锻压技术

军车车门总成柔性化冲压试制工艺研究及应用

英文标题：Research and application on flexible stamping trial technique of military vehicle door assembly

单位：东风汽车公司技术中心

分类号：TG386

出版年,卷(期):页码：2017,42(7):24-30

摘要：

针对车门外板复杂的细节特征需投入多套工装才能保证样件尺寸精度，提出了一种柔性化冲压试制工艺方案。首先分析车门外板必要的成形工序，结合各工序工装特点，将车门外板的拉延、翻边及总成包边3道工序集成在一套工装上，将拉延凹模设计成镶块结构，通过镶块的倒置以及调整修边线和分模线位置实现“一模多用”；其次，给出了该柔性化冲压试制工艺的适用条件；最后以某军车车门总成为例，对该柔性化冲压试制工艺方案及模具进行了验证。结果表明：相比传统方案，该柔性化冲压方案可减少工装2套、节约费用45%、缩减生产周期40%。

For the complexity of detailed features for auto external door panel, which needs the applications of multiple fixture to ensure the size accuracy of sample, a flexible stamping trial technique was proposed. First, necessary forming steps of auto external door panel were analyzed. Combined with the characteristics of each step, the drawing, flanging and crimping steps about the auto external door panel were integrated into a set of fixture. Therefore, the drawing die was designed as an insert structure, and the flexible stamping of one die with multiple-position was realized by the inversion of insert and the reposition of trimming and parting line. Secondly, the application conditions of the flexible stamping trial technique were given. Finally, for the door assembly of a military vehicle, the process scheme and die of the flexible stamping trial technique were verified. The results show that the flexible stamping scheme can reduce two sets of fixture, save 45% cost and shorten the production cycle by 40% compared to the traditional one.

基金项目：

国家自然科学基金资助项目(61374196,51178053)；教育部长江学者和创新团队发展计划项目(IRT1286)

作者简介：阮楹妍（1988-），女，硕士，工程师，E-mail：ruanyy@dfmc.com.cn

参考文献：

[1]赵侠，李延奎，康成. 汽车覆盖件常见质量问题及影响因素研究[J]. 热加工工艺，2010，39（15）：185-187.

Zhao X，Li Y K，Kang C. Study of common quality problem and influencing factors of auto covering parts [J]. Hot Working Technology，2010，39（15）：185-187.

[2]杨兰香. 影响汽车覆盖件拉伸质量的因素[J]. 模具工业，2001，27（4）：17-20.

Yang L X. The factors affecting the drawing quality of the auto body metals sheets[J]. Die & Mould Industry，2001，27（4）：17-20.

[3]吴华杰，谷芳，李建华.新型轻质汽车车身覆盖件研究进展[J]. 小型内燃机与车辆技术，2016，45（6）：92-96.

Wu H J，Gu F，Li J H. Recent progress in novel light automobile panel research[J]. Small Internal Combustion Engine and Vehicle Technique，2016，45（6）：92-96.

[4]肖红波，蔡浩华. 汽车前翼子板冲压成形工艺优化[J]. 锻压技术，2016，41（2）：35-38.

Xiao H B，Cai H H. Improvement of stamping process for car front fender [J]. Forging & Stamping Technology，2016，41（2）：35-38.

[5]宁成久，李凯. 新宝来车型左右前翼子板冲压工艺设计及优化[J]. 汽车工艺与材料，2016，（11）：3-7.

Ning C J，Li K. Stamping process design and optimization for the left and right front fender of new bora[J].Automobile Technology & Material，2016，（11）：3-7.

[6]涂明安，缪康鹏，周凯.车身试制阶段的包边形式[J]. 上海汽车，2017，（2）：30-34.

Tu M A，Miao K P，Zhou K. The hemming means in body trial stage[J]. Shanghai Auto，2017，（2）：30-34.

服务与反馈：

【文章下载】【加入收藏】