ±8%.

基金项目：

江苏省高等职业院校专业带头人高端研修资助项目（2016GRFX009）；淮安市科技局工业项目（HAGZ201613）

何玉林（1975-），女，博士，副教授

参考文献：

［1］严圣祥,钟倩霞.世界上限动芯棒连轧管机的应用和发展[J].钢管,1991,20(3):1-6.

Yan S X, Zhong Q X. The applications and developments of restrained mandrel mills worldwide[J].Steel Pipe,1991,20(3):1-6.

［2］岳世斌,卢立锋,庄钢. Φ460 mm PQF限动连轧管机组工艺装备[J].天津冶金,2009, (2):3-6.

Yue S B, Lu L F, Zhuang G. Optimization design and application for piercing plug of Φ460 mm premium quality finishing[J]. Tianjin Metallurgy,2009, (2):3-6.

［3］卫晓崙,郭火星,殷雪峰.PQF连轧管机Φ488 mm孔型的设计与开发[J].钢管,2010,39(2):34-36.

Wei X L, Guo H X, Yin X F. Design and development of Φ488 mm pass of PQF mill[J].Steel Pipe, 2010,39(2):34-36.

［4］马志勇.世界最大Assel机组[A].钢管学会五届五次会议论文集[C]. 衡阳，2009.

Ma Z Y. The world′s largest Assel unit[A]. Proceedings of 5th session of the 5th Steel Tube Society Meeting[C]. Hengyang,2009.

［5］张迎春,宁艳平,罗辉,等.三辊定心装置在无缝钢管穿孔机上的应用[J].锻压技术,2013,38(1):85-88.

Zhang Y C, Ning Y P, Luo H,et al. Application of threeroll centering device in seamless steel tube punch[J]. Forging & Stamping Technology, 2013, 38(1):85-88.

［6］魏栋,楚志兵,黄庆学,等.基于DEFORM-3D的皮尔格冷轧不锈钢管有限元模拟及分析[J].塑性工程学报,2016,23(5):89-95.

Wei D, Chu Z B, Huang Q X, et al. Finite element simulation and analysis of Pilger cold-rolling of stainless steel tube based on DEFORM-3D[J].Journal of Plasticity Engineering,2016,23(5):89-95.

服务与反馈：

【文章下载】【加入收藏】