锻压技术

显微组织对TA11钛合金棒材力学性能的影响

英文标题：Influence of microstructure on mechanical properties of titanium alloy TA11 bar

分类号：TG146.2

出版年,卷(期):页码：2017,42(8):146-151

摘要：

通过对TA11钛合金不同组织状态的棒材进行组织、性能检测分析，研究了初生α相含量和尺寸对TA11钛合金室温拉伸性能、热稳定性能、蠕变性能的影响。研究结果表明，初生α相含量对TA11钛合金的拉伸性能影响较小，但对合金的抗蠕变性能影响明显：初生α相含量在50%～90%范围内时，合金的室温拉伸性能、热稳定性能随初生α相含量的增加变化不明显，抗蠕变性能随初生α相含量的增加而提高；初生α相尺寸对TA11钛合金的拉伸性能、蠕变性能具有一定的影响，随着组织粗大程度的增加，拉伸强度降低，抗蠕变性能提高。

The influences of the content and size of primary α-phase on tensile properties, thermal stability and creep properties of titanium alloy TA11 were investigated by analyzing microstructures and properties of titanium alloy TA11 in different tissues. The results show that the primary α-phase content has little effect on the tensile properties of titanium alloy TA11, but it has obvious effect on the creep properties of alloy. When the content of primary α-phase is within the range of 50%-90%, the tensile strength and thermal stability of the alloy at room temperature do not change significantly with the increase of the primary α-phase content, and the creep properties increase with the increase of the primary α-phase content. However, the primary α-phase size has a certain influence on the tensile properties and creep properties of titanium alloy TA11. With the increase of the coarse structure, the tensile strength decreases and the creep properties are improved.

基金项目：

国家重点研发计划（2016YFB0701305）；陕西省科技统筹创新工程计划（2016KTCQ01-100）

郑念庆(1984-)，男，工程师，硕士

参考文献：

［1］Liu X L, Xu Y M, Tao C H. Evaluation of vibration stress of TA11 titanium alloy blade by quantitative fractography [J]. Rare Metals, 2014, 33(3):263-269.
［2］Zhang X H, Liu D X. Effects of temperature, slip amplitude, contact pressure on fretting fatigue behavior of Ti811 alloys at elevated temperatures [J]. Acta Metallurgica Sinica,2009,22(2):131-137.
［3］党淼,齐广霞,史丽坤. TA11钛合金高温变形微观组织演变分析[J]. 热加工工艺,2010,39(4):44-46.Dang M, Qi G X, Shi L K. The microstructure evolution of high temperature deformation of TA11 alloy [J]. Hot Working Technology,2010,39(4):44-46.
［4］王芳,闵慧娜,齐广霞. TA11钛合金叶片预锻过程三维热力耦合数值模拟[J]. 锻压技术,2010,35(5):164-168.Wang F, Min H N, Qi G X. 3D thermal couple numerical simulation on precision forging process of TA11 alloy blade [J]. Forging & Stamping Technology,2010, 35(5):164-168.
［5］Zhang X H, Liu D X. Effect of TiN/Ti multilayer on fretting fatigue resistance of Ti-811 alloy at elevated temperature [J]. Transactions of Nonferrous Metals Society of China, 2009, 31(5): 889-893.
［6］段晓辉,李渭清,李峰丽,等. 热加工工艺对TA11钛合金棒材特性的影响[J]. 世界有色金属,2016, (14):47-49.Duan X H, Li W Q, Li F L, et al. Effect of hot working process on properties of TA11 alloy [J]. Word Nonferrous Metals, 2016, (14):47-49.
［7］杜舜尧,陈明和,谢兰生,等.Ti6AlV合金的高温短时蠕变本构关系与应力松弛行为[J].中国有色金属学报,2015,25(12):3344-3351.Du S Y, Chen M H, Xie L S, et al. Short-term creep constitutive relation and stress relaxation behavior of Ti6Al4V alloy at high temperature[J].The Chinese Journal of Nonferrous Metals,2015,25(12): 3344-3351.
［8］齐广霞,于广义,陈晓峰. TA11钛合金亚动态再结晶行为研究[J]. 锻压技术, 2011, 36(2):111-115.Qi G X, Yu G Y, Chen X F. Study on sub-dynamic re-crystallization behavior of TA11 alloy [J]. Forging & Stamping Technology, 2011, 36(2):111-115.
［9］王敏敏,赵永庆,周廉. 影响钛合金蠕变行为的因素分析[J].稀有金属材料与工程,2002,31(2): 135-139.Wang M M, Zhao Y Q, Zhou L. Analysis of factors influencing creep behavior of titanium alloy [J].Rare Metal Materials and Engineering, 2002,31(2):135-139.
［10］李学雄, 夏长清,戚延龄,等.TC6钛合金的高温拉伸蠕变行为研究[J].稀有金属材料与工程,2013,42(9):1901-1904.Li X X, Xia C Q, Qi Y L, et al. Tensile creep behavior at high temperature of TC6 alloy [J]. Rare Metal Materials and Engineering, 2013,42(9):1901-1904.
［11］石多奇,骆银银,赵鹏涛,等. 低周疲劳预损伤对TA11合金高周疲劳强度的影响[J]. 航空动力学报,2016,31(2):257-265.Shi D Q, Luo Y Y, Zhao P T, et al. Effect of low cycle fatigue on high cycle fatigue strength of TA11 alloy [J].Journal of Aerospace Power,2016,31(2): 257-265.
［12］蔡建明,马济民,黄旭,等.高温钛合金中杂质元素Fe的扩散行为及其对蠕变抗力的损害作用[J].材料工程,2009,(8):84-88.Cai J M, Ma J M, Huang X, et al. Diffusion behavior of impurity iron in high temperature titanium alloys and its detrimental effect on creep resistance[J].Journal of Materials Engineering, 2009,(8):84-88.
［13］陶春虎,刘庆泉,曹春晓,等. 航空用钛合金的失效及预防[M]. 北京：国防工业出版社，2002.Tao C H, Liu Q Q, Cao C X, et al. Failure and Prevention of Aerospace Titanium Alloy[M]. Beijing: National Defense Industry Press, 2002.
［14］郑修麟. 工程材料的力学行为[M]. 西安：西北工业大学出版社,2004.Zheng X L. Mechanical Behavior of Engineering Materials [M].Xi′an: Northwestern Polytechnical University Press, 2004.

服务与反馈：

【文章下载】【加入收藏】