锻压技术

冷轧机轧制参数对振动临界速度的影响

英文标题：Influence of rolling parameters of cold rolling mill on vibration critical speed

作者：陈晓军

单位：南通开放大学

分类号：TG333

出版年,卷(期):页码：2017,42(7):92-96

摘要：

轧机升速进入高速轧制阶段后，常发生振动现象，其中三倍频程垂振最为强烈，以此为研究对象，通过分析振动机理得出辊缝间产生的负阻尼效应导致振动临界速度降低，自激振动更易形成。对已投产轧机的抑振改进不宜进行大范围的结构改进，应从轧制参数的角度进行分析。运用计算机仿真方法研究轧制参数中乳化液黏度、带钢入口厚度、带钢出口厚度、带钢变形抗力、辊缝间阻尼对振动临界速度的影响，获得相应的非线性关系，并通过轧制试验进行验证。通过调整相关轧制参数，提升振动临界速度，使之总高于轧制速度，保证轧机的稳定运行。

Vibration phenomenon often occurs in the high-speed rolling stage of rolling mill, and three-time frequency vertical vibration is the strongest. For this rolling mill, it is found that the negative damping effect between roll gaps reduces vibration critical speed by analyzing vibration mechanism, and the self-excited vibration is more easily to form. The improvement on vibration suppression of rolling mill used in production should be analyzed by adjusting rolling parameters without changing the structure aggressively. Then, influences of emulsion viscosity, strip entry thickness, strip exit thickness, strip deformation resistance and roll gap damping on the vibration critical speed were studied by computer simulation, and the corresponding non-linear relationship was obtained. Then, it was verified by rolling experiments. Furthermore, the vibration critical speed is enhanced by adjusting rolling parameters to ensure that it is consistently higher than the rolling speed, which brings the stability to the operation of rolling mill.

基金项目：

国家软科学计划科技部资助项目（2014GXS4B046）

作者简介：陈晓军（1972-），男，硕士，副教授，E-mail：chenxj_513@sina.com

参考文献：

[1]侯福祥，张杰，曹建国，等.带钢冷轧机振动问题的研究进展及评述[J] .钢铁研究学报，2007，19(10)：6-10.

Hou F X，Zhang J，Cao J G，et al.Review of chatter studies in cold rolling [J].Journal of Iron and Steel Research，2007，19(10)：6-10.

[2] 段吉安，钟掘.高速轧机工作界面的负阻尼特性[J].中南工业大学学报：自然科学版，2002，33(4)：401-404.

Duan J A，Zhong J.Negative damping of rolling interface for rolling chatter [J].Journal of Central South University：Science and Technology，2002，33(4)：401-404.

[3]曾春，张凤泉，骆忠汉.一种高刚度六辊轧机机架刚度和模态分析[J] .武汉工程职业技术学院学报，2013，25 (1)：5-8.

Zeng C，Zhang F Q，Luo Z H.The analysis of stand rigidity and modality of a type of high rigidity 6-roller rolling mill [J] .Journal of Wuhan Engineering Institute，2013，25 (1)：5-8.

[4]郜志英，臧勇，曾令强.轧机颤振建模及理论研究进展[J].机械工程学报，2015，51(16)：87-105.

Gao Z Y，Zang Y，Zeng L Q.Review of modelling and theoretical studies on chatter in the rolling mills [J].Journal of Mechanical Engineering，2015，51(16)：87-105.

[5]宋蕾，沈明钢，杨利坡，等.横向厚差与宽厚比对冷轧带钢临界失稳板形的影响[J].塑性工程学报，2015，22(4)：54-60.

Song L，Shen M G，Yang L P，et al.Effect of the lateral thickness difference and the width-thickness ratio on the critical instability shape of cold rolled strip [J].Journal of Plasticity Engineering，2015，22(4)：54-60.

[6]徐忠兰，梁胜龙.辊缝摩擦因数对轧机垂直振动的影响[J].锻压技术，2015，40(12)：67-70.

Xu Z L，Liang S L.Influences of roll gap friction coefficient on rolling mill vertical vibration [J].Forging & Stamping Technology，2015，40(12)：67-70.

服务与反馈：

【文章下载】【加入收藏】