锻压技术

软硬模辊式冲压模具设计及工艺优化

英文标题：Design and process optimization on soft and hard die roller stamping die

作者：刘勇

单位：宜宾职业技术学院

分类号：TG76

出版年,卷(期):页码：2017,42(9):107-111

摘要：

软硬模辊式冲压模具解决了传统钢质模辊冲装置存在的干涉问题，但在实际使用中仍存在诸多缺陷，如：上下辊的易调节操纵性差、板料冲裁加工变形大等。结合冲压模具的实际应用情况，对软硬模辊式冲压模具进行了结构改进和冲头优化设计。优化调整了下辊高度的楔形机构，保证冲压时的重叠量且更容易实现上下辊的水平度；将辊式冲压机上的平刃口圆柱冲头改为中空内斜刃冲头，减小了冲压后产生的塌陷深度，提高了板料的平整度。经计算仿真和实验验证，表明本文所提出的优化方案切实可行，能够有效提高冲压质量。

The interference problem of traditional steel die roller stamping device has been solved by the soft and hard die roller stamping die, but there are still many defects in practice, such as the difficulty in adjusting upper and lower rollers and the large deformation in blanking of the sheet metal. Therefore, combined with the actual application of stamping die, the structure of the soft and hard die roller stamping die was improved, and the design of punch was optimized. Then, the wedge mechanism of lower roller height was optimized and adjusted to ensure the amount of overlap and achieve the levelness of the upper and lower rollers easily. Furthermore, the cylindrical punch of the flat edge in the roller press was changed into a hollow inner inclined blade punch to reduce the collapse depth after stamping and improve the flatness of sheet metal. The simulation and experimental results show that the proposed optimization scheme is feasible and can effectively improve the quality of stamping.

基金项目：

四川省教育厅科研课题（17ZB0501）

刘勇（1986-），男，硕士，讲师 E-mail：yong_eagle@sina.com

参考文献：

［1］Quan G Z, Zhan Z Y, Zhang L, et al. A study on the multi-phase transformation kinetics of ultra-high-strength steel and application in thermal-mechanical-phase coupling simulation of hot stamping process[J]. Materials Science & Engineering A, 2016, 673:24-38.

［2］陈德道，杨晋，安虎平.四辊卷板机最小弯卷半径控制模型的研究[J]. 锻压技术，2016，41（1）：77-82.

Chen D D，Yang J，An H P. Research on the control model of minimum radius for rolling on bending-plate machine with four-roll [J]. Forging & Stamping Technology，2016，41（1）：77-82.

［3］张丽英，贾增耀，苏俭华，等. 液压滚切剪在不同剪切速度下剪切过程数值模拟与实验研究[J]. 塑性工程学报 , 2016, 23 (5):209-215.

Zhang L Y, Jia Z Y, Su J H, et al. Simulation and experimental research on cutting process of hydraulic rolling-cut shear with different cutting speeds [J]. Journal of Plasticity Engineering, 2016, 23 (5) :209-215.

［4］杜雁冰, 韩静涛, 张永军,等. 在线辊式冲孔模具的设计与模拟研究[J]. 锻压技术, 2011, 36(4):106-110.

Du Y B, Han J T, Zhang Y J, et al. Mould design and simulation of online roller punching[J]. Forging & Stamping Technology, 2011, 36(4): 106-110.

［5］刘倩，刘靖，杨德望，等.基于剪切修正GTN损伤模型的辊冲工艺数值模拟[J].工程科学学报，2016, 38(3)：401-409.

Liu Q, Liu J, Yang D W, et al. Finite element simulation of rotary blanking based on a modified GTN damage model [J]. Journal of Engineering Science, 2016, 38(3): 401-409.

［6］赵英彪, 付建华, 雷步芳,等. 板料辊式冲孔机结构分析与优化[J]. 锻压装备与制造技术, 2007, 42(1):24-26.

Zhao Y B, Fu J H, Lei B F, et al. Structure analysis and optimization of rolling punch [J]. China Metalforming Equipment & Manufacturing Technology, 2007, 42(1): 24-26.

［7］付建华.辊式精冲机初步探讨[J].山西机械，2002,(2)：9-10.

Fu J H. Preliminary discussion on roll type fine blanking machine [J]. Shanxi Machinery, 2002,(2)：9-10.

［8］赵英彪，付建华，雷步芳，等.辊式冲孔机凸模形状的优化[J].机械工程与自动化，2007, (1)：84-86.

Zhao Y B, Fu J H, Lei B F, et al. Optimization of convex-mold shape of rolling punch [J]. Mechanical Engineering & Automation, 2007, (1): 84-86.

［9］付志强.Rotary Punch（滚冲）工艺的技术研究与实验[D].北京：北方工业大学，2010.

Fu Z Q. The Research and Experiment on Technology of Rotary Punch[J].Beijing: North China University of Technology, 2010.

［10］赵鹏展，魏良庆.异形齿盘毂热锻成形工艺数值模拟与优化设计[J]. 锻压技术，2016，41（1）：146-149.

Zhao P Z，Wei L Q. Optimization design and numerical simulation of hot forging process for special tooth disc-hub [J]. Forging & Stamping Technology，2016，41（1）：146-149.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】