锻压技术

MF和EDT表面对汽车铝板的成形性能影响试验

英文标题：Experiment on forming performance of 6016 aluminum body sheet with MF and EDT surface texture

作者：刁可山

分类号：TG386

出版年,卷(期):页码：2017,42(8):152-156

摘要：

汽车铝板常见的两种表面形貌MF表面和EDT表面对汽车铝板的性能尤其是冲压成形性能影响较大。选取力学性能接近的具有MF和EDT两种表面形貌的各2种6016汽车铝板，系统研究了表面形貌对6016汽车铝板表面性能和成形性能的影响规律。试验结果表明：EDT铝板的表面粗糙度是MF铝板的2.5~4倍；EDT铝板比MF铝板有更高的成形极限FLD0；MF和EDT两种铝板的表面摩擦系数、弯曲性能和拉深性能相近。

Mill Finish (MF) and Electron Discharge Texture (EDT) commonly existing in the surface of aluminum body sheet (ABS) have a great influence on the properties of ABS, especially the stamping properties. The effects of surface topography on the surface properties and forming properties of 6016 ABS were systematically studied based on two kinds of ABS with MF and EDT surface topography and similar mechanical properties. The results show that the roughness of ABS with EDT surface is 2.5 to 4 times that of ABS with MF surface, ABS with EDT surface has higher forming limit FLD0 than the one with MF surface, and the friction properties, FLD0, bending and drawing properties of 6016 ABS with MF and EDT surface textures are similar.

基金项目：

刁可山(1979-)，男，博士，高级工程师

参考文献：

［1］Mordike B L, Ebert T. Magnesium properties-applications-potential [J]. Material Science & Engineering A, 2001,302(1):37-45.
［2］Sakurai T. Technical trend of aluminum alloy sheets for automobile [J]. Kobe Steel Works Engineering Reports, 2007,57(2): 45-50.
［3］Wang H, Luo Y B, Friedman P, et al. Warm forming behavior of high strength aluminum alloy AA7075[J]. Transactions of Nonferrous Metals Society of China, 2012,22(1):1-7.
［4］Olaf Engler, Carmen Schfer, Ole Runar Myhr. Effect of natural ageing and pre-straining on strength and anisotropy in aluminium alloy AA 6016[J]. Materials Science & Engineering A, 2015, 639: 65-74.
［5］Lucachick G A, Sanchez L R. Surface topography changes in aluminum alloy sheet during large plastic straining under cyclic pure bending[J]. Journal of Materials Processing Technology, 2013, 213(2):300-307.
［6］Zhou R, Cao J, Wang Q J, et al. Effect of EDT surface texturing on tribological behavior of aluminum sheet[J]. Journal of Materials Processing Technology, 2011, 211(10):1643-1649.
［7］Hartfield-Wunsch S E, Cohen D, Sanchez L R，et al. The effect of surface finish on aluminum sheet friction behavior[J]. SAE International Journal of Materials and Manufacturing, 2011, 4(1): 818-825.
［8］Yoichi T，Kazuhiro A. Hot-dip galvanized steel sheet with excellent surface quality for automotive outer panels [J]. JFE Technical Report, 2004，(4):55-60.
［9］吴华，蒋浩民，李川海，等. 钢板力学性能对FLD0影响的试验研究[J]. 精密成形工程, 2003,21(6):95-97.Wu H, Jiang H M, Li C H, et al. The influence of steel sheet's mechanical property to FLD0[J]. Netshape Forming Engineering, 2003, 21 (6):95-97.
［10］GB/T 15825.8—2008，金属薄板成形性能与试验方法第8部分：成形极限图（FLD）测定指南[S].GB/T 15825.8—2008，Sheet metal formability and test methods—Part 8: Guidelines for the determination of forming-limit diagrams[S].
［11］GB/ T 15825.3—2008，金属薄板成形性能与试验方法第3部分：拉深与拉深载荷试验[S].GB/T 15825.3—2008，Sheet metal formability and test methods—Part 3: Drawing and drawing load test[S].

服务与反馈：

【文章下载】【加入收藏】