锻压技术

TC11钛合金构件冲锻成形工艺

英文标题：Stamping-forging process of titanium alloy TC11 components

作者：杨文华吉卫周朝辉郝爱国赵建斌

单位：中国工程物理研究院

分类号：TG316

出版年,卷(期):页码：2017,42(9):14-19

摘要：

采用一种集合冲压和锻造的冲锻复合成形新工艺成形小圆角变壁厚的钛合金构件。先分别通过大圆角R15 mm、小圆角R5 mm的两次拉深后，运用Deform-3D有限元软件研究了两次镦粗侧壁和3次镦粗侧壁过程。结果表明：通过两次镦粗侧壁能够实现侧壁增厚，但圆角区域容易出现折叠、夹层等缺陷；通过3次镦粗侧壁，控制每次镦粗的壁厚变化倍数不大于1.35，可以实现侧壁增厚3~4 mm，圆角增厚8 mm。采用该工艺进行零件加工，可以降低对设备吨位的要求、提高材料利用率和零件质量，在生产中具有良好的经济效益。

The titanium alloy component with small fillet and variable wall thickness is formed by a new stamping-forging composite process. First, twice deep drawing with R15 mm and R5 mm were conducted, and the processes of twice and three times upsetting the side wall were studied by the finite element software Deform-3D. The results show that the side wall thickening can be achieved by twice upsetting, and folding and interlayer defects appear easily. However, thickening the side wall 3-4 mm and the fillet 8 mm can be achieved by three times upsetting the side wall to control the wall thickness variation less than 1.35. Thus, this technology can reduce the requirement to the equipment tonnage and improve the utilization ratio of material and the quality of parts, which has a promising economic benefit in production.

基金项目：

中国工程物理研究院精密实验室资助项目(K848-13-JSS)

杨文华（1988-），男，硕士，工程师 E-mail：ywh060962@126.com

参考文献：

［1］曾卫东, 周义刚. 冷速对TC11合金β加工显微组织和力学性能的影响[J]. 金属学报, 2002, 38(12): 1273-1276.

Zeng W D, Zhou Y G. Influence of cooling rate on microstructure and mechanical properties of bata processed TC11 alloy[J]. Acta Metallurgica Sinica, 2002, 38(12): 1273-1276.

［2］唐光昕, 朱张校. TC11合金在不同热处理条件下的显微组织分析[J]. 稀有金属, 2002, 26(2): 146-148.

Tang G X, Zhu Z X. Microstructural analysis of TC11 alloy by different heat treatment[J]. Chinese Journal of Rare Metals, 2002, 26(2): 146-148.

［3］孙宇, 曾卫东,赵永庆,等. 基于BP神经网络的TC11钛合金工艺-性能模型预测[J]. 稀有金属材料与工程, 2011, 40(11): 1951-1955.

Sun Y, Zeng W D,Zhao Y Q, et al. Model prediction of processing-property of TC11 titanium alloy using artificial neural network[J]. Rare Metal Materials and Engineering, 2011, 40(11): 1951-1955.

［4］李进元，王宏权，侯鹏，等. 锻造工艺对TC11饼材显微组织和性能的影响[J]. 锻压技术, 2015, 40(5): 7-10.

Li J Y, Wang H Q, Hou P, et al. Influence of forging process on microstructure and properties of forged TC11 disc[J]. Forging & Stamping Technology, 2015, 40(5): 7-10.

［5］姚彭彭，李萍，李成铭，等. TA15钛合金β热变形行为及显微组织[J]. 稀有金属, 2015, 39(11): 967-974.

Yao P P, Li P, Li C M, et al. Hot deformation behavior and microstructure of TA15 titanium alloy in β field[J]. Chinese Journal of Rare Metals, 2015, 39(11): 967-974.

［6］单德斌，史科，徐文臣，等. TC11钛合金热变形机制及其热加工图[J]. 稀有金属材料与工程, 2009,38(4)：632-636.

Shan D B, Shi K, Xu W C, et al. Hot deformation mechanism and processing map of TC11 alloy[J]. Rare Metal Materials and Engineering, 2009,38(4)：632-636.

［7］王新云, 夏巨谌, 陈志明,等. 板冲锻成形新工艺及其在轿车飞轮盘加工中的应用[J]. 塑性工程学报, 2008, 15(4):180-184.

Wang X Y, Xia J C, Chen Z M, et al. Application of a new sheet stampting-forging hybrid technology in the forming of flying wheel panel of car[J]. Journal of Plasticity Engineering, 2008, 15(4): 180-184.

［8］王新云, 罗文涛, 夏巨谌,等. 汽车飞轮盘温冲锻成形工艺研究[J]. 锻压技术, 2009, 34(5):43-46.

Wang X Y, Luo W T, Xia J C, et al. Investigation of warm stamping-forging process for car flywheel panel[J]. Forging & Stamping Technology, 2009, 34(5):43-46.

［9］郑秋, 王新云, 夏巨谌. 离合器毂体中心孔缘的冲锻成形工艺研究[J]. 锻压技术, 2011, 36(4):30-34.

Zheng Q, Wang X Y, Xia J C. Study of stamping-forging hybrid forming for center hole edge of clutch hub[J]. Forging & Stamping Technology, 2011, 36(4): 30-34.

［10］李建平, 车路长. 罩体类零件冲压冷锻成形工艺有限元模拟及试验分析[J]. 重庆职业技术学院学报, 2007, 16(3): 132-135.

Li J P, Che L C. Finite covering elements simulation and experimental analysis of the flow control forming of sheet metal[J]. Journal of Chongqing Vocational & Technical Institute, 2007, 16(3): 132-135.

［11］王刚, 薛克敏, 王刚超,等. 离合器连轴体冲锻成形数值模拟研究[J]. 金属加工, 2011, (3):55-57.

Wang G, Xue K M, Wang G C, et al. The clutch connecting shaft body press forging forming numerical simulation research[J]. Metal Forming, 2011, (3): 55-57.

［12］严军, 巩子天纵, 袁宝国. 双向凸台皮带轮冲锻成形有限元分析[J]. 精密成形工程, 2012, 4(6):91-94.

Yan J, Gong Z T Z, Yuan B G, et al. FEM analysis of pulley with bidirectional boss in stamping-forging hybrid forming[J]. Journal of Netshape Forming Engineering, 2012, 4(6): 91-94.

服务与反馈：

【文章下载】【加入收藏】