锻压技术

汽车中空异形板件液压成形的实验与仿真分析

英文标题：Experiment and simulation analysis on the hydroforming of hollow plate of automobile

作者：梁鹏李健苏海迪贾宇坤何延之

分类号：TG394

出版年,卷(期):页码：2017,42(9):74-81

摘要：

为研究基于液压成形的汽车钣金件成形规律，以汽车中空异形板件为研究对象，自行设计并搭建板材液压成形实验测试系统，以此开展板件液压成形的实验研究，借助DYNAFORM有限元软件对板材液压成形进行有限元仿真分析，通过与实验测试结果的对比，验证了建立的有限元模型与数值模拟的正确性。以此为基础，探究压边力、压边力加载路径、液室压力、压边间隙和板材与凹模之间的摩擦系数等关键工艺参数对板材液压成形厚度的影响规律，提出汽车中空异形板件液压成形工艺，为板材液压成形技术在汽车钣金件成形中的应用提供参考。

For automobile sheet metal, a hydroforming experimental system was self-designed and set up, and hollow plate was investigated by experiment in order to study its hydroforming regulation. Then, its hydroforming process was simulated by the finite element software DYNAFORM, and the finite element model and the correctness of the numerical simulation were verified by comparing with the experimental results. Based on above results, the influences of key technological parameters such as blank holder force, loading path of blank holder force, liquid pressure and friction coefficient between plate and die on plate thickness of hydroforming were examined, and the hydroforming process of automobile hollow plate was put forward, which could provide a reference for the application of hydroforming in the forming of automobile parts.

基金项目：

广西自然科学基金资助项目（2016JJA160119）；柳州市科学研究与技术开发计划课题（2015C060301）；广西科技大学研究生教育创新计划项目（GKYC201619）

作者简介：梁鹏（1990-），男，硕士研究生 E-mail：lpzhuxia@126.com 通讯作者：李健（1980-），男，博士，教授 E-mail：lijian0772@126.com

参考文献：

1］孔德帅, 郎利辉, 孙志莹, 等.铝合金薄壁波纹板充液成形工艺研究[J]. 精密成形工程, 2015, 7(3):62-66.

Kong D S, Lang L H, Sun Z Y, et al. Hydroforming process of aluminum alloy thin-wall corrugated sheet[J]. Journal of Netshape Forming Engineering, 2015, 7(3):62-66.

［2］苑世剑, 刘伟, 徐永超. 板材液压成形技术与装备新进展[J]. 机械工程学报, 2015, 51(8):20-28.

Yuan S J, Liu W, Xu Y C. New development on technology and equipment of sheet hydroforming[J]. Journal of Mechanical Engineering, 2015, 51(8):20-28.

［3］Tolazzi M. Hydroforming applications in automotive: A review[J]. International Journal of Material Forming, 2010, 3(1):307-310.

［4］赵庆娟. 基于数值模拟的锥形件充液拉深工艺研究[D]. 哈尔滨: 哈尔滨理工大学, 2009.

Zhao Q J. Research on the Cylindrical Cup by Hydrodynamic Deep Drawing Based on Numerical Simulation[D]. Harbin: Harbin University of Science and Technology, 2009.

［5］高广军, 赵强. DYNAFORM数值模拟技术在冲压成形中的应用研究[J]. 模具制造, 2003, （5）:5-9.

Gao G J, Zhao Q. Application of DYNAFORM numerical simulation technology in stamping[J]. Mold Manufacturing, 2003, （5）:5-9.

［6］Modi B, Kumar D R. Development of a hydroforming setup for deep drawing of square cups with variable blank holding force technique[J]. International Journal of Advanced Manufacturing Technology, 2013, 66(5-8):1159-1169.

［7］GB/T 5028—2008, 金属材料薄板和薄带拉伸应变硬化指数(n值)的测定[S].

GB/T 5028—2008, Metallic materials—Sheet and strip—Determination of tensile strain hardening exponent[S].

［8］GB/T 5027—2007, 金属材料薄板和薄带塑性应变比(r值)的测定[S].

GB/T 5027—2007, Metallic materials—Sheet and strip—Determination of plastic strain ratio[S].

［9］Rentmeester R, Nilsson L. On mixed isotropic-distortional hardening [J]. International Journal of mechanical Sciences, 2015, 92:259-268.

［10］丁少行, 郎利辉, 黄磊. 2024铝合金难成形高锥盒形件充液成形数值模拟[J]. 精密成形工程, 2014, 6(3):31-35.

Ding S X, Lang L H, Huang L. Simulation research on hydroforming of hard forming deep taper-shaped part of 2024 aluminum alloy[J]. Journal of Netshape Forming Engineering, 2014, 6(3):31-35.

［11］窦凤楼, 李健, 袁杰, 等. 基于液压成形的钣金件实验与仿真分析[J]. 锻压技术, 2015, 40(10):24-38.

Dou F L, Li J, Yuan J, et al. Experiment and simulation analysis on sheet metal hydroforming[J]. Forging & Stamping Technology, 2015, 40(10):24-38.

［12］苑世剑. 现代液压成形技术[M]. 北京:国防工业出版社, 2009.

Yuan S J. Modern Hydraulic Forming Technology[M]. Beijing: National Defense Industry Press, 2009.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】