锻压技术

CVC冷轧机工作辊垂直-水平耦合振动分析

英文标题：Analysis on vertical and horizontal coupling vibration for working roll in CVC cold rolling mill

作者：陈晓军

单位：南通开放大学

分类号：TG331

出版年,卷(期):页码：2017,42(9):91-96

摘要：

轧机系统异常振动是影响轧件质量的主要因素。不同属性的振动共同促使了轧机系统的整体振动，辊系的垂直振动和工作辊的水平振动是较为主要的振动。根据某钢厂CVC轧机实际参数建立了轧机垂直-水平振动的动力学耦合模型并进行了求解，得到了变参数下轧机振动响应情况，通过提取钢厂轧机在线振动监测系统数据分析验证了仿真的正确性。结果显示，轧制工作辊处存在耦合振动情况，轧机系统振动特性与各种轧制工艺参数有关，对工艺参数进行适当调整可以有效地减小轧机振动。

Abnormal vibration of rolling mill system is the main factor affecting the quality of rolling stock, and the vibration of the rolling mill system is composed of various forms of vibration. However, the vertical vibration and horizontal vibration of the roller system are the main vibrations. Therefore, according to the actual parameters of a CVC mill in a steel mill, a dynamic coupling model of vertical-horizontal vibration of the mill was established and applied, and vibration responses were obtained under different variable parameters. Then, the correctness of the simulation was verified by studying the data of on-line vibration monitoring system of the rolling mill. The results show that the coupling vibration exists in the rolling work roll, and the vibration characteristics of the rolling mill are related to various rolling parameters. Thus, the proper adjustment of the process parameters can effectively reduce the vibration of rolling mill.

基金项目：

国家软科学计划科技部资助项目（2014GXS4B046）

陈晓军（1972-），男，硕士，副教授 E-mail：948735531@qq.com

参考文献：

［1］彭荣荣. 轧机辊系垂直-水平耦合振动控制机理模型与特性研究[D]. 秦皇岛：燕山大学，2014.

Peng R R.Study on the Control Mechanism Model and Characteristics of the Vertical and Horizontal Coupling Vibration of Rolling Mill [D]. Qinhuangdao: Yanshan University,2014.

［2］Sun J, Peng Y, Liu H, et al. Vertical vibration of moving strip in rolling process based on beam theory [J]. Chinese Journal of Mechanical Engineering, 2009, 22(5):680-687.

［3］Zheng Y, Xie Z, Li Y, et al. Spatial vibration of rolling mills[J]. Journal of Materials Processing Tech., 2013, 213(4):581-588.

［4］Pan J Q, Pan J, Ming R S, et al. Three-dimensional response and intensity of torsional vibration in a stepped shaft[J]. Journal of Sound & Vibration, 2000, 236(1):115-128.

［5］Sun J L，Peng Y，Liu H M. Coupling dynamic modeling of rolls model and metal model for four high mill based on strip crown control [J]. Chinese Journal of Mechanical Engineering，2013，26(1)：144-150.

［6］Liu H S, Zhang J, Mi K F, et al. Simulation on hydraulic-mechanical coupling vibration of cold strip rolling mill vertical system[J]. Advanced Materials Research, 2013, 697:407-414.

［7］闫晓强. 热连轧机机电液耦合振动控制[J]. 机械工程学报，2011，47(17)：61-65.

Yan X Q. Electro hydraulic coupling vibration control of hot strip mill [J]. Chinese Journal of Mechanical Engineering, 2011, 47 (17):61-65.

［8］闫晓强，吴先峰，杨喜恩. 热连轧机扭振与轴向振动耦合研究[J]. 工程力学，2014， 31(2)：214-218.

Yan X Q, Wu X F, Yang X E. Study on coupled torsional vibration and axial vibration of hot strip mill [J]. Engineering Mechanics, 2014,31 (2):214-218.

［9］曾令强,臧勇,郜志英,等. 轧机整体耦合建模问题研究[J]. 机械工程学报，2015，51(14)：46-53.

Zeng L Q, Zang Y, Gao Z Y, et al. Study on the integral coupling modeling of rolling mill [J]. Chinese Journal of Mechanical Engineering, 2015, 51(14):46-53.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】